Effect of MgO Content on the Quality of Low-titanium Sinter

Liu Ran; Li Hongwei; Li Haojie; Li Yanjiang; Liu Song

doi:10.7513/j.issn.1004-7638.2015.03.015

Volume 36 Issue 3

Jun. 2015

Turn off MathJax

Article Contents

Article Navigation > IRON STEEL VANADIUM TITANIUM > 2015 > 36(3): 73-77

Liu Ran, Li Hongwei, Li Haojie, Li Yanjiang, Liu Song. Effect of MgO Content on the Quality of Low-titanium Sinter[J]. IRON STEEL VANADIUM TITANIUM, 2015, 36(3): 73-77. doi: 10.7513/j.issn.1004-7638.2015.03.015

Citation:

Liu Ran, Li Hongwei, Li Haojie, Li Yanjiang, Liu Song. Effect of MgO Content on the Quality of Low-titanium Sinter[J]. IRON STEEL VANADIUM TITANIUM, 2015, 36(3): 73-77. doi: 10.7513/j.issn.1004-7638.2015.03.015

Citation:

PDF( 2625 KB)

Effect of MgO Content on the Quality of Low-titanium Sinter

doi: 10.7513/j.issn.1004-7638.2015.03.015

1. School of Metallurgy and Energy Hebei United University, Tangshan 063009 Hebei, China;
2. Hebei iron and Steel Group Xuanhua Iron and Steel Company, Xuanhua 075100, Hebei, China

Received Date: 2015-03-14

Abstract

Abstract

In this paper the effects of different Mg O content on resulting sinter quality were investigated. The results show that with Mg O content increasing,sinter indexes are affected to different degrees. Appropriate Mg O content benefits to the yield,drum strength and the metallurgical properties of sinter. Considering the relationship among Mg O and parameters in the sintering process,the composition,yield,drum strength and the metallurgical properties of sinter,the optimum Mg O content should be at 2.50% to 3.00%.
- sinter,
- MgO,
- yield,
- drum index,
- metallurgical properties