Citation: | Zhai Dongyu, Zhang Youyou, Lei Xiaorong, Liu Shuai, Chang Yunhe. Production process optimization of high-quality steel for engineering machinery[J]. IRON STEEL VANADIUM TITANIUM, 2023, 44(1): 167-174. doi: 10.7513/j.issn.1004-7638.2023.01.026 |
[1] |
Zheng Rui, Li Fei, Zhang Qian. Application status and development of high strength steel for engineering machine[J]. Metallurgical Information Review, 2021,41(1):147−148. (郑瑞, 李飞, 张谦. 高强度工程机械用钢应用现状和发展前景[J]. 冶金信息导刊, 2021,41(1):147−148.
|
[2] |
Li Qingchun. Study on fatigue behavior of Q690 steel for engineering machine[J]. Metallurgy and Materials, 2021,41(1):61−62. (李庆春. 一种工程机械用钢Q690疲劳性能研究[J]. 冶金与材料, 2021,41(1):61−62.
|
[3] |
Wei Chengzhi, Lv Xiaofeng, Ma Heng, et al. Study on production of high strength steel Q690 for engineering machine[J]. Shandong Metallurgy, 2019,41(2):11−15. (魏承志, 吕晓锋, 麻衡, 等. 工程机械用高强钢Q960生产工艺研究[J]. 山东冶金, 2019,41(2):11−15. doi: 10.16727/j.cnki.issn1004-4620.2019.02.005
|
[4] |
Zhang Yuanyu. Development on high strength steel Q690E for engineering machine[J]. Modern Metallurgy, 2020,48(1):4−6. (张媛钰. 高强度工程用Q960 E的工业开发[J]. 现代冶金, 2020,48(1):4−6.
|
[5] |
Sheng Baojun, Rao Jing, Yang Liqing, et al. Cause analysis and improvement of “black ash”on steel aurface for automobile conatruction machinery[J]. Henan Metallurgy, 2020,28(6):33−36. (申保军, 饶静, 杨立庆, 等. 汽车工程机械用钢表面”黑灰”原因分析与改进[J]. 河南冶金, 2020,28(6):33−36.
|
[6] |
Li Haibo. Discussion and practice on surface quality improvement of large size hot rolled girder steel[J]. China Metal Bulletin, 2019,(2):113−114. (李海波. 厚规格热轧大梁用钢表面质量改进探讨及实践[J]. 中国金属通报, 2019,(2):113−114. doi: 10.3969/j.issn.1672-1667.2019.02.071
|
[7] |
Huang Dawei, Chen Jiqing, Xu Jinqiao, et al. Research on surface defects control of special hot-rolled steel for engineering machinery[J]. Wisco Technology, 2016,54(5):32−35. (黄大伟, 陈吉清, 徐进桥, 等. 热轧工程机械专用钢表面缺陷的控制研究[J]. 武钢技术, 2016,54(5):32−35.
|
[8] |
Chen Gang, He Longyi, Han Guoming, et al. Research on pitted surface defect control of thin gange hot rolled pickling strip[J]. Metallurgical Equipment, 2021,(1):10−13,32. (陈刚, 何龙义, 韩国民, 等. 热轧酸洗钢表面麻坑缺陷控制研究[J]. 冶金设备, 2021,(1):10−13,32.
|
[9] |
Zhang Y, Zou D, Wang X, et al. Influences of Si content on the high-temperature oxidation behavior of X10CrAlSi18 ferritic heat-resistant stainless steel at 700 °C and 800 °C[J]. Surface and Coatings Technology, 2021,422:127523. doi: 10.1016/j.surfcoat.2021.127523
|
[10] |
Chen Y, Zhang X M, Cai Z H, et al. Effect of microalloying with V and Ti on the microstructure and properties of electron beam welded thick high-Mn TWIP steel plates[J]. Materials Science and Engineering A, 2021:141062.
|
[11] |
Shi Q, Yan W, Li Y, et al. Oxidation behavior of ferritic/martensitic steels in flowing supercritical water[J]. Journal of Materials Science and Technology, 2021,(64):114−125.
|
[12] |
Zhang Shengpan, Jiao Anjie, Dai Jiulin, et al. Effect of rolling process on iron oxide scale of high strength weathering resistant steel scale[J]. China Metallurgy, 2021,31(7):105−111. (张盛攀, 焦安杰, 代玖林, 等. 轧制工艺对高强耐候钢表面氧化铁皮的影响[J]. 中国冶金, 2021,31(7):105−111. doi: 10.13228/j.boyuan.issn1006-9356.20200634
|
[13] |
Cheng L, Sun B, Du C, et al. High-temperature oxidation behavior of Fe–10Cr steel under different atmospheres[J]. Materials, 2021,14:3453. doi: 10.3390/ma14133453
|