Han Kexi. Discussion on the Application of Titanium Concentrates Pre-reduction in Electric Furnace Gas[J]. IRON STEEL VANADIUM TITANIUM, 2014, 35(6): 41-45. doi: 10.7513/j.issn.1004-7638.2014.06.009
Citation:
Han Kexi. Discussion on the Application of Titanium Concentrates Pre-reduction in Electric Furnace Gas[J]. IRON STEEL VANADIUM TITANIUM, 2014, 35(6): 41-45. doi: 10.7513/j.issn.1004-7638.2014.06.009
Han Kexi. Discussion on the Application of Titanium Concentrates Pre-reduction in Electric Furnace Gas[J]. IRON STEEL VANADIUM TITANIUM, 2014, 35(6): 41-45. doi: 10.7513/j.issn.1004-7638.2014.06.009
Citation:
Han Kexi. Discussion on the Application of Titanium Concentrates Pre-reduction in Electric Furnace Gas[J]. IRON STEEL VANADIUM TITANIUM, 2014, 35(6): 41-45. doi: 10.7513/j.issn.1004-7638.2014.06.009
Pangang Group Research Institute Co., Ltd., State Key Laboratory for Comprehensive Utilization of Vanadium and Titanium Resources, Panzhihua 617000, Sichuan, China
The paper introduced an efficient way to use electric furnace gas,provides data support for tita-nium slag process in future.Using thermodynamic calculation,relationship between pellet metallization rate and gas heat generated are obtained.According to the actual heat required in producing in metallized pel-let,relationship between gas heat generated smelting in metallized pellet and required for pellet are ac-cepted.The results show that no matter which level in pellet metallization rate,gas heat of generated smel-ting slag is lower than the actual required of metallized pellet.Thus,additional heat used to produced met-allized pellet are required.Also with the increasing pellet metallization rate,the more heat the pellets pro-duced.
DownLoad: