Hou Zewang, Wang Yongsheng, Wang Xinhua. Study on the Water Simulation of Blowing Argon in Slab Mould[J]. IRON STEEL VANADIUM TITANIUM, 2011, 32(1): 41-46.
Citation:
Hou Zewang, Wang Yongsheng, Wang Xinhua. Study on the Water Simulation of Blowing Argon in Slab Mould[J]. IRON STEEL VANADIUM TITANIUM, 2011, 32(1): 41-46.
Hou Zewang, Wang Yongsheng, Wang Xinhua. Study on the Water Simulation of Blowing Argon in Slab Mould[J]. IRON STEEL VANADIUM TITANIUM, 2011, 32(1): 41-46.
Citation:
Hou Zewang, Wang Yongsheng, Wang Xinhua. Study on the Water Simulation of Blowing Argon in Slab Mould[J]. IRON STEEL VANADIUM TITANIUM, 2011, 32(1): 41-46.
1. The State Key Laboratory for Advanced Iron and Steel Processes and Products, National Engineering Research Center of Continuous Casting Technology, Central Iron and Steel Reseach Institute, Beijing 100081, China;
2. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China
The method of water simulation of blowing argon in slab mould was set forth in the paper,and then the influence of blowing argon in slab mould on the flow field of steel/slag interface of the mould was mainly studied,and the effects of process parameters on the distribution of argon bubble were studied too,such as the mould width,casting speed,submergence depth of SEN,etc,which are all carried out with a full-size water model and the co ncave shape SEN with the angle of 15°.
DownLoad: