板坯连铸结晶器工艺参数优化的水模拟研究

熊椰; 成泽伟; 陈伟庆; 唐生斌; 刘丽

doi:10.7513/j.issn.1004-7638.2014.03.017

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名

邮箱

手机号码

标题

留言内容

验证码

板坯连铸结晶器工艺参数优化的水模拟研究

doi: 10.7513/j.issn.1004-7638.2014.03.017

1. 北京科技大学冶金与生态工程学院, 北京 100083;
2. 攀钢集团西昌钢钒有限公司炼钢厂, 四川西昌 615000;
3. 北京利尔高温材料股份有限公司, 北京 102211

详细信息

作者简介:
熊椰 (1986-), 男, 湖北武汉人, 硕士, 主要从事连铸坯质量控制研究

中图分类号: TF777
计量
- 文章访问数: 17
- HTML全文浏览量: 6
- PDF下载量: 0
- 被引次数: 0
出版历程
- 收稿日期: 2014-03-20

Research on Process Parameters Optimization for Slab Continuous Casting Mold by Water Modeling

1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China;
2. Pangang Group Xichang Steel and Vanadium Co. Ltd., Xichang 615000, Sichuan, China;
3. Beijing LiEr High Temperature Materials Co. Ltd., Beijing 102211, China

摘要

摘要: 以某钢厂连铸板坯结晶器为原型,采取1:1水模型研究板坯连铸拉速、结晶器宽度、水口浸入深度、水口开口倾角、水口出口形状对结晶器流场及其液面波动情况的影响。结果表明:随着结晶器宽度、拉速的增加,液面波动明显增大;浸入式水口采用较大出口倾角和浸入深度以及采用椭圆形浸入式水口出口可控制结晶器液面波动以避免卷渣。研究结果为板坯连铸结晶器实际工艺参数的确定提供了参考依据。
- 板坯连铸 /
- 结晶器 /
- 浸入式水口 /
- 流场 /
- 液面波动
Abstract: The effects of casting speed,width of mold,depth of submerged entry nozzle,nozzle port angle,and shape of port nozzle on the flow field and the surface flow fluctuation of the slab continuous caster from a steelmaking plant were investigated by means of a water model test with a radio of 1:1 for the purpose of providing a guidance for improving the production parameters of the slab continuous casting mold.The results showed that the surface flow fluctuation level significantly increased with increase of the width of the mold and the casting speed.Meanwhile,the surface fluctuation could be controlled by adopting a new designed nozzle with a larger outlet angel and a deeper immersion depth and an oval port,and consequently the entrainment of slag was avoided effectively.
- slab continuous casting /
- mold /
- submerged entry nozzle /
- flow fluid /
- surface fluctuation