Effect of high temperature and high strain rate on the dynamic mechanical properties of 06Cr19Ni10 austenitic stainless steel

Zhang Jilin; Jia Haishen; Yi Xiangbin; Dou Jianming; Tang Linhu; Qin Juanjuan; Xu Chuangwen

doi:10.7513/j.issn.1004-7638.2022.01.022

Volume 43 Issue 1

Mar. 2022

Turn off MathJax

Article Contents

Article Navigation > IRON STEEL VANADIUM TITANIUM > 2022 > 43(1): 145-151

Zhang Jilin, Jia Haishen, Yi Xiangbin, Dou Jianming, Tang Linhu, Qin Juanjuan, Xu Chuangwen. Effect of high temperature and high strain rate on the dynamic mechanical properties of 06Cr19Ni10 austenitic stainless steel[J]. IRON STEEL VANADIUM TITANIUM, 2022, 43(1): 145-151. doi: 10.7513/j.issn.1004-7638.2022.01.022

Citation:

Zhang Jilin, Jia Haishen, Yi Xiangbin, Dou Jianming, Tang Linhu, Qin Juanjuan, Xu Chuangwen. Effect of high temperature and high strain rate on the dynamic mechanical properties of 06Cr19Ni10 austenitic stainless steel[J]. IRON STEEL VANADIUM TITANIUM, 2022, 43(1): 145-151. doi: 10.7513/j.issn.1004-7638.2022.01.022

Citation:

Zhang Jilin, Jia Haishen, Yi Xiangbin, Dou Jianming, Tang Linhu, Qin Juanjuan, Xu Chuangwen. Effect of high temperature and high strain rate on the dynamic mechanical properties of 06Cr19Ni10 austenitic stainless steel[J]. IRON STEEL VANADIUM TITANIUM, 2022, 43(1): 145-151. doi: 10.7513/j.issn.1004-7638.2022.01.022

PDF( 1255 KB)

Effect of high temperature and high strain rate on the dynamic mechanical properties of 06Cr19Ni10 austenitic stainless steel

doi: 10.7513/j.issn.1004-7638.2022.01.022

1.
Gansu Province Precision Machining Technology and Equipment Engineering Research Center, Lanzhou Institute of Technology, Lanzhou 730050, Gansu, China
2.
Key Laboratory of Green Cutting Technology and Application in Gansu Province, Lanzhou Institute of Technology, Lanzhou 730050, Gansu, China

Received Date: 2021-06-06
Accepted Date: 2022-01-05

Available Online: 2022-04-24

Publish Date: 2022-02-28

Abstract

Abstract

The dynamic mechanical properties of austenitic stainless steel 06Cr19Ni10 were studied by a high temperature split-Hopkinson pressure bar (SHPB) at temperatures of 25–300 ℃ and strain rates of 1000–3000 s⁻¹. The austenitic stainless steel 06Cr19Ni10 shows strain rate strengthening effect in the range of 1000–3 000 s⁻¹, and temperature softening effect in the range of 25–300 ℃. A scanning electron microscope (SEM) was used to observe microstructure of deformed sample at strain rate of 3 000 s⁻¹. It is found that under high strain rate, the deformation zone density is high, and decreases as the deformation temperature increases.
- austenitic stainless steel,
- 06Cr19Ni10,
- high strain,
- temperature softening,
- dynamic mechanical properties

FullText(HTML)

References(26)

References

[1]	刘勇. 密封唇焊结构奥氏体不锈钢阀门焊接性能研究[D]. 大连: 大连理工大学, 2017. Liu Yong. Studies on welding properties for sealing lip welding structure austenitic stainless steel valve[D]. Dalian: Dalian University of Technology, 2017.
[2]	黄超. 316 L不锈钢力学性能研究[D]. 哈尔滨: 哈尔滨工程大学, 2016. Huang Chao. Analysis on the mechanical properties of 316 L stainless steel [D]. Harbin: Harbin Engineering University, 2016.
[3]	Mei Rong, Ren Zhijun, Chou Wei. Hot deformation behavior of 06Cr18Ni11Ti austenitic stainless steel[J]. Ordnance Material Science and Engineering, 2019,42(6):88−92. (梅荣, 任志俊, 仇伟. 06Cr18Ni11Ti奥氏体不锈钢热变形行为研究[J]. 兵器材料科学与工程, 2019,42(6):88−92.
[4]	戴哲峰. 316 L不锈钢在复杂介质环境中的应力腐蚀试验研究[D]. 杭州: 浙江工业大学, 2009. Dai Zhefeng. Stress corrosion test research on 316 L austenitic stainless steel in complex medium condition [D]. Hangzhou: Zhejiang University of Technology, 2009.
[5]	Dong Hanshan, Li Xiaoying. Surface engineering for joint prosthesis: State-of-the-art and future directions[J]. China Surface Engineering, 2008,21(5):1−14. (董汉山, 李小英. 人造关节材料表面工程的现状及前瞻[J]. 中国表面工程, 2008,21(5):1−14. doi: 10.3321/j.issn:1007-9289.2008.05.001
[6]	凌玲, 李星星, 王学林, 等. 0Cr18Ni9不锈钢本构模型及其对切削力预测影响分析[J]. 中国机械工程, 2012,23(18): 2243-2248. Ling Ling, Li Xingxing, Wang Xuelin, et al. Constitutive model of stainless steel 0Cr18Ni9 and its influence on cutting force prediction [J]. China Mechanical Engineering, 2012, 23(18): 2243-2248. )
[7]	Wang Yan, Wang Mingjia, Cai Dayong, et al. Effect of deformation parameters on microstructure evolution of medium carbon steel[J]. Transactions of Materials and Heat Treatment, 2005,26(4):65−68. (王艳, 王明家, 蔡大勇, 等. 高强度奥氏体不锈钢的热变形行为及其热加工图[J]. 材料热处理学报, 2005,26(4):65−68.
[8]	Wang Y L, Jia G Z, Zhang T, et al. Dynamic mechanical behaviors of high-nitrogen austenitic stainless steel under high temperature and its constitutive model[J]. Explosion and Shock Waves, 2018,38(4):835−840.
[9]	Zhang Jing, Jiang Chunxia, Qiao Bangwei. Deformation behavior and constitutive equation of 14Cr17Ni2 steel at high temperature[J]. Hot Working Technology, 2018,47(14):38−43. (张静, 蒋春霞, 乔帮威. 14Cr17Ni2 钢高温变形行为及本构方程的研究[J]. 热加工工艺, 2018,47(14):38−43.
[10]	Wu Liang, Hu Yiseng, Ji Xiang, et al. Dynamic mechanical behavior and constitutive model of FV520B martensitic precipitation-hardening steel[J]. Journal of Mechanical Strength, 2018,40(3):584−588. (吴亮, 胡毅森, 纪翔, 等. 马氏体沉淀硬化不锈钢 FV520B 动态力学性能及本构模型的研究[J]. 机械强度, 2018,40(3):584−588.
[11]	Zhang Hong, Suo Tao, Li Yulong. Mechanical behavior of a stainless steel material at elevated temperatures and high strain rates[J]. Journal of Aeronautical Materials, 2012,31(1):78−83. (张红, 索涛, 李玉龙. 不锈钢材料高温、高应变率下动态力学性能的试验研究[J]. 航空材料学报, 2012,31(1):78−83. doi: 10.3969/j.issn.1005-5053.2012.1.016
[12]	Xu Zejian, Li Yulong, Liu Mingshuang, et al. Dynamic mechanical properties of stainless steel 0Crl8Nil0Ti welded joint at elevated temperratures and high strain rates[J]. Acta Metallurgica Sinica, 2008,44(1):98−104. (许泽建, 李玉龙, 刘明爽, 等. 不锈钢0Crl8Ni10Ti焊接头高温、高应变率下的动态力学性能[J]. 金属学报, 2008,44(1):98−104. doi: 10.3321/j.issn:0412-1961.2008.01.019
[13]	Shang Bing, Sheng Jing, Wang Baozhen, et al. Dynamic mechanical behavior and constitutive model of stainless steel[J]. Explosion and Shock Waves, 2008,28(6):527−531. (尚兵, 盛精, 王宝珍, 等. 不锈钢材料的动态力学性能及本构模型[J]. 爆炸与冲击, 2008,28(6):527−531. doi: 10.3321/j.issn:1001-1455.2008.06.008
[14]	He Zhu, Zhao Shougeng, Yang Jialing, et al. Experimental investigation of the dynamic material property of stainless steel: 0Cr17Ni4Cu4Nb[J]. Journal of Materials Science and Engineering, 2007,25(3):418−421. (何著, 赵寿根, 杨嘉陵, 等. 0Cr17Ni4Cu4Nb不锈钢动态力学性能研究[J]. 材料科学与工程学报, 2007,25(3):418−421. doi: 10.3969/j.issn.1673-2812.2007.03.024
[15]	魏玉伟, 李宁, 文玉华, 等. 马氏体含量对1Cr17Ni1双相不锈钢动态和准静态力学性能的影响[J]. 金属热处理, 2012, 37(11): 6-10. Wei Yuwei, Li Ning, Wen Yuhua, et al. Effect of martensite content on dynamic and quasi-static mechanical properties of 1Cr17Ni1dual-phase stainless steel [J]. Heat Treatment of Metals, 2012, 37(11): 6-10.
[16]	Xu Z, Li Y. Dynamic behaviors of 0Cr18Ni10Ti stainless steel welded joints at elevated temperatures and high strain rates[J]. Mechanics of Materials, 2009,41(2):121−130. doi: 10.1016/j.mechmat.2008.10.005
[17]	Lee W S, Chen T H, Lin C F, et al. Dynamic mechanical response of biomedical 316 L stainless steel as function of strain rate and temperature[J]. Bioinorganic Chemistry and Applications, 2011,(12):1−13.
[18]	Xiong Z P, Ren X P, Bao W P, et al. Effect of high temperature and high strain rate on the dynamic mechanical properties of Fe-30Mn-3Si-4Al TWIP steel[J]. International Journal of Minerals, Metallurgy and Materials, 2009,20(9):835−841.
[19]	Li Guohe, Wang Minjie. Dynamic mechanical properties and constitutive relationship of hardened steel (45 HRC) under high temperature and high strain rate[J]. Explosion and Shock Waves, 2010,30(4):433−438. (李国和, 王敏杰. 淬硬45钢在高温高应变下的动态力学性能及本构关系[J]. 爆炸与冲击, 2010,30(4):433−438. doi: 10.11883/1001-1455(2010)04-0433-06
[20]	Bao Weiping, Ren Xueping, Zhang Yi. The characteristics of flow stress and dynamic constitutive model at high strain rates for pure iron[J]. Journal of Plasticity Engineering, 2009,16(5):125−129. (包卫平, 任学平, 张毅. 纯铁在高应变率下的流动应力特征及其动态塑性本构关系[J]. 塑性工程学报, 2009,16(5):125−129. doi: 10.3969/j.issn.1007-2012.2009.05.024
[21]	Yan Qiushi, Sun Bowen, Yang Lu. Study on dynamic mechanical behavior of structural stainless steel at elevated temperature and high strain rate[J]. Journal of Huazhong University of Science and Technology(Natural Science Edition), 2019,47(5):128−132. (闫秋实, 孙博文, 杨璐. 高温高应变率下建筑不锈钢动态力学性能研究[J]. 华中科技大学学报(自然科学版), 2019,47(5):128−132.
[22]	周惠久, 黄明志. 金属材料强度[M]. 北京: 科学出版社, 1989. Zhou Huijiu, Huang Mingzhi. Strength of metal materials[M]. Beijing: Science Press, 1989.
[23]	Mi Z L, Tang D, Dai Y J, et al. In-situ observation on the deformation behaviors of Fe-Mn-C TWIP steel[J]. International Journal of Minerals, Metallurgy and Materials, 2009, 16(6): 646-649.
[24]	Li D Z, Wei Y H, Liu C Y, et al. Effects of high strain rate on properties and microstructure evolution of TWIP steel subjected to impact loading[J]. Journal of Iron and Steel Research, International, 2010,17(6):67−73. doi: 10.1016/S1006-706X(10)60116-1
[25]	Xiong R G, Fu R Y, Su Y, et al. Tensile properties of TWIP steel at high strain rate[J]. Journal of Iron and Steel Research, International, 2009,16(1):81−86. doi: 10.1016/S1006-706X(09)60015-7
[26]	Xiong Z P, Rrn X P, Bao W P, et al. Dynamic mechanical properties of the Fe-30Mn-3Si-4Al TWIP steel after different heat treatments[J]. Materials Science & Engineering A, 2011,530(12):426−431.