薄板坯连铸结晶器流场模拟和验证

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

薄板坯连铸结晶器流场模拟和验证

张桂芳, 沈厚发, 王镭, 柳百成

文章导航 > 钢铁钒钛 > 2005 > 26(2): 31-34,53

张桂芳, 沈厚发, 王镭, 柳百成. 薄板坯连铸结晶器流场模拟和验证[J]. 钢铁钒钛, 2005, 26(2): 31-34,53.

引用本文:

张桂芳, 沈厚发, 王镭, 柳百成. 薄板坯连铸结晶器流场模拟和验证[J]. 钢铁钒钛, 2005, 26(2): 31-34,53.

Zhang Guifang, Shen Houfa, Wang Lei, Liu Baicheng. Simulation and Validation on Flow Field in Thin Slab Continuous Casting Mold[J]. IRON STEEL VANADIUM TITANIUM, 2005, 26(2): 31-34,53.

Citation:

Zhang Guifang, Shen Houfa, Wang Lei, Liu Baicheng. Simulation and Validation on Flow Field in Thin Slab Continuous Casting Mold[J]. IRON STEEL VANADIUM TITANIUM, 2005, 26(2): 31-34,53.

张桂芳, 沈厚发, 王镭, 柳百成. 薄板坯连铸结晶器流场模拟和验证[J]. 钢铁钒钛, 2005, 26(2): 31-34,53.

引用本文:

张桂芳, 沈厚发, 王镭, 柳百成. 薄板坯连铸结晶器流场模拟和验证[J]. 钢铁钒钛, 2005, 26(2): 31-34,53.

Zhang Guifang, Shen Houfa, Wang Lei, Liu Baicheng. Simulation and Validation on Flow Field in Thin Slab Continuous Casting Mold[J]. IRON STEEL VANADIUM TITANIUM, 2005, 26(2): 31-34,53.

Citation:

Zhang Guifang, Shen Houfa, Wang Lei, Liu Baicheng. Simulation and Validation on Flow Field in Thin Slab Continuous Casting Mold[J]. IRON STEEL VANADIUM TITANIUM, 2005, 26(2): 31-34,53.

薄板坯连铸结晶器流场模拟和验证

1. 清华大学机械系, 北京 100084;
2. 攀枝花钢铁研究院, 四川攀枝花 617000

基金项目:

国家自然科学基金资助项目(项目编号:50474088)。

作者简介:
张桂芳(1965-),女,河南焦作人,昆明理工大学副教授,在站博士后,主要从事材料加工研究

中图分类号: TF777.7
计量
- 文章访问数: 34
- HTML全文浏览量: 7
- PDF下载量: 1
- 被引次数: 0
出版历程
- 收稿日期: 2005-01-27
- 网络出版日期: 2023-12-06
- 刊出日期: 2005-04-30

Simulation and Validation on Flow Field in Thin Slab Continuous Casting Mold

1. Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China;
2. Panzhihua Iron and Steel Research Institute, Panzhihua 617000, Sichuan, China

摘要: 针对薄板坯连铸结晶器内钢液的流动特征,利用有限差分方法对薄板坯结晶器内钢液的流动进行了模拟,建立了结晶器内三维流动的数学模型,模拟了复杂水口结构对结晶器中钢液流动的影响。通过水力学模拟对流场模拟进行了验证。结果表明:流场模拟能够准确反映具有复杂水口结构特点的结晶器中的流动现象。
- 薄板坯连铸 /
- 结晶器 /
- 流场 /
- 数值模拟
Abstract: By using the finite difference method, the flow field in thin slab continuous casting mold was simulated according to the flow characteristics of liquid steel. The three-dimensional flow field model was set up. The effects of complex nuzzle structure on the flow field in the mold was simulated. The simulated flow field was validated by means of hydraulic model. The results show that the simulated flow field could report the fluid flow in mold with complex nuzzle structure.
- thin slab continuous casting /
- mold /
- flow field /
- numerical simulation

参考文献(0)

资源附件(0)

WeChat

点击查看大图

计量

文章访问数: 34
HTML全文浏览量: 7
PDF下载量: 1
被引次数: 0

/

下载: 全尺寸图片幻灯片

分享

用微信扫码二维码

分享至好友和朋友圈

返回

本系统由北京仁和汇智信息技术有限公司开发

x 关闭永久关闭

《钢铁钒钛》期刊新投审稿
系统上线公告