留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

热处理工艺对Cr12MoV钢组织及硬度的影响

杜思敏 李雄 林发驹

杜思敏, 李雄, 林发驹. 热处理工艺对Cr12MoV钢组织及硬度的影响[J]. 钢铁钒钛, 2021, 42(3): 148-154. doi: 10.7513/j.issn.1004-7638.2021.03.023
引用本文: 杜思敏, 李雄, 林发驹. 热处理工艺对Cr12MoV钢组织及硬度的影响[J]. 钢铁钒钛, 2021, 42(3): 148-154. doi: 10.7513/j.issn.1004-7638.2021.03.023
Du Simin, Li Xiong, Lin Faju. Effect of heat treatment process on microstructure and hardness of Cr12MoV steel[J]. IRON STEEL VANADIUM TITANIUM, 2021, 42(3): 148-154. doi: 10.7513/j.issn.1004-7638.2021.03.023
Citation: Du Simin, Li Xiong, Lin Faju. Effect of heat treatment process on microstructure and hardness of Cr12MoV steel[J]. IRON STEEL VANADIUM TITANIUM, 2021, 42(3): 148-154. doi: 10.7513/j.issn.1004-7638.2021.03.023

热处理工艺对Cr12MoV钢组织及硬度的影响

doi: 10.7513/j.issn.1004-7638.2021.03.023
详细信息
    作者简介:

    杜思敏(1986—),女,云南彝良人,工程师,本科,主要从事特殊钢的热加工及热处理工艺研究, E-mail:2926747855@qq.com。

  • 中图分类号: TF76,TG161

Effect of heat treatment process on microstructure and hardness of Cr12MoV steel

  • 摘要: 采用金相显微镜、XRD射线衍射仪及维氏硬度计等,研究了普通热处理和深冷处理工艺对Cr12MoV钢显微组织及硬度的影响。结果表明:Cr12MoV钢经普通热处理和深冷处理淬火后的组织均为隐针马氏体+残余奥氏体+碳化物,200 ℃低温回火后组织转变为回火马氏体+碳化物+残余奥氏体。深冷处理可大幅减少钢中残余奥氏体,提升钢的硬度;热处理采用1020 ℃加热保温60 min淬火+(−196 ℃)深冷2 h+200 ℃回火保温120 min,硬度(HV30)值最高,可达780。
  • 图  1  试验钢不同热处理工艺淬火及深冷组织

    Figure  1.  Quenching and cryogenic microstructure of tested steel after different heat treatment processes

    图  2  试验钢不同热处理工艺对残余奥氏体含量的影响

    Figure  2.  Effect of different heat treatment processes on retained austenite of test steel

    图  3  试验钢不同热处理工艺回火组织

    Figure  3.  Microstructure of temperedt steel with different heat treatment processes

    图  4  试验钢不同奥氏体化温度与硬度的关系

    Figure  4.  Relationship between austenitic temperature and hardness of test steel by different heat treatment processes

    图  5  试验钢不同奥氏体化保温时间与硬度的关系

    Figure  5.  Relationship between austenitic holding time and hardness of test steel by different heat treatment processes

    图  6  试验钢不同深冷处理时间与硬度的关系

    Figure  6.  Relationship between hardness and cryogenic time of test steel by different heat treatment processes

    表  1  Cr12MoV钢的主要化学成分

    Table  1.   Main chemical compositions of Cr12MoV steel %

    CSiMnPSCrMoV
    1.460.250.330.0250.00111.670.410.2
    下载: 导出CSV

    表  2  Cr12MoV钢的热处理工艺

    Table  2.   Heat treatment processes of Cr12MoV steel

    试样号奥氏体化温度/℃保温时间/min深冷时间/h回火温度/℃回火保温时间/min备注
    1 950 30 200 120  
    2 980 30 200 120  
    3 1000 30 200 120  
    4 1020 30 200 120  
    5 1020 60 200 120  
    6 1020 120 200 120  
    7 1050 30 200 120  
    1-2 950 30 2 200 120 深冷处理
    2-2 980 30 2 200 120 深冷处理
    3-2 1000 30 2 200 120 深冷处理
    4-2 1020 30 2 200 120 深冷处理
    5-2 1020 60 2 200 120 深冷处理
    5-4 1020 60 4 200 120 深冷处理
    5-8 1020 60 8 200 120 深冷处理
    6-2 1020 120 2 200 120 深冷处理
    7-2 1050 30 2 200 120 深冷处理
    注:淬火冷却方式均为油冷,深冷处理均为(−196 ℃)液氮浸泡冷却。
    下载: 导出CSV
  • [1] Yan Lijing, Feng Jing, Zhang Yanhua, et al. Effect of heat treatment process on microstructure and mechanical properties of Cr12MoV cold extrusion die steel[J]. Hot Working Technology, 2017,46(2):205−207. (闫丽静, 冯婧, 张艳华, 等. 热处理工艺对Cr12MoV冷挤压模具钢组织和力学性能的影响[J]. 热加工工艺, 2017,46(2):205−207.
    [2] Yang Weiwei, Song Guangli, Xu Lei. Effects of cryogenic treatment on properties of triangle cam made of Cr12MoV steel[J]. New Technology & New Process, 2014,(12):62−64. (杨伟伟, 宋广礼, 徐磊. 深冷处理对三角材质Cr12MoV钢性能的影响[J]. 新技术新工艺, 2014,(12):62−64. doi: 10.3969/j.issn.1003-5311.2014.12.021
    [3] Zou Jilin. Application of surface strengthening technology in die cavity[J]. Die & Mould Industry, 2001,(5):44−47. (邹济林. 表面强化技术在模具型腔的应用[J]. 模具工业, 2001,(5):44−47. doi: 10.3969/j.issn.1001-2168.2001.05.018
    [4] Zhou Jin’en. Selection and heat treatment of die materials and service life of dies[J]. Heat Treatment of Metals, 1999,(5):129. (周敬恩. 模具材料选用、热处理与使用寿命[J]. 金属热处理, 1999,(5):129.
    [5] Yang Xuesong. Review of medium low alloy wear resistant steel[J]. Science and Technology Innovation Herald, 2007,18(3):34−71. (杨雪松. 中低合金耐磨钢综述[J]. 科技创新导报, 2007,18(3):34−71. doi: 10.3969/j.issn.1674-098X.2007.03.027
    [6] (段春争. 高速钢深冷处理工艺及机理研究[D]. 兰州: 甘肃工业大学, 2000.)

    Duan Chunzheng. Study on cryogenic treatment process and mechanism of high speed steel[D]. Lanzhou: Gansu Polytechnical University, 2000.
    [7] Mohanlal D, Renganarayanan S, Kalanidhi A. Cryogenictreatment to augment wear resistance of tool and die steels[J]. Cryogenics, 2001,41:149−155. doi: 10.1016/S0011-2275(01)00065-0
    [8] Li S H, Min N, Deng L H, et al. Influence of deep cryogenic treatment on internal friction behavior in the process of tempering[J]. Materials Science and Engineering, 2011,528:1247−1250. doi: 10.1016/j.msea.2010.10.012
    [9] Lv Yanwen, Yan Xianguo, Han Xiaojun, et al. Effect of cryogenic treatment on hardness and microstructure of W6Mo5Cr4V2 high speed steel[J]. Hot Working Technology, 2015,44(8):174. (吕雁文, 闫献国, 韩晓君, 等. 深冷处理对W6Mo5Cr4V2高速钢硬度及组织的影响[J]. 热加工工艺, 2015,44(8):174.
    [10] Chi Hongxiao, Ma Dangshen, Wang Chang, et al. Study on secondary hardening mechanism of Cr8Mo2SiV steel[J]. Acta Metallurgica Sinica, 2010,46(10):1181. (迟宏宵, 马党参, 王昌, 等. Cr8Mo2SiV钢二次硬化机理的研究[J]. 金属学报, 2010,46(10):1181.
  • 加载中
图(6) / 表(2)
计量
  • 文章访问数:  303
  • HTML全文浏览量:  60
  • PDF下载量:  40
  • 被引次数: 0
出版历程
  • 收稿日期:  2021-03-24
  • 刊出日期:  2021-06-10

目录

    /

    返回文章
    返回