Zhang Bin. Effects of Sintering Process on Properties of Titanium Alloy Auto Parts[J]. IRON STEEL VANADIUM TITANIUM, 2017, 38(4): 53-57. doi: 10.7513/j.issn.1004-7638.2017.04.011
Citation:
Zhang Bin. Effects of Sintering Process on Properties of Titanium Alloy Auto Parts[J]. IRON STEEL VANADIUM TITANIUM, 2017, 38(4): 53-57. doi: 10.7513/j.issn.1004-7638.2017.04.011
Zhang Bin. Effects of Sintering Process on Properties of Titanium Alloy Auto Parts[J]. IRON STEEL VANADIUM TITANIUM, 2017, 38(4): 53-57. doi: 10.7513/j.issn.1004-7638.2017.04.011
Citation:
Zhang Bin. Effects of Sintering Process on Properties of Titanium Alloy Auto Parts[J]. IRON STEEL VANADIUM TITANIUM, 2017, 38(4): 53-57. doi: 10.7513/j.issn.1004-7638.2017.04.011
Ti-6Al-4V-0.5In titanium alloy auto parts samples were prepared by discharge plasma sintering at various sintering temperatures and sintering pressures,and the effects of sintering process on the wear resistance and impact property of the samples were studied.The results show that with the increase of sintering temperature and sintering pressure,both the wear resistance and impact property of the samples first increase and then decrease.The optimal sintering temperature and sintering pressure are 875 ℃ and 45 MPa,respectively.
DownLoad: