Liu Donghui, Li Junhua, Peng Yue, Chen Jianjun, Li Bing, Li Yuqing. Effects of Processing Parameters on Fuel NOx in the Sintering Process[J]. IRON STEEL VANADIUM TITANIUM, 2020, 41(1): 70-74. doi: 10.7513/j.issn.1004-7638.2020.01.013
Citation:
Liu Donghui, Li Junhua, Peng Yue, Chen Jianjun, Li Bing, Li Yuqing. Effects of Processing Parameters on Fuel NOx in the Sintering Process[J]. IRON STEEL VANADIUM TITANIUM, 2020, 41(1): 70-74. doi: 10.7513/j.issn.1004-7638.2020.01.013
Liu Donghui, Li Junhua, Peng Yue, Chen Jianjun, Li Bing, Li Yuqing. Effects of Processing Parameters on Fuel NOx in the Sintering Process[J]. IRON STEEL VANADIUM TITANIUM, 2020, 41(1): 70-74. doi: 10.7513/j.issn.1004-7638.2020.01.013
Citation:
Liu Donghui, Li Junhua, Peng Yue, Chen Jianjun, Li Bing, Li Yuqing. Effects of Processing Parameters on Fuel NOx in the Sintering Process[J]. IRON STEEL VANADIUM TITANIUM, 2020, 41(1): 70-74. doi: 10.7513/j.issn.1004-7638.2020.01.013
Effects of processing parameters on emission concentration of the fuel NOx in the sintering process were investigated using tube furnace.The results show that the average concentration of fuel NOx increases first and then decreases with increasing the sintering temperature,reaching a maximum with the sintering temperature approximately at 1 100 ℃.As the holding time of high temperature and heating rate increase,the average concentration of fuel NOx decreases from 87 mg/m3 and 91 mg/m3 to 77 mg/m3 and 80 mg/m3,respectively.When the oxygen content is lower than 21%,the average concentration of fuel NOx has positive correlations with the oxygen content in the sintering process.The emission concentration of fuel NOx mainly depends on the formation and reduction of NOx in sintering process.Therefore,in the sintering process,the formation of NOx can be inhibited or reduced by controlling sintering temperature,increasing heating rate,prolonging high temperature time or decreasing oxygen content,then the discharge amount of NOx in the sintering flue gas can be reduced.