一次烧结成型制备碳氧钛可溶阳极工艺探索

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

一次烧结成型制备碳氧钛可溶阳极工艺探索

文章导航 > 钢铁钒钛 > 2017 > 38(2): 37-40

周玉昌. 一次烧结成型制备碳氧钛可溶阳极工艺探索[J]. 钢铁钒钛, 2017, 38(2): 37-40. doi: 10.7513/j.issn.1004-7638.2017.02.006

引用本文:

周玉昌. 一次烧结成型制备碳氧钛可溶阳极工艺探索[J]. 钢铁钒钛, 2017, 38(2): 37-40. doi: 10.7513/j.issn.1004-7638.2017.02.006

Zhou Yuchang. Study on Preparation Technology of Titanium Oxycarbid Consumable Anode by Single Sintering Process[J]. IRON STEEL VANADIUM TITANIUM, 2017, 38(2): 37-40. doi: 10.7513/j.issn.1004-7638.2017.02.006

Citation:

Zhou Yuchang. Study on Preparation Technology of Titanium Oxycarbid Consumable Anode by Single Sintering Process[J]. IRON STEEL VANADIUM TITANIUM, 2017, 38(2): 37-40. doi: 10.7513/j.issn.1004-7638.2017.02.006

周玉昌. 一次烧结成型制备碳氧钛可溶阳极工艺探索[J]. 钢铁钒钛, 2017, 38(2): 37-40. doi: 10.7513/j.issn.1004-7638.2017.02.006

引用本文:

周玉昌. 一次烧结成型制备碳氧钛可溶阳极工艺探索[J]. 钢铁钒钛, 2017, 38(2): 37-40. doi: 10.7513/j.issn.1004-7638.2017.02.006

Zhou Yuchang. Study on Preparation Technology of Titanium Oxycarbid Consumable Anode by Single Sintering Process[J]. IRON STEEL VANADIUM TITANIUM, 2017, 38(2): 37-40. doi: 10.7513/j.issn.1004-7638.2017.02.006

Citation:

Zhou Yuchang. Study on Preparation Technology of Titanium Oxycarbid Consumable Anode by Single Sintering Process[J]. IRON STEEL VANADIUM TITANIUM, 2017, 38(2): 37-40. doi: 10.7513/j.issn.1004-7638.2017.02.006

一次烧结成型制备碳氧钛可溶阳极工艺探索

doi: 10.7513/j.issn.1004-7638.2017.02.006

周玉昌^1,2

1. 四川大学化学工程学院, 四川成都 610065;
2. 钒钛资源综合利用国家重点实验室, 四川攀枝花 617000

中图分类号: TF823
计量
- 文章访问数: 37
- HTML全文浏览量: 15
- PDF下载量: 1
- 被引次数: 0
出版历程
- 收稿日期: 2017-03-25

Study on Preparation Technology of Titanium Oxycarbid Consumable Anode by Single Sintering Process

Zhou Yuchang^1,2

1. School of Chemical Engineering, Sichuan University, Chengdu 610065, Sichuan, China;
2. State Key Laboratory of Vanadium and Titanium Resources Comprehensive Utilization, Panzhihua 617000, Sichuan, China

摘要: 以沥青作为添加剂, 开展了一次烧结成型制备碳氧钛可溶阳极探索试验, 研究该种可溶阳极在NaCl-KCl-TiCl_x熔盐体系中的电化学溶解行为。结果表明:在较优的工艺条件下, 制备的一次烧结成型可溶阳极密度为1.3~1.4 g/cm³, 摔落强度符合电解要求;一次烧结成型可溶阳极在低价钛 (NaCl-KCl-TiCl_x) 熔盐体系中能实现稳定电化学溶解。
- 可溶阳极 /
- 熔盐电解 /
- 碳氧钛
Abstract: Titanium oxycarbid consumable anode was prepared by single sintering process with asphalt as additive agent.Electrochemical dissolution behaviors of titanium oxycarbid consumable anode in NaCl-KCl-TiCl_x molten salt system was researched.The results show that titanium oxycarbid consumable anode with 1.3 g/cm³ 1.4 g/cm³ of density and strength meeting the requirements of the electrolytic process can be obtained under the optimal conditions. The consumable anode prepared by single sintering process can normally dissolve in the molten salt systems.
- consumable anode /
- molten salt electrolysis /

参考文献(0)

资源附件(0)

WeChat

点击查看大图

计量

文章访问数: 37
HTML全文浏览量: 15
PDF下载量: 1
被引次数: 0

/

下载: 全尺寸图片幻灯片

分享

用微信扫码二维码

分享至好友和朋友圈

返回

本系统由北京仁和汇智信息技术有限公司开发

x 关闭永久关闭

《钢铁钒钛》期刊新投审稿
系统上线公告