板坯结晶器内吹氩工艺研究

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

板坯结晶器内吹氩工艺研究

侯泽旺, 王永胜, 王新华

文章导航 > 钢铁钒钛 > 2011 > 32(1): 41-46

侯泽旺, 王永胜, 王新华. 板坯结晶器内吹氩工艺研究[J]. 钢铁钒钛, 2011, 32(1): 41-46.

引用本文:

侯泽旺, 王永胜, 王新华. 板坯结晶器内吹氩工艺研究[J]. 钢铁钒钛, 2011, 32(1): 41-46.

Hou Zewang, Wang Yongsheng, Wang Xinhua. Study on the Water Simulation of Blowing Argon in Slab Mould[J]. IRON STEEL VANADIUM TITANIUM, 2011, 32(1): 41-46.

Citation:

Hou Zewang, Wang Yongsheng, Wang Xinhua. Study on the Water Simulation of Blowing Argon in Slab Mould[J]. IRON STEEL VANADIUM TITANIUM, 2011, 32(1): 41-46.

侯泽旺, 王永胜, 王新华. 板坯结晶器内吹氩工艺研究[J]. 钢铁钒钛, 2011, 32(1): 41-46.

引用本文:

侯泽旺, 王永胜, 王新华. 板坯结晶器内吹氩工艺研究[J]. 钢铁钒钛, 2011, 32(1): 41-46.

Hou Zewang, Wang Yongsheng, Wang Xinhua. Study on the Water Simulation of Blowing Argon in Slab Mould[J]. IRON STEEL VANADIUM TITANIUM, 2011, 32(1): 41-46.

Citation:

Hou Zewang, Wang Yongsheng, Wang Xinhua. Study on the Water Simulation of Blowing Argon in Slab Mould[J]. IRON STEEL VANADIUM TITANIUM, 2011, 32(1): 41-46.

板坯结晶器内吹氩工艺研究

1. 先进钢铁流程及材料国家重点实验室, 钢铁研究总院连铸技术国家工程研究中心, 北京 100081;
2. 北京科技大学冶金与生态工程学院, 北京 100083

基金项目:

国家自然科学基金和宝山钢铁股份有限公司联合资助项目(50934009)

作者简介:
侯泽旺(1985-),男,贵州安顺人,硕士研究生,主要从事薄板坯连铸研究

中图分类号: TF777.1
计量
- 文章访问数: 23
- HTML全文浏览量: 2
- PDF下载量: 1
- 被引次数: 0
出版历程
- 收稿日期: 2010-09-18

Study on the Water Simulation of Blowing Argon in Slab Mould

1. The State Key Laboratory for Advanced Iron and Steel Processes and Products, National Engineering Research Center of Continuous Casting Technology, Central Iron and Steel Reseach Institute, Beijing 100081, China;
2. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China

摘要: 阐述了使用水模研究结晶器吹氩的方法,并在全比例水模型上采用15°凹底水口进行模拟,着重研究结晶器吹氩对板坯结晶器内钢/渣界面流态的影响,以及结晶器宽度、拉坯速度、水口浸入深度等工艺参数对结晶器内气泡分布的影响。
- 板坯结晶器 /
- 钢/渣界面 /
- 界面波动 /
- 界面最大流速 /
- 吹氩量
Abstract: The method of water simulation of blowing argon in slab mould was set forth in the paper,and then the influence of blowing argon in slab mould on the flow field of steel/slag interface of the mould was mainly studied,and the effects of process parameters on the distribution of argon bubble were studied too,such as the mould width,casting speed,submergence depth of SEN,etc,which are all carried out with a full-size water model and the co ncave shape SEN with the angle of 15°.
- slab mould /
- steel/slag interface /
- interfacial fluctuations /
- the max flow rates at slag/steel interface /
- argon flow rate

参考文献(0)

资源附件(0)

WeChat

点击查看大图

计量

文章访问数: 23
HTML全文浏览量: 2
PDF下载量: 1
被引次数: 0

/

下载: 全尺寸图片幻灯片

分享

用微信扫码二维码

分享至好友和朋友圈

返回

本系统由北京仁和汇智信息技术有限公司开发

x 关闭永久关闭

《钢铁钒钛》期刊新投审稿
系统上线公告