Preparation of fibrous titanium-lithium ion sieve precursor with skin collagen as the template

Wu Yuanbin; Yang Ru; Deng Shenglian; Zhang Liyuan

doi:10.7513/j.issn.1004-7638.2021.02.010

Volume 42 Issue 2

Apr. 2021

Turn off MathJax

Article Contents

Article Navigation > IRON STEEL VANADIUM TITANIUM > 2021 > 42(2): 53-59

Wu Yuanbin, Yang Ru, Deng Shenglian, Zhang Liyuan. Preparation of fibrous titanium-lithium ion sieve precursor with skin collagen as the template[J]. IRON STEEL VANADIUM TITANIUM, 2021, 42(2): 53-59. doi: 10.7513/j.issn.1004-7638.2021.02.010

Citation:

Wu Yuanbin, Yang Ru, Deng Shenglian, Zhang Liyuan. Preparation of fibrous titanium-lithium ion sieve precursor with skin collagen as the template[J]. IRON STEEL VANADIUM TITANIUM, 2021, 42(2): 53-59. doi: 10.7513/j.issn.1004-7638.2021.02.010

Citation:

PDF( 918 KB)

Preparation of fibrous titanium-lithium ion sieve precursor with skin collagen as the template

doi: 10.7513/j.issn.1004-7638.2021.02.010

Wu Yuanbin^{1, 2, 3
,},
Yang Ru¹,
Deng Shenglian¹,
Zhang Liyuan^{1, 2, 3
,
,}

1.
College of Chemistry and Chemical Engineering, Neijiang Normal University, Neijiang 641112, Sichuan, China
2.
Key Laboratory of Fruit Waste Treatment and Resource Recycling of the Sichuan Provincial College, Neijiang 641112, Sichuan, China
3.
Academician (Expert) Workstation of Neijiang Normal University, Neijiang 641112, Sichuan, China

Received Date: 2021-02-24
Publish Date: 2021-04-10

Abstract

Abstract

In order to solve the poor permeability and fluidity of traditional powder titanium-lithium ion sieve, fibrous precursor of titanium-lithium ion sieve (Li₂TiO₃) was prepared via the solid-state reaction with skin collagen as the template, Ti(SO₄)₂ and lithium acetate as the titanium and lithium source respectively. The effects of reagent, treatment method and pH value on the synthesis of titanium-lithium ion sieve precursor were investigated. The samples were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results show that a good fibrous precursor of titanium-lithium ion sieve can be obtained by adding tannin, controlling pH=4.0 and holding at 750 ℃ for 8 h, with the obtained sample composed of monoclinic β-Li₂TiO₃.
- titanium-lithium ion sieve,
- precursor,
- collagen,
- fiber structure,
- tannin

FullText(HTML)

References(31)

References

[1]	Xu X, Chen Y, Wan P, et al. Extraction of lithium with functionalized lithium ion-sieves[J]. Progress in Materials Science, 2016,(84):276−313.
[2]	Gruber P W, Medina P A, Keoleian G A, et al. Global lithium availability, a constraint for electric vehicles[J]. Journal of Industrial Ecology, 2011,15(5):760−775. doi: 10.1111/j.1530-9290.2011.00359.x
[3]	Grosjean C, MirandaI P H, Perrin M, et al. Assessment of world lithium resources and consequences of their geographic distribution on the expected development of the electric vehicle industry[J]. Renewable and Sustainable Energy Reviews, 2012,16(3):1735−1744. doi: 10.1016/j.rser.2011.11.023
[4]	Ogawa Y, Koibuchi H, Suto K, et al. Effects of the chemical compositions of salars de Uyuni and Atacama brines on lithium concentration during evaporation[J]. Resource Geology, 2014,4(2):91−101.
[5]	Meshram P, Pandey B D, Mankhand T R. Extraction of lithium from primary and secondary sources by pre-treatment, leaching and separation: a comprehensive review[J]. Hydrometallurgy, 2014,150:192−208. doi: 10.1016/j.hydromet.2014.10.012
[6]	Liu Yuanhui, Deng Tianlong. Progresses on the process and technique of lithium recovery from salt lake brines around the world[J]. World Sci-Tech R & D, 2006,28(5):69−75. (刘元会, 邓天龙. 国内外从盐湖卤水中提锂工艺技术研究进展[J]. 世界科技研究与发展, 2006,28(5):69−75. doi: 10.3969/j.issn.1006-6055.2006.05.010
[7]	Lemaire J, Svecova L, Lagallarde E, et al. Lithium recovery from aqueous solution by sorption/desorption[J]. Hydrometallurgy, 2014,143:1−11. doi: 10.1016/j.hydromet.2013.11.006
[8]	Wu X, Wen Z, Lin B, et al. Sol-gel synthesis and sintering of nano-size Li₂TiO₃ powder[J]. Materials Letters, 2008,62(6−7):837−839. doi: 10.1016/j.matlet.2007.06.073
[9]	Chitrakar R, Makita Y, Ooi K, et al. Synthesis of iron-doped manganese oxides with an ion-sieve property: lithium adsorption from bolivian brine[J]. Industrial & Engineering Chemistry Research, 2014,53(9):3682−3688.
[10]	Sun S Y, Cai L J, Nie X Y, et al. Separation of magnesium and lithium from brine using a desal nanofiltration membrane[J]. Journal of Water Process Engineering, 2015,7:210−217. doi: 10.1016/j.jwpe.2015.06.012
[11]	Song J, Li X M, Zhang Y, et al. Hydrophilic nanoporous ion-exchange membranes as a stabilizing barrier for liquid-liquid membrane extraction of lithium ions[J]. Journal of Membrane Science, 2014,471:372−380. doi: 10.1016/j.memsci.2014.08.010
[12]	Ji Z Y, Chen Q B, Yuan J S, et al. Preliminary study on recovering lithium from high Mg²⁺/Li⁺ ratio brines by electrodialysis[J]. Separation and Purification Technology, 2017,172:168−177. doi: 10.1016/j.seppur.2016.08.006
[13]	Wang L, Meng C G, Ma W. Study on Li⁺ uptake by lithium ion-sieve via the pH techniqu[J]. Colloids & Surfaces A-Physicochemical & Engineering Aspects, 2009,334(1−3):34−39.
[14]	Zhang Q H, Li S, Sun S Y, et al. Lithium selective adsorption on 1-D MnO nanostructure ion-sieve[J]. Advanced Powder Technology, 2009,20(5):432−437. doi: 10.1016/j.apt.2009.02.008
[15]	Bai C, Guo M, Zhang H F, et al. The research progress of extracting lithium from brine by lithium ion sieve[J]. Chemical Industry and Engineering Progress, 2017,36(3):802−809.
[16]	Shi Xichang, Yu Liangliang, Chen Baizhen, et al. Preparation and adsorption property of spinel-type lithium ion-sieve[J]. Journal of Central South University (Science and Technology), 2011,42(8):2198−2203. (石西昌, 余亮良, 陈白珍, 等. 尖晶石型锂离子筛的制备及其吸附性能[J]. 中南大学学报(自然科学版), 2011,42(8):2198−2203.
[17]	Chitrakar R, Kanoh H, Miyai Y, et al. Recovery of lithium from seawater using manganese oxide adsorbent (H_1.6Mn_1.6O₄) derived from Li_1.6Mn_1.6O₄[J]. Industrial & Engineering Chemistry Research, 2001,40(9):2054−2058.
[18]	Zhang L Y, Zhou D L, He G, et al. Synthesis of H₂TiO₃-lithium adsorbent loaded on ceramic foams[J]. Materials Letters, 2015,145:351−354. doi: 10.1016/j.matlet.2015.01.142
[19]	Park K, Benayad A, Kang D, et al. Nitridation-driven conductive Li₄Ti₅O₁₂ for lithium ion batteries[J]. Journal of the American Chemical Society, 2008,130(45):14930−14931. doi: 10.1021/ja806104n
[20]	Xu X, Zhou Y, Fan M, et al. Lithium adsorption performance of a three-dimensional porous H₂TiO₃-type lithium ion-sieve in strong alkaline Bayer liquor[J]. RSC Advances, 2017,7:18883−18891. doi: 10.1039/C7RA01056G
[21]	Nugroho A, Kim S J, Chung K Y, et al. Facile synthesis of nanosized Li₄Ti₅O₁₂ in supercritical water[J]. Electrochemistry Communications, 2011,13(6):650−653. doi: 10.1016/j.elecom.2011.03.037
[22]	Onodera Y, Iwasaki T, Hayashi H, et al. A new inorganic material with high selective adsorbability for Li⁺[J]. Journal of the Ceramic Society of Japan, 1989,97(1129):888−894. doi: 10.2109/jcersj.97.888
[23]	Zhang L F, Chen B Z, Shi X C, et al. Synthesis and adsorption property of H₂TiO₃ type adsorbent[J]. The Chinese Journal of Nonferrous Metals, 2010,20(9):1850−1854.
[24]	Chung W J, Torrejos R E C, Park M J, et al. Continuous lithium mining from aqueous resources by an adsorbent filter with a 3D polymeric nanofiber network infused with ion sieves[J]. Chemical Engineering Journal, 2017,309:49−62. doi: 10.1016/j.cej.2016.09.133
[25]	Deng D H, Wu H, Liao X P, et al. Synthesis of unique mesoporous ZrO₂-carbon fiber from collagen fiber[J]. Microporous and Mesoporous Materials, 2008,116(1−3):705−709. doi: 10.1016/j.micromeso.2008.05.018
[26]	Cai Li. Synthesis and photo-catalytic activity of mesoporous TiO₂fiber using collagen fiber as a template[J]. Journal of Functional Materials, 2013,44(23):3447−3451. (蔡莉. 胶原纤维为模板制备介孔TiO₂纤维及光催化活性研究[J]. 功能材料, 2013,44(23):3447−3451. doi: 10.3969/j.issn.1001-9731.2013.23.020
[27]	Zhang Liyuan, You Yaohui, You Jia, et al. Preparation and photocatalytic performance of fibrous Gd-doped TiO₂ using collagen fiber as template[J]. Journal of Synthetic Crystals, 2019,48(2):312−320. (张理元, 由耀辉, 尤佳, 等. 胶原纤维为模板制备Gd掺杂纤维状二氧化钛及光催化性能研究[J]. 人工晶体学报, 2019,48(2):312−320. doi: 10.3969/j.issn.1000-985X.2019.02.024
[28]	Zhang Bin, Chen Tijun, Wang Lingyun, et al. Study on ultrasonic dispersion of graphene nanoplatelets[J]. Journal of Functional Materials, 2019,50(8):8133−8139. (张斌, 陈体军, 王凌云, 等. 石墨烯纳米片超声分散的研究[J]. 功能材料, 2019,50(8):8133−8139. doi: 10.3969/j.issn.1001-9731.2019.08.019
[29]	Schofield P, Mbugua D M, Pell A N. Analysis of condensed tannins: a review[J]. Animal Feed Science and Technology, 2001,91(1−2):21−40. doi: 10.1016/S0377-8401(01)00228-0
[30]	Shi B, He X Q, Haslam E. Pofyphenol-Gelatin interaction[J]. Journal of American Leather Chemists Association, 1994,89(4):98−104.
[31]	Tao Yuhu. Preparation and properties of triethanolamine modified basalt fiber/natural rubber composites[J]. Science & Technology Vision, 2018,(10):256−258. (陶玉虎. 三乙醇胺改性玄武岩纤维/天然橡胶复合材料的制备及性能研究[J]. 科技视界, 2018,(10):256−258.