液芯压下工艺对CSP生产高强耐候钢力学性能的影响

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

液芯压下工艺对CSP生产高强耐候钢力学性能的影响

苏亮, 田乃媛, 毛新平, 林振源

文章导航 > 钢铁钒钛 > 2008 > 29(2): 14-17

苏亮, 田乃媛, 毛新平, 林振源. 液芯压下工艺对CSP生产高强耐候钢力学性能的影响[J]. 钢铁钒钛, 2008, 29(2): 14-17.

引用本文:

苏亮, 田乃媛, 毛新平, 林振源. 液芯压下工艺对CSP生产高强耐候钢力学性能的影响[J]. 钢铁钒钛, 2008, 29(2): 14-17.

SU Liang, TIAN Naiyuan, MAO Xinping, LIN Zhenyuan. Influence of Liquid Core Reduction on Mechanical Properties of High Strength Weathering Steels in Thin Slab Casting and Direct Rolling Process[J]. IRON STEEL VANADIUM TITANIUM, 2008, 29(2): 14-17.

Citation:

SU Liang, TIAN Naiyuan, MAO Xinping, LIN Zhenyuan. Influence of Liquid Core Reduction on Mechanical Properties of High Strength Weathering Steels in Thin Slab Casting and Direct Rolling Process[J]. IRON STEEL VANADIUM TITANIUM, 2008, 29(2): 14-17.

苏亮, 田乃媛, 毛新平, 林振源. 液芯压下工艺对CSP生产高强耐候钢力学性能的影响[J]. 钢铁钒钛, 2008, 29(2): 14-17.

引用本文:

苏亮, 田乃媛, 毛新平, 林振源. 液芯压下工艺对CSP生产高强耐候钢力学性能的影响[J]. 钢铁钒钛, 2008, 29(2): 14-17.

SU Liang, TIAN Naiyuan, MAO Xinping, LIN Zhenyuan. Influence of Liquid Core Reduction on Mechanical Properties of High Strength Weathering Steels in Thin Slab Casting and Direct Rolling Process[J]. IRON STEEL VANADIUM TITANIUM, 2008, 29(2): 14-17.

Citation:

SU Liang, TIAN Naiyuan, MAO Xinping, LIN Zhenyuan. Influence of Liquid Core Reduction on Mechanical Properties of High Strength Weathering Steels in Thin Slab Casting and Direct Rolling Process[J]. IRON STEEL VANADIUM TITANIUM, 2008, 29(2): 14-17.

液芯压下工艺对CSP生产高强耐候钢力学性能的影响

1. 北京科技大学冶金与生态工程学院, 北京 100083;
2. 珠江钢铁有限责任公司, 广东广州, 510381

作者简介:
苏亮(1981-),男,山东滨州人,北京科技大学博士研究生,主要从事薄板坯连铸连轧研究工作。

中图分类号: TF777.7
计量
- 文章访问数: 25
- HTML全文浏览量: 2
- PDF下载量: 1
- 被引次数: 0
出版历程
- 收稿日期: 2007-11-08

Influence of Liquid Core Reduction on Mechanical Properties of High Strength Weathering Steels in Thin Slab Casting and Direct Rolling Process

1. School of Metallurgical and Ecological Engineering, Beijing University of Science and Technology, Beijing 100083, China;
2. Zhujiang Steel Co., Ltd., Guangzhou 510381, Guangdong, China

摘要: 珠钢在CSP流程上首次成功开发了钛微合金化高强耐候钢。通过对比采用液芯压下工艺(压下量5 mm、10mm)和非液芯压下工艺条件下铸坯和成品板的力学性能及组织,探讨了两种工艺的异同以及对铸坯和成品材的组织、性能的影响。认为采用液芯压下工艺可以很好地匹配连铸与连轧间的坯厚,铸坯各向性能更均匀,成品板材综合性能好于非液芯压下工艺。
- 薄板坯连铸连轧 /
- 高强耐候钢 /
- 液芯压下 /
- 力学性能
Abstract: Ti-microalloyed High Strength Weathering Steel was first produced by CSP process at Zhujiang Steel Co.,Ltd.,Effects of two different processes(with LCR or without LCR) on the mechanical properties and microstructure of the slab and strip were discussed.The results showed that all strips were of very fine microstructure and excellent mechanical property,but mechanical properties of slab by LCR are more homegeneous,properties of strip are slightly better contrast with one of without LCR.And thickness of continuous casting slab just fit with direct rolling.
- thin slab casting and direct rolling /
- high strength weathering steel /
- liquid core reduction /
- mechanical property

参考文献(0)

资源附件(0)

WeChat

点击查看大图

计量

文章访问数: 25
HTML全文浏览量: 2
PDF下载量: 1
被引次数: 0

/

下载: 全尺寸图片幻灯片

分享

用微信扫码二维码

分享至好友和朋友圈

返回

本系统由北京仁和汇智信息技术有限公司开发

x 关闭永久关闭

《钢铁钒钛》期刊新投审稿
系统上线公告