攀钢板坯连铸结晶器内流场的水力学模拟研究

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

攀钢板坯连铸结晶器内流场的水力学模拟研究

马范军, 文光华, 李刚, 赵克文, 宋国菊, 王军, 赵启成

文章导航 > 钢铁钒钛 > 1999 > 20(1): 11-15

马范军, 文光华, 李刚, 赵克文, 宋国菊, 王军, 赵启成. 攀钢板坯连铸结晶器内流场的水力学模拟研究[J]. 钢铁钒钛, 1999, 20(1): 11-15.

引用本文:

马范军, 文光华, 李刚, 赵克文, 宋国菊, 王军, 赵启成. 攀钢板坯连铸结晶器内流场的水力学模拟研究[J]. 钢铁钒钛, 1999, 20(1): 11-15.

Ma Fanjun, Wen Guanghua, Li Gang, Zhao Kewen, Song Guoju, Wang Jun, Zhao Qicheng. WATER MODELLING OF FLUID FLOW PATTERN IN SLAB CONTINUOUS CASTER MOLD AT PANGANG[J]. IRON STEEL VANADIUM TITANIUM, 1999, 20(1): 11-15.

Citation:

Ma Fanjun, Wen Guanghua, Li Gang, Zhao Kewen, Song Guoju, Wang Jun, Zhao Qicheng. WATER MODELLING OF FLUID FLOW PATTERN IN SLAB CONTINUOUS CASTER MOLD AT PANGANG[J]. IRON STEEL VANADIUM TITANIUM, 1999, 20(1): 11-15.

马范军, 文光华, 李刚, 赵克文, 宋国菊, 王军, 赵启成. 攀钢板坯连铸结晶器内流场的水力学模拟研究[J]. 钢铁钒钛, 1999, 20(1): 11-15.

引用本文:

马范军, 文光华, 李刚, 赵克文, 宋国菊, 王军, 赵启成. 攀钢板坯连铸结晶器内流场的水力学模拟研究[J]. 钢铁钒钛, 1999, 20(1): 11-15.

Ma Fanjun, Wen Guanghua, Li Gang, Zhao Kewen, Song Guoju, Wang Jun, Zhao Qicheng. WATER MODELLING OF FLUID FLOW PATTERN IN SLAB CONTINUOUS CASTER MOLD AT PANGANG[J]. IRON STEEL VANADIUM TITANIUM, 1999, 20(1): 11-15.

Citation:

Ma Fanjun, Wen Guanghua, Li Gang, Zhao Kewen, Song Guoju, Wang Jun, Zhao Qicheng. WATER MODELLING OF FLUID FLOW PATTERN IN SLAB CONTINUOUS CASTER MOLD AT PANGANG[J]. IRON STEEL VANADIUM TITANIUM, 1999, 20(1): 11-15.

攀钢板坯连铸结晶器内流场的水力学模拟研究

1. 重庆大学;
2. 攀枝花钢铁公司

计量
- 文章访问数: 23
- HTML全文浏览量: 5
- PDF下载量: 1
- 被引次数: 0
出版历程
- 收稿日期: 1998-11-03

WATER MODELLING OF FLUID FLOW PATTERN IN SLAB CONTINUOUS CASTER MOLD AT PANGANG

1. Chongqing University;
2. Panzhihua Iron & Steel Co.

摘要: 采用水力学模拟方法研究攀钢板坯连铸结晶器内流场，分析浸入式水口结构尺寸、塞棒吹Ar量和拉速等工艺参数对连铸结晶器内钢液流动状况的影响，在此基础上优选出适合攀钢板坯连铸工艺的浸入式水口结构尺寸及相关参数。
- 板坯连铸 /
- 水力学模拟 /
- 结晶器 /
- 流场 /
- 浸入式水口
Abstract: The fluid flow field in the mold of slab continuous caster at Pangang was investigated by means of water model.The effects of technical parameters, such as the structure and size of submerged entry nozzle, argon flow rate through stopper, and casting speed etc, on the fluid flow pattern in the mold were analyzed. Based on results obtained, the structure and size of submerged entry nozzle, and related technical parameters suitable for slab continuous casting process were optimized.
- slab continuous casting /
- water model /
- mold /
- flow field /
- submerged entry nozzle

参考文献(0)

资源附件(0)

WeChat

点击查看大图

计量

文章访问数: 23
HTML全文浏览量: 5
PDF下载量: 1
被引次数: 0

/

下载: 全尺寸图片幻灯片

分享

用微信扫码二维码

分享至好友和朋友圈

返回

本系统由北京仁和汇智信息技术有限公司开发

x 关闭永久关闭

《钢铁钒钛》期刊新投审稿
系统上线公告