Research on Water Model of Mold Level Fluctuation
-
摘要: 首次提出用波差来评价液面波动的大小。针对国内某厂的连铸机结晶器,采用1:1的水模型研究了水口角度、浸入深度和铸坯宽度变化对波差的影响,得出了距结晶器窄面不同位置的理想液面波动所对应的工艺参数。Abstract: The wave difference was firstly applied to evaluate the mold level fluctuation. According to the continuous casting mold of a plant, the water model was made in the proportion to 1:1 from slab mold, and the effects of SEN angle, entry depth and mold width on the wave difference were studied. The technical parameters, which guarantee the most perfect fluctuation at various location of mold, were presented based on a great deal of experimental data.
-
Key words:
- continuous casting /
- mold /
- wave difference /
- mold level fluctuation /
- water model
-
点击查看大图
计量
- 文章访问数: 27
- HTML全文浏览量: 8
- PDF下载量: 1
- 被引次数: 0
下载:
