Zhao Dingguo, Zhang Fujun, Wang Yufei, Wang Shuhuan. Influence of Adsorption Rod Material on Removal of Inclusions in the Nozzle[J]. IRON STEEL VANADIUM TITANIUM, 2019, 40(1): 105-111. doi: 10.7513/j.issn.1004-7638.2019.01.019
Citation:
Zhao Dingguo, Zhang Fujun, Wang Yufei, Wang Shuhuan. Influence of Adsorption Rod Material on Removal of Inclusions in the Nozzle[J]. IRON STEEL VANADIUM TITANIUM, 2019, 40(1): 105-111. doi: 10.7513/j.issn.1004-7638.2019.01.019
Zhao Dingguo, Zhang Fujun, Wang Yufei, Wang Shuhuan. Influence of Adsorption Rod Material on Removal of Inclusions in the Nozzle[J]. IRON STEEL VANADIUM TITANIUM, 2019, 40(1): 105-111. doi: 10.7513/j.issn.1004-7638.2019.01.019
Citation:
Zhao Dingguo, Zhang Fujun, Wang Yufei, Wang Shuhuan. Influence of Adsorption Rod Material on Removal of Inclusions in the Nozzle[J]. IRON STEEL VANADIUM TITANIUM, 2019, 40(1): 105-111. doi: 10.7513/j.issn.1004-7638.2019.01.019
1. College of Metallurgy and Energy, North China University of Science and Technology, Tangshan Key Laboratory of Special Metallurgy and Materials Manufactory, Tangshan 063210, Hebei, China;
2. Hegang Group Steel Research Institute, Shijiazhuang 052165, Hebei, China
Through thermal experiments,the adsorption of impurities in molten steel under the condition of aluminum deoxidation was studied on the three kinds of adsorption rods,ie,magnesium-zirconium,magnesium-chromium and magnesium-calcium.The experimental results show that from the aspects of the number of inclusions,area ratio and adsorption rate per unit area,the adsorption capacity of magnesium calcium adsorption rods on inclusions in liquid steel is stronger than that of magnesium zirconium and magnesium chromium adsorption rods.The number of inclusions per unit area at the middle and edge of the sample reduced by 29.66% and 39.26% compared with the original deoxidized steel ingot,and the area ratio reduced by 56.83% and 64.33%.The inclusion absorption velocity was 0.34 μm/s.