Study on Preparation Technology of Titanium Oxycarbid Consumable Anode by Single Sintering Process

Zhou Yuchang

doi:10.7513/j.issn.1004-7638.2017.02.006

Volume 38 Issue 2

Apr. 2017

Turn off MathJax

Article Contents

Article Navigation > IRON STEEL VANADIUM TITANIUM > 2017 > 38(2): 37-40

Zhou Yuchang. Study on Preparation Technology of Titanium Oxycarbid Consumable Anode by Single Sintering Process[J]. IRON STEEL VANADIUM TITANIUM, 2017, 38(2): 37-40. doi: 10.7513/j.issn.1004-7638.2017.02.006

Citation:

Zhou Yuchang. Study on Preparation Technology of Titanium Oxycarbid Consumable Anode by Single Sintering Process[J]. IRON STEEL VANADIUM TITANIUM, 2017, 38(2): 37-40. doi: 10.7513/j.issn.1004-7638.2017.02.006

Citation:

PDF( 648 KB)

Study on Preparation Technology of Titanium Oxycarbid Consumable Anode by Single Sintering Process

doi: 10.7513/j.issn.1004-7638.2017.02.006

Zhou Yuchang^1,2

1. School of Chemical Engineering, Sichuan University, Chengdu 610065, Sichuan, China;
2. State Key Laboratory of Vanadium and Titanium Resources Comprehensive Utilization, Panzhihua 617000, Sichuan, China

Received Date: 2017-03-25

Abstract

Abstract

Titanium oxycarbid consumable anode was prepared by single sintering process with asphalt as additive agent.Electrochemical dissolution behaviors of titanium oxycarbid consumable anode in NaCl-KCl-TiCl_x molten salt system was researched.The results show that titanium oxycarbid consumable anode with 1.3 g/cm³ 1.4 g/cm³ of density and strength meeting the requirements of the electrolytic process can be obtained under the optimal conditions. The consumable anode prepared by single sintering process can normally dissolve in the molten salt systems.
- consumable anode,
- molten salt electrolysis,