Citation: | Cui Kaiyu, Li Zhengrong, Zhao Zhengzhi, Ye Xiaoyu, Wang Chuangwei, Zhang Kaihua, Hu Yunfeng, Xiong Xuegang. Investigation on the effects of V and Ti on continuous cooling transformation behaviour of weathering steel[J]. IRON STEEL VANADIUM TITANIUM, 2022, 43(3): 132-138. doi: 10.7513/j.issn.1004-7638.2022.03.021 |
[1] |
Hou Baorong, Li Xiaogang, Ma Xiumin, et al. The cost of corrosion in China[J]. NPJ Materials Degradation, 2017,1(1):4. doi: 10.1038/s41529-017-0005-2
|
[2] |
Liu Kun, Zhang Xudong, Tian Zhihong, et al. Application research of green eco-friendly weathering steel in the field of building structure[J]. Building Science, 2020,36(S2):458−462. (刘锟, 张旭东, 田志红, 等. 绿色环保耐候钢在建筑结构领域中的应用研究[J]. 建筑科学, 2020,36(S2):458−462.
Liu K, Zhang X D, Tian Z H, et al. Application research of green eco-friendly weathering steel in the field of building structure[J]. Building Science, 2020, 36(S2): 458-462 (in Chinese).
|
[3] |
Lin Pengfei, Yang Zhongmin, Chen Ying, et al. Rust layer of weathering steel and its stabilization treatment status[J]. Iron and Steel, 2021,56(3):58−65. (林鹏飞, 杨忠民, 陈颖, 等. 耐候钢锈层及其稳定化处理现状[J]. 钢铁, 2021,56(3):58−65.
Lin P F, Yang Z M, Chen Y, et al. Rust layer of weathering steel and its stabilization treatment status[J]. Iron and Steel, 2021, 56(3): 58-65 (in Chinese).
|
[4] |
Mishra S K, Ranganathan S, Das S K. Investigations on precipitation characteristics in a high strength low alloy (HSLA) steel[J]. Scripta Materialia, 1998,39(2):253−259. doi: 10.1016/S1359-6462(98)00138-9
|
[5] |
Cui Kaiyu. Technology practice of increasing impact energy of weathering steel Q550NQR1 at -40 ℃[J]. Special Steel, 2018,39(5):54−57. (崔凯禹. 提高QS50NQRl耐候钢-40 ℃冲击功的工艺实践[J]. 特殊钢, 2018,39(5):54−57. doi: 10.3969/j.issn.1003-8620.2018.05.014
Cui K Y. Technology practice of increasing impact energy of weathering steel Q550 NQR1 at -40℃[J]. Special Steel, 2018, 39(5): 54-57 (in Chinese). doi: 10.3969/j.issn.1003-8620.2018.05.014
|
[6] |
Wang Chuangwai. Development of high strength weathering steel Q450NQR1 containing vanadium[J]. Iron Steel Vanadium Titanium, 2018,39(3):129−133. (汪创伟. 含钒高强度耐候钢板Q450NQR1开发[J]. 钢铁钒钛, 2018,39(3):129−133. doi: 10.7513/j.issn.1004-7638.2018.03.024
Wang C W. Development of high strength weathering steel Q450 NQR1 containing vanadium[J]. Iron Steel Vanadium Titanium, 2018, 39(3): 129-133 (in Chinese). doi: 10.7513/j.issn.1004-7638.2018.03.024
|
[7] |
Zhou Cong, Zhang Chenyang, Li Yunxin, et al. Microstructure and properties of Ti microalloyed 700 MPa weathering steel of container[J]. Transactions of Materials and Heat Treatment, 2020,41(7):126−133. (周聪, 张晨洋, 李运鑫, 等. Ti微合金化700 MPa级集装箱用耐候钢的组织性能[J]. 材料热处理学报, 2020,41(7):126−133.
Zhou C, Zhang C Y, Li Y X, et al. Microstructure and properties of To microalloyed 700 MPa weathering steel of container[J]. Transactions of Materials and Heat Treatment, 2020, 41(7): 126-133 (in Chinese).
|
[8] |
Gan Xiaolong, Zhao Gang, Yang Gengwei, et al. Determination and analysis of CCT curve of Ti-V composite microalloyed high stength steel[J]. Hot Working Technology, 2019,48(2):100−103. (甘晓龙, 赵刚, 杨庚蔚, 等. Ti-V复合微合金化高强钢CCT曲线的测定与分析[J]. 热加工工艺, 2019,48(2):100−103.
Gan X L, Zhao G, Yang G W, et al. Determination and analysis of CCT curve of Ti-V composite microalloyed high stength steel[J]. Hot Working Technology, 2019, 48(02): 100-103 (in Chinese).
|
[9] |
Bao Junheng, Zhao Jie, Ning Baoqun, et al. Transformation behavior of austenite continuous cooling for Nb-V micro-alloyed low carbon steel[J]. Journal of Iron and Steel Research, 2013,25(8):28−31. (包俊成, 赵捷, 宁保群, 等. 低碳铌钒微合金化钢奥氏体连续冷却转变行为[J]. 钢铁研究学报, 2013,25(8):28−31.
Bao J C, Zhao J, Ning B Q, et al. Transformation behavior of austenite continuous cooling for Nb-V micro-alloyed low carbon steel[J]. Journal of Iron and Steel Research, 2013, 25(8): 28-31 (in Chinese).
|
[10] |
蔡珍. 钒微合金化高碳钢形变诱导珠光体相变研究[D]. 武汉: 武汉科技大学, 2019.
Cai Zhen. Research on deformation-induced pearlite transformation in vanadium-microalloyed high carbon steel[J]. Wuhan:Wuhan University of Science and Technology, 2019.
|
[11] |
Siwecki Tadeusz, Eliasson Johan, Lagneborg Rune, et al. Vanadium microalloyed bainitic hot strip steels[J]. ISIJ International, 2010,50(5):760−767. doi: 10.2355/isijinternational.50.760
|
[12] |
Wu Hongyan, Du Linxiu, Xue Wenying, et al. Effect of process parameters on continuous cooling transformation for V-Ti microalloyed steel[J]. Iron Steel Vanadium Titanium, 2006,27(1):6−11. (吴红艳, 杜林秀, 薛文颖, 等. 变形工艺对V、Ti微合金钢连续冷却相变的影响[J]. 钢铁钒钛, 2006,27(1):6−11. doi: 10.3969/j.issn.1004-7638.2006.01.002
Wu H Y, Du L X, Xue W Y, et al. Effect of process parameters on continuous cooling transformation for V-Ti microalloyed steel[J]. Iron Steel Vanadium Titanium, 2006, 27(1): 6-11 (in Chinese). doi: 10.3969/j.issn.1004-7638.2006.01.002
|
[13] |
Liu Meiling, Tang Hengqiang, Zhu Guohui. Continuous cooling transformation an thermal-mechanical simulation of Nb and Nb-Ti microalloy weathering steels[J]. Heat Treatment of Metals, 2019,44(7):138−143. (柳美玲, 汤亨强, 朱国辉. Nb和Nb-Ti系微合金耐候钢的连续冷却转变与形变热模拟[J]. 金属热处理, 2019,44(7):138−143.
Liu M L, Tang H Q, Zhu G H. Continuous cooling transformation an thermal-mechanical simulation of Nb and Nb-Ti microalloy weathering steels[J]. Heat Treatment of Metals, 2019, 44(7): 138-143 (in Chinese).
|