20G钢氧化物夹杂控制及钙处理热力学研究

高菊; 马立兴; 韩鹏龙; 高春群

doi:10.7513/j.issn.1004-7638.2014.03.019

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名

邮箱

手机号码

标题

留言内容

验证码

20G钢氧化物夹杂控制及钙处理热力学研究

doi: 10.7513/j.issn.1004-7638.2014.03.019

1. 河北联合大学迁安学院, 河北迁安 064400;
2. 邢台钢铁有限责任公司, 河北邢台 054027;
3. 河北联合大学冶金与能源学院, 河北唐山 063009

详细信息

作者简介:
高菊 (1980-), 女, 河北唐山人, 硕士, 主要从事凝固理论与钢质量控制研究

通讯作者:
韩鹏龙 (1987-), 男, 河北石家庄人, 硕士, 主要从事凝固理论与钢质量控制研究, E-mail:hanpenglong2008@163.com

中图分类号: TF762
计量
- 文章访问数: 20
- HTML全文浏览量: 6
- PDF下载量: 0
- 被引次数: 0
出版历程
- 收稿日期: 2014-04-02

Research on 20G Steel Oxide Inclusion Control and Calcium Treatment via Thermodynamics Method

1. School of Qian'an, Hebei United Univerty, Qian'an 064400, Hebei, China;
2. Xingtai Iron and Steel Company, Xingtai 054027, Heibei, China;
3. College of Metallurgy and Energy, Hebei United University, Tangshan 063009, Hebei, China

摘要

摘要: 某厂20G钢在生产初期,存在裂纹缺陷,低倍检验不合格,严重影响了20G钢的质量,使轧制合格率和成材率降低。为了解决20G钢裂纹问题,提高钢材质量,同时进一步提高技术水平,稳定产品质量,用热力学方法分析20G钢脱氧时可能析出的一次脱氧产物的平衡组成与钢液成分之间的关系,形成的脱氧产物主要是Al₂O₃和SiO₂,并通过分析金属与夹杂物之间的平衡关系,计算钙处理夹杂物变性时钙、铝、氧、硫活度的变化,分析夹杂物的变性路径,为夹杂物的形成、夹杂物的形态控制或去除提供理论依据。
- 20G钢 /
- 夹杂物 /
- 钙处理 /
- 热力学
Abstract: During the early stage of producing grade 20G steel,crack defects and macro-structure defects were frequently observed which were expected to decrease rolling qualified rate and yield.In order to solve the crack problem and to improve steel product quality,a thermodynamics method was used to determinate the relationship between equilibrium composition of possible first deoxidizing product and liquid steel compostion in the processes of first deoxidation where Al₂O₃ and SiO₂ dominate.Then activity changes of calcium,aluminum,oxygenium and sulphur had been calculated inclusion modification path had been determinated during calcium treatment which can provides theoretical basis for inclusion formation,modification and removal.
- 20G steel /
- inclusions /
- calcium treatment /
- thermodynamics