Development of gas element diffusion wear-resistant treatment technology on titanium surface

Li Zhengxian; Zhang Xuefeng; Chen Min; Li Wei; Luo Xiaofeng

doi:10.7513/j.issn.1004-7638.2021.06.003

Volume 42 Issue 6

Dec. 2021

Turn off MathJax

Article Contents

Article Navigation > IRON STEEL VANADIUM TITANIUM > 2021 > 42(6): 28-35

Li Zhengxian, Zhang Xuefeng, Chen Min, Li Wei, Luo Xiaofeng. Development of gas element diffusion wear-resistant treatment technology on titanium surface[J]. IRON STEEL VANADIUM TITANIUM, 2021, 42(6): 28-35. doi: 10.7513/j.issn.1004-7638.2021.06.003

Citation:

Li Zhengxian, Zhang Xuefeng, Chen Min, Li Wei, Luo Xiaofeng. Development of gas element diffusion wear-resistant treatment technology on titanium surface[J]. IRON STEEL VANADIUM TITANIUM, 2021, 42(6): 28-35. doi: 10.7513/j.issn.1004-7638.2021.06.003

Citation:

PDF( 1267 KB)

Development of gas element diffusion wear-resistant treatment technology on titanium surface

doi: 10.7513/j.issn.1004-7638.2021.06.003

1.
Northwest Institute for Non-ferrous Metal Research, Xi’an710016, Shaanxi, China
2.
Panzhihua University, Panzhihua 617000, Sichuan, China
3.
Sichuan University of Science and Engineering, Zigong 643002, Sichuan, China
4.
Chengdu Advanced Metal Materials Industry Technology Research Institute Co., Ltd., Chengdu 610300, Sichuan, China

Received Date: 2021-12-03
Publish Date: 2021-12-31

Abstract

Abstract

In this paper, the resent research progress of gas element diffusion wear treatment technology on surface of titanium and titanium alloy is summarized.It is believed that treatment technology of oxidizing, nitriding and carburizing on the surface of titanium alloy, can improve its surface hardness and wear resistance .In addition, the combination of vacuum and plasma technologies can increase the thickness of the diffusion layer, but appropriate parameters need to be selected in combination with the process, otherwise it will have a greater impact on the mechanical properties of the material.Furthermore, because the wear-resistant environment is diverse, the wear-resistant layer is difficult to adapt to all friction environments. Modern development has made the service environment of materials more complex . It requires not only wear resistance, but also corrosion resistance, electrical conductivity and other functional requirements. In this way, the material surface designer is required to design and innovate on the basis of the existing surface technology based on the harsh conditions of service and the interaction of multiple fields.
- titanium alloy,
- wear-resistant treatment of gas diffusion,
- oxygenation,
- nitriding,
- carburizing,
- surface hardness

FullText(HTML)

References(20)

References

[1]	周廉, 赵永庆, 王向东, 等. 中国钛合金材料及应用发展战略研究[M]. 北京: 化学工业出版社, 2012: 156. Zhou Lian, Zhao Yongqing, Wang Xiangdong, et al. Research on titanium alloy materials and application development strategy in China[M]. Bejing: Chemical Industry Press, 2012: 156.
[2]	Li Zhengxian, Du Jihong, Zhou Hui, et al. Double-glow discharged plasma non-hydrogen carburizing on titanium alloy surface[J]. Rare Metal Materials and Engineering, 2004,33(12):1355−1357. (李争显, 杜继红, 周慧, 等. 钛合金表面辉光无氢渗碳的研究[J]. 稀有金属材料与工程, 2004,33(12):1355−1357. doi: 10.3321/j.issn:1002-185X.2004.12.030
[3]	辛湘杰, 薛峻峰. 钛的腐蚀、防护及工程应用[M]. 合肥: 安徽科学技术出版社, 1988: 358. Xin Xiangjie, Xue Junfeng. Corrosion, protection and engineering application of titanium[M]. Hefei: Anhui Science and Technology Press, 1988: 358.
[4]	Yan Wei, Wang Xiaoxiang. Characterization of the surface oxygen-diffusion zone of the thermally oxidized titanium[J]. Rare Metal Materials and Engineering, 2005,34(3):471−473. (严伟, 王小祥. 热氧化处理钛表面渗氧层的组织与性能研究[J]. 稀有金属材料与工程, 2005,34(3):471−473. doi: 10.3321/j.issn:1002-185X.2005.03.034
[5]	Yang Chuang, Liu Jing, Ma Yaqin, et al. Vacuum oxidation treatment on Ti6Al4V titanium alloy[J]. Surface Technology, 2017,46(5):165−170. (杨闯, 刘静, 马亚琴, 等. Ti6Al4V钛合金表面真空渗氧处理[J]. 表面技术, 2017,46(5):165−170.
[6]	Zheng Chuanlin, Xu Zhong, et al. Study on plasma oxygenation of titanium[J]. Journal of Beijing University of science and technology, 2002,24(1):44−46. (郑传林, 徐重, 谢锡善, 等. 钛等离子渗氧研究[J]. 北京科技大学学报, 2002,24(1):44−46. doi: 10.3321/j.issn:1001-053X.2002.01.013
[7]	Chen Changjun, Ma Hongyan, Zhang Min, et al. Research progress of surface oxygen diffusion hardening of titanium alloy[J]. Hot Working Technology, 2007,36(14):63−65. (陈长军, 马红岩, 张敏, 等. 钛合金的表面渗氧强化研究进展[J]. 热加工工艺, 2007,36(14):63−65. doi: 10.3969/j.issn.1001-3814.2007.14.022
[8]	Qin Jianfeng, Wang Xinbo, Zou Jiaojuan, et al. Research progress of thermal oxidation effect on improving surface properties of titanium and titanium alloy[J]. Surface Technology, 2017,46(1):1−7. (秦建峰, 王馨舶, 邹娇娟, 等. 热氧化提高钛及钛合金表面性能的研究进展[J]. 表面技术, 2017,46(1):1−7.
[9]	贾翃, 夏志华. 钛表面气体氮化的工艺研究[J]. 稀有金属 , 1998, 22(4): 295-299. Jia Hong, Xia Zhihua. Study on processing of titanium surface nitrogenization[J].Chinese Journal of Rare Metals, 1998, 22(4): 295-299.
[10]	柴田英明. 朝原力など. 室化处理チタン材料[J]. 工業材料(日), 1993,41(15):114−118.
[11]	贾翃. 钛合金等离子渗氮层研究[C]//钛合金文集. 上海: 科学技术出版社, 1980: 217. Jia Hong. The study of plasma nitriding layer of titanium alloy[C]//Titanium Alloy Proceedings. Shanghai: Scientific & Technical Publishers, 1980: 217.
[12]	Li Zhengxian, Du Jihong, Zhou Hui, et al. Double-glow plasma surface carbon implantation of non-hydrogen on titanium[J]. Rare Metal Materials and Engineering, 2004,33(11):1174−1177. (李争显, 杜继红, 周慧, 等. 钛表面辉光等离子无氢渗碳的研究[J]. 稀有金属材料与工程, 2004,33(11):1174−1177. doi: 10.3321/j.issn:1002-185X.2004.11.013
[13]	Li Zhengxian, Du Jihong, Zhou Hui, et al. Development status of titanium surface treatment technology[J]. Titanium Industry Progress, 2003,22(4):41−45. (李争显, 杜继红, 周慧, 等. 钛表面处理技术的发展现状[J]. 钛工业进展, 2003,22(4):41−45. doi: 10.3969/j.issn.1009-9964.2003.04.010
[14]	徐重. 等离子表面冶金学[M], 北京: 科学出版社, 2008: 152. Xu Zhong. Plasma surface metallurgy[M]. Beijing: Science Press, 2008: 152.
[15]	Li Zhengxian, Ji Shouchang, Wang Yanfeng, et al. Surface treatment and application on titanium alloy wheel gear[J]. Titanium Industry Progress, 2018,35(6):6−9. (李争显, 姬寿长, 王彦峰, 等. 钛合金齿轮的表面处理与应用[J]. 钛工业进展, 2018,35(6):6−9.
[16]	姬寿长. 钛合金表面辉光等离子无氢渗碳层性能研究[D]. 西安: 西安建筑科技大学, 2014. Ji Shouchang. Research on properties of the nonhydrogen carburizing coating on titanium alloy by aglow plasma method[D]. Xi^,an: Xi’an University of Architecture and Technology, 2014.
[17]	岡本善四郎, 後藤浩ニなど. チタンおよびチタン合金のプラズマ浸炭[C]//兵庫県立工業技術センター研究報告. 1998: 25.
[18]	阿九津幸一 . プラズマ浸炭によるチタンの硬化処理[J].チタン , 2000, 48(2): 44-46.
[19]	野田俊治, 岡部道生など. プラズマ浸炭によるTiAl金属間化合物の表面硬化処理[J]. 電気製鋼, 1994,65(4):304−306.
[20]	藤原洋ニ, 岡本善四郎など. 低濃度メタンガスによりプラズマ浸炭したチタン合金の摩耗特性[C]//日本熱処理技術協会請演大会請演概要集. 1995: 29.