Citation: | Chen Lifei, Luo Yunrong, Fu Lei, Li Xiulan, Zhang Yingqian, Li Hui. Research progress of notched specimen fatigue[J]. IRON STEEL VANADIUM TITANIUM, 2021, 42(5): 197-204. doi: 10.7513/j.issn.1004-7638.2021.05.031 |
[1] |
Luo Yunrong, Wang Qingyuan, Fu Lei, et al. Effect of seismic frequency on ultra-low cycle fatigue behavior of Q235 steel structure materials[J]. Experimental Mechanics, 2018,33(5):743−750. (罗云蓉, 王清远, 付磊, 等. 地震频率对Q235钢结构材料超低周疲劳行为的影响[J]. 实验力学, 2018,33(5):743−750.
|
[2] |
Huang Ning, Li Suyun. Fatigue behavior of notched parts[J]. Journal of Nanchang University (Engineering & Technology Edition), 2018,40(2):174−178. (黄宁, 李素云. 缺口件的疲劳行为[J]. 南昌大学学报(工科版), 2018,40(2):174−178.
|
[3] |
Zheng Ziming. Analysis of failure of steel plate parts caused by stress concentration[J]. Automotive Technology and Materials, 2017,(10):32−35. (郑子明. 应力集中导致钢板零件失效的问题分析[J]. 汽车工艺与材料, 2017,(10):32−35. doi: 10.3969/j.issn.1003-8817.2017.10.007
|
[4] |
Chaves V, Navarro A. Fatigue limits for notches of arbitrary profile[J]. International Journal of Fatigue, 2013,48:68−79. doi: 10.1016/j.ijfatigue.2012.10.004
|
[5] |
Gladskyi M, Fatemi A. Notched fatigue behavior including load sequence effects under axial and torsional loadings[J]. International Journal of Fatigue, 2013,55:43−53. doi: 10.1016/j.ijfatigue.2013.05.003
|
[6] |
Singh, Mn K. Notch tip stress strain analysis in bodies subjected to non-proportional cyclic loads microform[D].Canada Waterloo:University of Waterloo , 1998.
|
[7] |
Li Zheng, Xiong Changhong, Xu Jiandong, et al. Analysis of notch fatigue strength of aluminum alloy wire used for cable in wet environment[J]. Casting Technology, 2015,36(8):1950−1952. (李征, 熊长虹, 许建东, 等. 电缆用铝合金导线在潮湿环境下的缺口疲劳强度分析[J]. 铸造技术, 2015,36(8):1950−1952.
|
[8] |
冯先锋, 叶序斌, 叶笃毅, 等. 潮湿空气环境下2024-T351铝合金的缺口疲劳强度[J]. 材料科学与工程学报, 2014, 32(3): 417-420.
Feng Xianfeng, Ye Xubin, Ye Duyi, et al. Notch fatigue strength of aluminum alloy 2024-T351 in humid air [J]. Journal of Materials Science and Engineering, 2014, 32(3): 417-420.
|
[9] |
Wu Ximao, Xie Guangzong, Zhang Guangping. Microstructure and notched fatigue strength of X20CrMoV12-1 steel[J]. Journal of Materials Research, 2008,(2):220−224. (吴细毛, 谢光宗, 张广平. X20CrMoV12-1钢的组织结构和缺口疲劳强度[J]. 材料研究学报, 2008,(2):220−224. doi: 10.3321/j.issn:1005-3093.2008.02.022
|
[10] |
Hu Lin, Gao Zhikun. Study on the genesis of crack and equiaxial crystal in rotor blade of DD6 single crystal alloy turbine[J]. Aeroengine, 2018,44(6):91−96. (胡霖, 高志坤. DD6单晶合金涡轮转子叶片裂纹与内腔等轴晶成因研究[J]. 航空发动机, 2018,44(6):91−96.
|
[11] |
Shi Zhenxue, Li Jiarong, Han Mei, et al. Notched fatigue properties of DD6 single crystal superalloy[J]. Journal of Iron and Steel Research, 2011,23(S2):345−348. (史振学, 李嘉荣, 韩梅, 等. DD6单晶高温合金的缺口疲劳性能[J]. 钢铁研究学报, 2011,23(S2):345−348.
|
[12] |
Yang K, Zhong B, Huang Q, et al. Stress ratio effect on notched fatigue behavior of a Ti-8Al-1Mo-1V alloy in the very high cycle fatigue regime[J]. International Journal of Fatigue, 2018,116:80−89. doi: 10.1016/j.ijfatigue.2018.05.032
|
[13] |
Htoo A T, Miyashita Y, Otsuka Y, et al. Variation of local stress ratio and its effect on notch fatigue behavior of 2024-T4 aluminum alloy[J]. International Journal of Fatigue, 2016,88:19−28. doi: 10.1016/j.ijfatigue.2016.03.001
|
[14] |
Blasón S, Rodríguez C, Belzunce J, et al. Fatigue behaviour improvement on notched specimens of two different steels through deep rolling, a surface cold treatment[J]. Theoretical and Applied Fracture Mechanics, 2017,92:223−228. doi: 10.1016/j.tafmec.2017.08.003
|
[15] |
Xi Wei. Sensitivity analysis of fatigue life distribution of notched parts[J]. Science, Technology and Engineering, 2015,15(14):97−101. (奚蔚. 缺口件疲劳寿命分布的敏度分析[J]. 科学技术与工程, 2015,15(14):97−101. doi: 10.3969/j.issn.1671-1815.2015.14.018
|
[16] |
Berto F, Razavi S M J, Ayatollahi M R. Fatigue behaviour of notched specimens made of 40CrMoV13.9 under multiaxial loading[J]. Procedia Structural Integrity, 2017,3:85−92. doi: 10.1016/j.prostr.2017.04.012
|
[17] |
Nicoletto G. Directional and notch effects on the fatigue behavior of as-built DMLS Ti6Al4V[J]. International Journal of Fatigue, 2018,106:124−131. doi: 10.1016/j.ijfatigue.2017.10.004
|
[18] |
Huang Wei, Chen Wei, Pan Hui, et al. Effect of external damage on high cycle fatigue strength of titanium alloy TC4[J]. Mechanical Strength, 2014,36(3):357−362. (黄伟, 陈伟, 潘辉, 等. 外物损伤对钛合金TC4高周疲劳强度的影响研究[J]. 机械强度, 2014,36(3):357−362.
|
[19] |
Mo Lihua, Gao Jie, Li Fengqi. Study on artificial notch fatigue test of high strength cylinder[J]. Pressure Vessel, 2005,(9):13−15,12. (莫立华, 高杰, 李凤岐. 高强度钢瓶人工缺口疲劳试验的研究[J]. 压力容器, 2005,(9):13−15,12. doi: 10.3969/j.issn.1001-4837.2005.09.004
|
[20] |
Zhang Qingling, Ju Xuening, Wang Qingru, et al. Fatigue fracture behavior of Ti-15-3 titanium alloy[J]. Materials Engineering, 1998,(3):25−28. (张庆玲, 居学宁, 王庆如, 等. Ti-15-3钛合金的疲劳断裂行为研究[J]. 材料工程, 1998,(3):25−28.
|
[21] |
Łagoda T, Biłous P, Blacha Ł. Investigation on the effect of geometric and structural notch on the fatigue notch factor in steel welded joints[J]. International Journal of Fatigue, 2017,101:224−231. doi: 10.1016/j.ijfatigue.2016.09.006
|
[22] |
Liu Xiaoyan, He Xiaomei, Dong Jie. Fatigue crack initiation and propagation behavior of 2Cr13 steel[J]. Thermal Processing Technology, 2012,41(2):49−51,54. (刘晓燕, 何晓梅, 董洁. 2Cr13钢的疲劳裂纹萌生与扩展行为[J]. 热加工工艺, 2012,41(2):49−51,54. doi: 10.3969/j.issn.1001-3814.2012.02.014
|
[23] |
Shan Zhaohui, Wang Zhongguang, Zhang Yun, et al. Study on short fatigue crack behavior of Al-Li alloy[J]. Journal of Materials Research, 1994,(6):524−526. (单朝晖, 王中光, 张匀, 等. Al-Li合金缺口疲劳短裂纹行为的研究[J]. 材料研究学报, 1994,(6):524−526.
|
[24] |
Owolabi G, Okeyoyin O, Bamiduro O, et al. The effects of notch size and material microstructure on the notch sensitivity factor for notched components[J]. Engineering Fracture Mechanics, 2015,145:181−196. doi: 10.1016/j.engfracmech.2015.03.026
|
[25] |
Zhang Chengcheng, Yao Weixing. Method for fatigue life analysis of typical notched parts[J]. Journal of Aeronautical Dynamics, 2013,28(6):1223−1230. (张成成, 姚卫星. 典型缺口件疲劳寿命分析方法[J]. 航空动力学报, 2013,28(6):1223−1230.
|
[26] |
Adib H, Pluvinage G. Theoretical and numerical aspects of the volumetric approach for fatigue life prediction in notched components[J]. International Journal of Fatigue, 2003,25(1):67−76. doi: 10.1016/S0142-1123(02)00040-3
|
[27] |
Xi Wei, Yao Weixing. Effective stress method for predicting the fatigue life distribution of notched parts[J]. Chinese Journal of Solid Mechanics, 2013,34(2):205−212. (奚蔚, 姚卫星. 缺口件疲劳寿命分布预测的有效应力法[J]. 固体力学学报, 2013,34(2):205−212. doi: 10.3969/j.issn.0254-7805.2013.02.014
|
[28] |
Xi Wei, Yao Weixing. A method for predicting the fatigue life of notched parts considering the size effect[J]. Journal of Nanjing University of Aeronautics and Astronautics, 2013,45(4):497−502. (奚蔚, 姚卫星. 一种考虑尺寸效应的缺口件疲劳寿命预测方法[J]. 南京航空航天大学学报, 2013,45(4):497−502. doi: 10.3969/j.issn.1005-2615.2013.04.010
|
[29] |
Madia M, Zerbst U. Application of the cyclic R-curve method to notch fatigue analysis[J]. International Journal of Fatigue, 2016,82:71−79. doi: 10.1016/j.ijfatigue.2015.06.015
|
[30] |
Tanaka K, Akiniwa Y. Resistance-curve method for predicting propagation threshold of short fatigue cracks at notches[J]. Engineering Fracture Mechanics, 1988,30(6):863−876. doi: 10.1016/0013-7944(88)90146-4
|
[31] |
Tabernig B, Pippan R. Determination of the length dependence of the threshold for fatigue crack propagation[J]. Engineering Fracture Mechanics, 2002,69(8):899−907. doi: 10.1016/S0013-7944(01)00129-1
|
[32] |
Medekshas H, Balina V. Assessment of low cycle fatigue strength of notched components[J]. Materials & Design, 2006,27(2):132−140.
|
[33] |
Kwon K, Frangopol D M. Bridge fatigue reliability assessment using probability density functions of equivalent stress range based on field monitoring data[J]. International Journal of Fatigue, 2010,32(8):1221−1232. doi: 10.1016/j.ijfatigue.2010.01.002
|
[34] |
Ayyub B M, Assakkaf I A, Kihl D P, et al. Reliability-based design guidelines for fatigue of ship structures[J]. Naval Engineers Journal, 2010,114(2):113−138.
|
[35] |
Lim H J, Lee Y J, Sohn H. Continuous fatigue crack length estimation for aluminum 6061-T6 plates with a notch[J]. Mechanical Systems and Signal Processing, 2019,120:356−364. doi: 10.1016/j.ymssp.2018.10.018
|
[36] |
Sun J, Ding Z, Huang Q. Corrosion fatigue life prediction for steel bar in concrete based on fatigue crack propagation and equivalent initial flaw size[J]. Construction and Building Materials, 2019,195:208−217. doi: 10.1016/j.conbuildmat.2018.11.056
|
[37] |
Liu J, Zhang R, Wei Y, et al. A new method for estimating fatigue life of notched specimen[J]. Theoretical and Applied Fracture Mechanics, 2018,93:137−143. doi: 10.1016/j.tafmec.2017.07.017
|
[38] |
Hurley P J, Whittaker M T, Williams S J, et al. Prediction of fatigue initiation lives in notched Ti 6246 specimens[J]. International Journal of Fatigue, 2008,30(4):623−634. doi: 10.1016/j.ijfatigue.2007.05.013
|
[39] |
Htoo A T, Miyashita Y, Otsuka Y, et al. Notch fatigue behavior of Ti-6Al-4V alloy in transition region between low and high cycle fatigue[J]. International Journal of Fatigue, 2017,95:194−203. doi: 10.1016/j.ijfatigue.2016.10.024
|
[40] |
Jin Dan, Gou Zhifei. A new method for fatigue life prediction of notched parts[J]. Journal of Aeronautical Materials, 2017,37(2):81−87. (金丹, 缑之飞. 缺口件疲劳寿命预测新方法[J]. 航空材料学报, 2017,37(2):81−87.
|
[41] |
Bao Hongchen, Liu Guangyan. Numerical simulation of gap size and shape effect of fiber reinforced composite laminates[J]. Journal of Composite Materials, 2017,34(5):987−995. (鲍宏琛, 刘广彦. 纤维增强复合材料层合板缺口尺寸及形状效应数值模拟[J]. 复合材料学报, 2017,34(5):987−995.
|
[42] |
Dong Qin, Yang Ping, Yu Zhifeng. CTOD theory and numerical simulation of ship notched plate considering cumulative plastic failure under cyclic loading[J]. Ship Mechanics, 2018,22(7):865−872. (董琴, 杨平, 余志锋. 循环载荷下考虑累积塑性破坏的船体缺口板CTOD理论及数值模拟研究[J]. 船舶力学, 2018,22(7):865−872. doi: 10.3969/j.issn.1007-7294.2018.07.010
|
[43] |
Alshahbouni T, Güngör A. Designing and modeling U-notch fatigue sensor to predict the fatigue life of structural components[J]. Engineering Science and Technology, an International Journal, 2019,22(2):405−415. doi: 10.1016/j.jestch.2018.09.011
|
[44] |
Zhang Dingquan. Effect of residual stress on fatigue strength of metal[J]. Physical and Chemical Examination (Physical Volume), 2002,(6):231−235. (张定铨. 残余应力对金属疲劳强度的影响[J]. 理化检验(物理分册), 2002,(6):231−235.
|
[45] |
Zhang D, Xu K, He J. Aspects of the residual stress field at a notch and its effect on fatigue[J]. Materials Science & Engineering A, 1991,91(136):79−83.
|
[46] |
Xu Kewei, Zhang Hui, Hu Naisai. The effect of a pre overload on the notch fatigue strength of aluminum alloy before and after shot peening[J]. Journal of Aeronautics, 1993,(6):317−320. (徐可为, 张晖, 胡奈赛. 一次预过载对铝合金喷丸前后缺口疲劳强度的影响[J]. 航空学报, 1993,(6):317−320. doi: 10.3321/j.issn:1000-6893.1993.06.020
|
[47] |
Wang Xin, Wang Kechang, Luo Xuekun, et al. Effect of powder alloy FGH95 shot peening on high temperature notch fatigue property[J]. Aviation Manufacturing Technology, 2018,61(z2):40−45. (王欣, 王科昌, 罗学昆, 等. 粉末合金FGH95喷丸强化对高温缺口疲劳性能的影响[J]. 航空制造技术, 2018,61(z2):40−45.
|
[48] |
Li Li, Zhu Youli, Lv Guangyi, et al. Study on ultrasonic deep roll surface strengthening technology of TC4 titanium alloy[J]. Materials Engineering, 2008,(11):68−70,74. (李礼, 朱有利, 吕光义, 等. TC4钛合金超声深滚表面强化技术的研究[J]. 材料工程, 2008,(11):68−70,74. doi: 10.3969/j.issn.1001-4381.2008.11.016
|
[49] |
Zhu Youli, Bian Feilong, Wang Yanli, et al. Ultrasonic deep roll anti-fatigue strengthening treatment of surface small notch damage[J]. Journal of Armored Force Engineering College, 2014,28(5):82−86. (朱有利, 边飞龙, 王燕礼, 等. 表面小缺口损伤的超声深滚抗疲劳强化处理[J]. 装甲兵工程学院学报, 2014,28(5):82−86.
|
[50] |
Feng Zhongxin. Study on the influence of surface rolling on the notch fatigue strength of carburized steel[J]. Journal of Xi'an Jiaotong University, 1995,(8):90−94. (冯忠信. 表面滚压对渗碳钢缺口疲劳强度影响的研究[J]. 西安交通大学学报, 1995,(8):90−94.
|