Citation: | Li Shuo, Xing Hongwei, Liu Chao, Lin Wenlong, Zhang Wei, Gu Shaopeng, Wang Hui, Pei Jingjing. Research on properties of air-quenched steel slag abrasives with different particle sizes[J]. IRON STEEL VANADIUM TITANIUM, 2023, 44(4): 96-102. doi: 10.7513/j.issn.1004-7638.2023.04.015 |
[1] |
Wu Yuedong, Peng Ben, Wu Long, et al. Review on global development of treatment and utilization of steel slag[J]. Environmental Engineering, 2021,39(1):161−165. (吴跃东, 彭犇, 吴龙, 等. 国内外钢渣处理与资源化利用技术发展现状综述[J]. 环境工程, 2021,39(1):161−165. doi: 10.13205/j.hjgc.202101025
Wu Yuedong, Peng Ben, Wu Long, et al. Review on global development of treatment and utilization of steel slag[J]. Environmental Engineering, 2021, 39(1): 161-165. doi: 10.13205/j.hjgc.202101025
|
[2] |
Ma Lintao, Sheng Guohua, Wang Xiaoyu, et al. Experimental study on the compressive strength of cement-based composites with super high volume of steel slag[J]. Concrete, 2022,(8):102−104. (马麟涛, 盛国华, 王肖宇, 等. 超高掺量钢渣水泥基复合材料抗压试验研究[J]. 混凝土, 2022,(8):102−104. doi: 10.3969/j.issn.1002-3550.2022.08.022
Ma Lintao, Sheng Guohua, Wang Xiaoyu, et al. Experimental study on the compressive strength of cement-based composites with super high volume of steel slag [J]. Concrete, 2022(8): 102-104. doi: 10.3969/j.issn.1002-3550.2022.08.022
|
[3] |
Yan Feng, Huang Xiaoming, Guo Rongxin, et al. Research status of improving volume stability of steel slag by pretreatment[J]. Iron and Steel, 2022,57(10):30−42. (颜峰, 黄小明, 郭荣鑫, 等. 预处理改善钢渣体积安定性的研究现状[J]. 钢铁, 2022,57(10):30−42.
Yan Feng, Huang Xiaoming, Guo Rongxin, et al. Research status of improving volume stability of steel slag by pretreatment[J]. Iron and Steel, 2022, 57(10): 30-42.
|
[4] |
Zhang Jun, Yan Dingliu, Qi Yuanhong, et al. Difficulty analysis on treatment and utilization of iron and steel smelting slag[J]. Iron and Steel, 2020,55(1):1−5. (张俊, 严定鎏, 齐渊洪, 等. 钢铁冶炼渣的处理利用难点分析[J]. 钢铁, 2020,55(1):1−5. doi: 10.13228/j.boyuan.issn0449-749x.20190171
Zhang Jun, Yan Dingliu, Qi Yuanhong, et al. Difficulty analysis on treatment and utilization of iron and steel smelting slag[J]. Iron and Steel, 2020, 55(1): 1-5. doi: 10.13228/j.boyuan.issn0449-749x.20190171
|
[5] |
Piatak N M, Parsons M S, Seal R R. Characteristics and environmental aspects of slag: A review[J]. Applied Geochemistry, 2015,57:236−266. doi: 10.1016/j.apgeochem.2014.04.009
|
[6] |
O’Connor J, Nguyen T B T, Honeyands T, et al. Production, characterization, utilization, and beneficial soil application of steel slag: A review[J]. Journal of Hazardous Materials, 2021,419:126478. doi: 10.1016/j.jhazmat.2021.126478
|
[7] |
Naidu T S, Sheridan C M, Dyk L D V. Basic oxygen furnace slag: Review of current and potential uses[J]. Minerals Engineering, 2020,149:106234. doi: 10.1016/j.mineng.2020.106234
|
[8] |
Ren Xu, Wang Huigang, Wu Yuedong, et al. Discussion on steel slag treatment and resource utilization under carbon peaking and carbon neutrality goals[J]. Environmental Engineering, 2022,40(8):220−224. (任旭, 王会刚, 吴跃东, 等. “双碳”目标下钢渣处理及资源化利用探讨[J]. 环境工程, 2022,40(8):220−224.
Ren Xu, Wang Huigang, Wu Yuedong, et al. Discussion on steel slag treatment and resource utilization under carbon peaking and carbon neutrality goals[J]. Environmental Engineering, 2022, 40(8): 220-224.
|
[9] |
Amran M, Murali G, Khalid N H A, et al. Slag uses in making an ecofriendly and sustainable concrete: A review[J]. Construction and Building Materials, 2021,272:121942. doi: 10.1016/j.conbuildmat.2020.121942
|
[10] |
Pan Enyi, Chen Hongtang, Guo Peiquan. Review on protective pretreatment technology on outer surface coating on ships[J]. Modern Manufacturing Technology and Equipment, 2020,283(6):40−43. (潘恩义, 陈洪堂, 郭培全. 舰船外表面涂层防护预处理技术的研究进展[J]. 现代制造技术与装备, 2020,283(6):40−43. doi: 10.3969/j.issn.1673-5587.2020.06.015
Pan Enyi, Chen Hongtang, Guo Peiquan. Review on protective pretreatment technology on outer surface coating on ships[J]. Modern Manufacturing Technology and Equipment, 2020, 283(6): 40-43. doi: 10.3969/j.issn.1673-5587.2020.06.015
|
[11] |
Tang Oujing. Research and development of blasting abrasive made of steelmaking slag[J]. Baosteel Technology, 2015,183(5):23−28. (唐欧靖. 钢渣型喷砂除锈材料的研究与应用开发[J]. 宝钢技术, 2015,183(5):23−28. doi: 10.3969/j.issn.1008-0716.2015.05.005
Tang Oujing. Research and development of blasting abrasive made of steelmaking slag[J]. Baosteel Technology, 2015, 183(5): 23-28. doi: 10.3969/j.issn.1008-0716.2015.05.005
|
[12] |
Zhong Peng, Zhou Li, Chang Lizhong, et al. Feasibility and application effect research of the wind quenching slag as sand blasting abrasive[J]. Surface Technology, 2014,43(2):49−54. (钟鹏, 周俐, 常立忠, 等. 风淬转炉渣作为喷砂磨料的可行性及效果研究[J]. 表面技术, 2014,43(2):49−54. doi: 10.16490/j.cnki.issn.1001-3660.2014.02.024
Zhong Peng, Zhou Li, Chang Lizhong, et al. Feasibility and application effect research of the wind quenching slag as sand blasting abrasive[J]. Surface Technology, 2014, 43(2): 49-54. doi: 10.16490/j.cnki.issn.1001-3660.2014.02.024
|
[13] |
Gu Wenfeng, Diao Jiang, Liu Liang, et al. Investigation of properties of air-quenched steel slag as sandblasting abrasive[J]. JOM, 2021,73(10):2995−2999. doi: 10.1007/s11837-021-04819-3
|
[14] |
Martins A C P, Franco C J M, Costa L C B, et al. Steel slags in cement-based composites: An ultimate review on characterization, applications and performance[J]. Construction and Building Materials, 2021,291:123265. doi: 10.1016/j.conbuildmat.2021.123265
|
[15] |
Wang Jun, Li Guangqiang, Yang Xueping, et al. Change of slag composition during electroslag remelting process and prediction of the dissolved oxygen content in steel.[J]. Journal of Iron and Steel Research, 2015,27(6):18−23. (王珺, 李光强, 杨雪萍, 等. 电渣重熔过程中渣成分变化及钢中氧含量预测[J]. 钢铁研究学报, 2015,27(6):18−23. doi: 10.13228/j.boyuan.issn1001-0963.20140136
Wang Jun, Li Guangqiang, Yang Xueping, et al. Change of slag composition during electroslag remelting process and prediction of the dissolved oxygen content in steel. [J]. Journal of Iron and Steel Research, 2015, 27(6): 18-23. doi: 10.13228/j.boyuan.issn1001-0963.20140136
|
[16] |
Schollbach K, Ahmed M J, Laan S R. The mineralogy of air granulated converter slag[J]. International Journal of Ceramic Engineering & Science, 2020,3(1):21−36.
|
[17] |
Huang Yi, Xu Guoping, Yang Wei. Comparative analysis of physicochemical properties and utilization way of steel slags treated with different methods[J]. Multipurpose Utilization of Mineral Resources, 2014,(6):62−66. (黄毅, 徐国平, 杨巍. 不同处理工艺的钢渣理化性质和应用途径对比分析[J]. 矿产综合利用, 2014,(6):62−66.
Huang Yi, Xu Guoping, Yang Wei. Comparative analysis of physicochemical properties and utilization way of steel slags treated with different methods[J]. Multipurpose Utilization of Mineral Resources, 2014(6): 62-66.
|
[18] |
Arifvianto B, Suyitno, Wibisono K A, et al. Influence of grit blasting treatment using steel slag balls on the subsurface microhardness, surface characteristics and chemical composition of medical grade 316L stainless steel[J]. Surface and Coatings Technology, 2012,210:176−182. doi: 10.1016/j.surfcoat.2012.09.014
|
[19] |
Pei Jingjing, Zhang Yuzhu, Xing Hongwei, et al. Beading mechanism and performance of porous steel slag microbead abrasive[J]. Crystals, 2021,11(11):1377. doi: 10.3390/cryst11111377
|
[20] |
Yang Gang, Fu Jianhua, Wang Hailong, et al. Research on the technology of steel slag applying to non-metallic blast-cleaning abrasive[J]. China Offshore Platform, 2012,27(1):54−56. (杨刚, 傅建华, 汪海龙, 等. 钢渣型砂用于非金属除锈磨料技术探讨[J]. 中国海洋平台, 2012,27(1):54−56. doi: 10.3969/j.issn.1001-4500.2012.01.012
Yang Gang, Fu Jianhua, Wang Hailong, et al. Research on the technology of steel slag applying to non-metallic blast-cleaning abrasive[J]. China Offshore Platform, 2012, 27(1): 54-56. doi: 10.3969/j.issn.1001-4500.2012.01.012
|
[21] |
Kang Yue, Liu Chao, Zhang Yuzhu, et al. Phase transition simulation of air quenching blast furnace slag during cooling and solidification[J]. China Metallurgy, 2022,32(5):116−124. (康月, 刘超, 张玉柱, 等. 气淬高炉熔渣冷却凝固相变特性仿真[J]. 中国冶金, 2022,32(5):116−124.
Kang Yue, Liu Chao, Zhang Yuzhu, et al. Phase transition simulation of air quenching blast furnace slag during cooling and solidification[J]. China Metallurgy, 2022, 32(5): 116-124.
|
[22] |
Rao Lei, Chen Guangyan, Zhou Chenhui, et al. Experimental research on steel slag as sand-blasting abrasive[J]. Journal of Anhui University of Technology(Natural Science), 2015,32(1):16−21. (饶磊, 陈广言, 周晨辉, 等. 钢渣用于喷砂磨料的试验研究[J]. 安徽工业大学学报(自然科学版), 2015,32(1):16−21.
Rao Lei, Chen Guangyan, Zhou Chenhui, et al. Experimental research on steel slag as sand-blasting abrasive[J]. Journal of Anhui University of Technology(Natural Science), 2015, 32(1): 16-21.
|