Citation: | Liu Shuang, Chen Huiqin, Cao Miao, Che Xin, Yang Fan, Feng Yi. Study on microstructure evolution and austenitizing process of 1800 MPa grade ultra-high strength hot stamping steels[J]. IRON STEEL VANADIUM TITANIUM, 2023, 44(6): 133-138. doi: 10.7513/j.issn.1004-7638.2023.06.019 |
[1] |
Zhang Y, Lai X, Zhu P. Lightweight design of automobile component using high strength steel based on dent resistance[J]. Materials & Design, 2006,27(1):64−68.
|
[2] |
Li Jixiong , Wang Daoyong . Study on application of MSOT method for lightweight design of automobile body structure[J]. Advances in Mechanical Engineering, 2020, 12(10): 1-15.
|
[3] |
Zheng Songlin. Lightweight design of automobile drive shaft based on the characteristics of low amplitude load strengthening[J]. Chinese Journal of Mechanical Engineering, 2011,24(6):1111. doi: 10.3901/CJME.2011.06.1111
|
[4] |
Novotny S, Geiger M. Process design for hydroforming of lightweight metal sheets at elevated temperatures[J]. Journal of Materials Processing Tech, 2003,138(1-3):594−599. doi: 10.1016/S0924-0136(03)00042-6
|
[5] |
Lechler J , Merklein M. Hot stamping of ultra high strength steels as a key technology for lightweight construction[C]// Materials Science & Technology Conference and Exhibition, MS&T'08. Germany: University Erlangen-Nuremberg, 2008.
|
[6] |
Mori K I. New hot stamping processes of automobile lightweight ultra-high strength steel parts[J]. Journal of the Japan Society for Technology of Plasticity, 2012,53(613):98−102. doi: 10.9773/sosei.53.98
|
[7] |
Xu Yunsong, Gong Yu, Du Hao, et al. A newly-designed hot stamping plus non-isothermal Q&P process to improve mechanical properties of commercial QP980 steel[J]. International Journal of Lightweight Materials and Manufacture, 2019,3(1):26−35.
|
[8] |
Hu Ping , Liang Ying, He Bin. Hot stamping advanced manufacturing technology of lightweight car body[C]//The Formability of High-Strength Steel for Hot Stamping. Singapore: Springer, 2017: 165-192.
|
[9] |
De Castro M R, Monteiro W A, Politano R. Enhancements on strength of body structure due to bake hardening effect on hot stamping steel[J]. The International Journal of Advanced Manufacturing Technology, 2019,100(1/4):771−782.
|
[10] |
Scharifi E, Schade T, Ademaj A, et al. Characterization of mechanical properties, macroscopic deformation behavior and microstructure of functionally graded 22MnB5 steel[J]. Steel Research International, 2021,92(7):16.
|
[11] |
Reitz A, Grydin O, Schaper M. Characterization of phase transformations during graded thermo-mechanical processing of press-hardening sheet steel 22MnB5[J]. Metallurgical and Materials Transactions A, 2020,51:5628−5638. doi: 10.1007/s11661-020-05976-x
|
[12] |
Zhang Y, Wang W, Liu K, et al. Thermomechanical analysis on the frictional contact behavior of a high-strength steel 22MnB5–die steel H13 tribopair at 800 °C by experiment and finite-element simulation[C]//ARCHIVE Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology , 2021, (208-210): 1994-1996.
|
[13] |
Kong Ling, Peng Yan. In situ observation on microstructure evolution of 22MnB5 in hot stamping process[J]. Metallurgical Research and Technology, 2019,116(2):209. doi: 10.1051/metal/2018082
|
[14] |
Liu S, Long M, Zhang S, et al. Study on the prediction of tensile strength and phase transition for ultra-high strength hot stamping steel[J]. Journal of Materials Research and Technology, 2020,9(6):14244−14253. doi: 10.1016/j.jmrt.2020.10.043
|
[15] |
Liu S, Ai S, Long M, et al. Evolution of microstructures and mechanical properties of Nb-V alloyed ultra-high strength hot stamping steel in austenitizing process[J]. Materials, 2022,15:8197. doi: 10.3390/ma15228197
|