Review on technology developments of titanium-steel clad plates based on global patent analysis

Zhang Weina; Li Jun; Peng Lin; Wu You; Liang Guangfen

doi:10.7513/j.issn.1004-7638.2023.03.013

Volume 44 Issue 3

Jun. 2023

Turn off MathJax

Article Contents

Article Navigation > IRON STEEL VANADIUM TITANIUM > 2023 > 44(3): 84-92

Zhang Weina, Li Jun, Peng Lin, Wu You, Liang Guangfen. Review on technology developments of titanium-steel clad plates based on global patent analysis[J]. IRON STEEL VANADIUM TITANIUM, 2023, 44(3): 84-92. doi: 10.7513/j.issn.1004-7638.2023.03.013

Citation:

Zhang Weina, Li Jun, Peng Lin, Wu You, Liang Guangfen. Review on technology developments of titanium-steel clad plates based on global patent analysis[J]. IRON STEEL VANADIUM TITANIUM, 2023, 44(3): 84-92. doi: 10.7513/j.issn.1004-7638.2023.03.013

Citation:

PDF( 942 KB)

Review on technology developments of titanium-steel clad plates based on global patent analysis

doi: 10.7513/j.issn.1004-7638.2023.03.013

State Key Laboratory of Vanadium and Titanium Resources Comprehensive Utilization, Pangang Group Research Institute Co., Ltd., Panzhihua 617000, Sichuan, China

Received Date: 2022-11-25
Publish Date: 2023-06-30

Abstract

Abstract

The development of key technologies of titanium-steel clad plates is reviewed based on a comprehensive mining of global patent applications. The results show that China and Japan are the major technology sources of titanium-steel clad plates. While Japan started earlier, China later rank first in patent applications in the world. Titanium-steel clad plate processing technologies are research hot spots, among which the direct rolling process route holds the largest share in a patent portfolio. The aims of the patented technologies is primarily to reduce the cost and improve the bonding strength. Based on the above findings, some suggestions about technological innovation and product development are proposed from a patent strategic perspective.
- titanium-steel clad plates,
- patent analysis

FullText(HTML)

References(14)

References

[1]	Chen Xingzhang. Review of laminar composite metal material manufacturing technique[J]. Nonferrous Metal Materials and Engineering, 2017,38(2):63−66. (陈兴章. 层状金属复合材料技术创新及发展趋势综述[J]. 有色金属材料与工程, 2017,38(2):63−66. Chen Xingzhang. Review of laminar composite metal material manufacturing technique[J]. Nonferrous Metal Materials and Engineering, 2017, 38(2): 63-66.
[2]	Bai Yuliang, Liu Xuefeng, Wang Wenjing, et al. Current status and research trends in processing and application of titanium/steel composite plate[J]. Chinese Journal of Engineering, 2021,43(1):85−96. (白于良, 刘雪峰, 王文静, 等. 钛/钢复合板及其制备应用研究现状与发展趋势[J]. 工程科学学报, 2021,43(1):85−96. Bai Yuliang, Liu Xuefeng, Wang Wenjing, et al.Current status and research trends in processing and application of titanium/steel composite plate[J]. Chinese Journal of Engineering, 2021, 43(1): 85-96.
[3]	Li Junhan, Sun Ning, Ma Lan, et al. Progress in preparation technology and application of titanium-steel composite sheets[J]. World Nonferrous Metals, 2020,(14):34−36. (李俊翰, 孙宁, 马兰, 等. 钛钢复合板的制备技术进展及应用[J]. 世界有色金属, 2020,(14):34−36. doi: 10.3969/j.issn.1002-5065.2020.14.015 Li Junhan, Sun Ning, Ma Lan, et al. Progress in preparation technology and application of titanium-steel composite sheets[J]. World Nonferrous Metals, 2020(14): 34-36. doi: 10.3969/j.issn.1002-5065.2020.14.015
[4]	Yang Wenyue, Sun Qian, Li Bing, et al. Study on inhomogeneity of interface microstructure and mechanical properties in explosive welding of titanium-steel clad[J]. Pressure Vessel Technology, 2021,38(12):15−21. (杨文月, 孙倩, 李冰, 等. 钛钢爆炸焊接结合界面组织及力学性能不均匀性研究[J]. 压力容器, 2021,38(12):15−21. doi: 10.3969/j.issn.1001-4837.2021.12.003 Yang Wenyue, Sun Qian, Li Bing, et al. Study on inhomogeneity of interface microstructure and mechanical properties in explosive welding of titanium-steel clad[J]. Pressure Vessel Technology, 2021, 38(12): 15-21. doi: 10.3969/j.issn.1001-4837.2021.12.003
[5]	Zhang Hangyong, Zang Wei, Guo Longchuang. Microstructure and mechanical properties of interface for titanium/steel clad tube sheet prepared by explosive welding[J]. Iron Steel Vanadium Titanium, 2019,40(6):48−51. (张杭永, 臧伟, 郭龙创. 爆炸焊接法制备的钛/钢复合管板界面组织与力学性能分析[J]. 钢铁钒钛, 2019,40(6):48−51. doi: 10.7513/j.issn.1004-7638.2019.06.010 Zhang Hangyong, Zang Wei, Guo Longchuang. Microstructure and mechanical properties of interface for titanium/steel clad tube sheet prepared by explosive welding[J]. Iron Steel Vanadium Titanium, 2019, 40(6): 48-51. doi: 10.7513/j.issn.1004-7638.2019.06.010
[6]	Shen Chunyu, Fan Keshe, Li Ying, et al. Research on residual stress distribution in explosive welding titanium steel clad plate[J]. China Chemical Industry Equipment, 2019,21(4):31−35. (沈春豫, 樊科社, 李莹, 等. 爆炸焊接钛/钢复合板残余应力分布状态研究[J]. 中国化工装备, 2019,21(4):31−35. Shen Chunyu, Fan Keshe, Li Ying, et al. Research on residual stress distribution in explosive welding titanium steel clad plate[J]. China Chemical Industry Equipment, 2019, 21(4): 31-35.
[7]	Tian Shiwei, Jiang Haitao, Liu Jixiong, et al. Rheological behavior and hot rolling process of titanium / steel clad plate[J]. Materials Reports, 2019,33(24):4141−4146. (田世伟, 江海涛, 刘继雄, 等. 钛钢复合板双金属的流变行为及轧制制备[J]. 材料导报, 2019,33(24):4141−4146. doi: 10.11896/cldb.18120063 Tian Shiwei, Jiang Haitao, Liu Jixiong, et al. Rheological behavior and hot rolling process of titanium / steel clad plate[J]. Materials Reports, 2019, 33(24): 4141-4146. doi: 10.11896/cldb.18120063
[8]	Huang Zhao, He Weijun, Chen Zejun. Interface structure and failure behavior of TA2/stainless steel/Q235 composite plate[J]. Transactions of Materials and Heat Treatment, 2021,42(11):11−19. (黄钊, 何维均, 陈泽军. TA2/不锈钢/Q235复合板的界面结构和失效行为[J]. 材料热处理学报, 2021,42(11):11−19. Huang Zhao, He Weijun, Chen Zejun. Interface structure and failure behavior of TA2/stainless steel/Q235 composite plate[J]. Transactions of Materials and Heat Treatment, 2021, 42(11): 11-19.
[9]	Yang Yun, Ding Wenhong, Wu Mengxian, et al. Influence of interfacial microstructure control on bonding strength of titanium-steel composite plate[J]. Hot Working Technology, 2023,(7):56−61. (杨赟, 丁文红, 吴梦先, 等. 界面组织调控对钛/钢复合板结合强度的影响[J]. 热加工工艺, 2023,(7):56−61. Yang Yun, Ding Wenhong, Wu Mengxian, et al. Influence of interfacial microstructure control on bonding strength of titanium-steel composite plate[J]. Hot Working Technology, 2023(7): 56-61.
[10]	Bai Yuliang, Li Jingkun, Liu Xuefeng, et al. Effect of induction heating temperature on the interface of cold−hot-rolled titanium/steel composite plates[J]. Chinese Journal of Engineering, 2020,42(12):1639−1646. (白于良, 李晶琨, 刘雪峰, 等. 感应加热温度对冷-热轧制成形钛/钢复合板界面的影响[J]. 工程科学学报, 2020,42(12):1639−1646. Bai Yuliang, Li Jingkun, Liu Xuefeng, et al. Effect of induction heating temperature on the interface of cold−hot-rolled titanium/steel composite plates[J]. Chinese Journal of Engineering, 2020, 42(12): 1639-1646.
[11]	Liu Xuefeng, Bai Yuliang, Li Jingkun, et al. Influence factors of interfacial bonding strength of cold rolled titanium / steel laminated composite plates[J]. Journal of Materials Engineering, 2020,48(7):119−126. (刘雪峰, 白于良, 李晶琨, 等. 冷轧成形钛/钢层状复合板界面结合强度的影响因素[J]. 材料工程, 2020,48(7):119−126. Liu Xuefeng, Bai Yuliang, Li Jingkun, et al. Influence factors of interfacial bonding strength of cold rolled titanium / steel laminated composite plates[J]. Journal of Materials Engineering, 2020, 48(7): 119-126.
[12]	Zhu Kunliang, Zhu Peixian, Zhou Shenggang, et al. Performance of Ti-Fe composite prepared by hot-pressing diffusion welding method[J]. Hot Working Technology, 2014,43(20):69−71,76. (朱坤亮, 竺培显, 周生刚, 等. 热压扩散焊接法制备钛-钢复合材料及性能研究[J]. 热加工工艺, 2014,43(20):69−71,76. Zhu Kunliang, Zhu Peixian, Zhou Shenggang, et al. Performance of Ti-Fe composite prepared by hot-pressing diffusion welding method[J]. Hot Working Technology, 2014, 43(20): 69-71, 76.
[13]	Hu Jie, Xie Rong, Du Xunbai. Processing technology of titanium steel clad plate and its application in ship and ocean engineering[J]. Jiangsu Ship, 2016,33(6):6−8,12. (胡杰, 谢荣, 杜训柏. 钛钢复合板加工技术及其在船海工程中的应用[J]. 江苏船舶, 2016,33(6):6−8,12. Hu Jie, Xie Rong, Du Xunbai. Processing technology of titanium steel clad plate and its application in ship and ocean engineering[J]. Jiangsu Ship, 2016, 33(6): 6-8, 12.
[14]	Wang Kuan, Zhu Haiping, Song Zhenli, et al. Review on characteristics of interface of titanium clad steel plate[J]. Journal of Functional Materials, 2017,48(4):4025−4032. (王宽, 朱海平, 宋振莉, 等. 钛钢复合板界面特征研究述评[J]. 功能材料, 2017,48(4):4025−4032. Wang Kuan, Zhu Haiping, Song Zhenli, et al. Review on characteristics of interface of titanium clad steel plate[J]. Journal of Functional Materials, 2017, 48(4): 4025-4032.