[1] |
Martin G, Rentsch L, Hoeck M, et al. Lithium market research–global supply, future demand and price development[J]. Energy Storage Materials, 2017,6:171−179. doi: 10.1016/j.ensm.2016.11.004
|
[2] |
Swain B. Recovery and recycling of lithium: A review[J]. Separation and Purification Technology, 2017,172:388−403. doi: 10.1016/j.seppur.2016.08.031
|
[3] |
Zhang Y, Hu Y H, Sun N, et al. A novel precipitant for separating lithium from magnesium in high Mg/Li ratio brine[J]. Hydrometallurgy, 2019,187:125−133. doi: 10.1016/j.hydromet.2019.05.019
|
[4] |
Zhao X Y, Yang H C, Wang Y F, et al. Review on the electrochemical extraction of lithium from seawater/brine[J]. Journal of Electroanalytical Chemistry, 2019,850:113389. doi: 10.1016/j.jelechem.2019.113389
|
[5] |
Guo Z Y, Ji Z Y, Chen Q B, et al. Prefractionation of LiCl from concentrated seawater/salt lake brines by electrodialysis with monovalent selective ion exchange membranes[J]. Journal of Cleaner Production 2018, 193: 338-350.
|
[6] |
Chen S Q, Chen Z S, Wei Z W, et al. Titanium-based ionsieve with enhanced post-separation ability for high performance lithium recovery from geothermal water[J]. Chemical Engineering Journal, 2021,410:128320. doi: 10.1016/j.cej.2020.128320
|
[7] |
Dou M, Fyta M. Lithium adsorption on 2D transition metal dichalcogenides: Towards a descriptor for machine learned materials design[J]. Journal of Materials Chemistry A, 2020,8:23511−23518. doi: 10.1039/D0TA04834H
|
[8] |
Roobavannan S, Vigneswaran S, Naidu G. Enhancing the performance of membrane distillation and ion-exchange manganese oxide for recovery of waterand lithium from seawater[J]. Chemical Engineering Journal, 2020,396:125386. doi: 10.1016/j.cej.2020.125386
|
[9] |
Li X W, Chen L L, Chao Y H, et al. Amorphous TiO2‐derived large‐capacity lithium ion sieve for lithium recovery[J]. Chemical Engineering & Technology, 2020,43(9):1784−1791.
|
[10] |
Qiu Z W, Wang M Y, Chen Y, et al. Li4Mn5O12 doped cellulose acetate membrane with low Mn loss and high stability for enhancing lithium extraction from seawater[J]. Desalination, 2021,506:115003. doi: 10.1016/j.desal.2021.115003
|
[11] |
Zhang Q H, Li S P, Sun S Y, et al. Lithium selective adsorption on 1-D MnO2 nanostructure ion-sieve[J]. Advanced Powder Technology, 2009,20(5):432−437. doi: 10.1016/j.apt.2009.02.008
|
[12] |
Wang Q, Du X, Gao F F, et al. A novel H1.6Mn1.6O4/reduced graphene oxide composite film for selective electrochemical capturing lithium ions with low concentration[J]. Separation and Purification Technology, 2019,226:59−67. doi: 10.1016/j.seppur.2019.05.082
|
[13] |
Liu D F, Sun S Y, Yu J G. Li4Mn5O12 desorption process with acetic acid and Mn dissolution mechanism[J]. Journal of Chemical Engineering of Japan, 2019,52(3):274−279.
|
[14] |
Wei K, Zhou L H, Wang S, et al. Watermelon-like texture lithium titanate and silicon composite films as anodes for lithium-ion battery with high capacity and long cycle life[J]. Journal of Alloys and Compounds, 2021,885:160994. doi: 10.1016/j.jallcom.2021.160994
|
[15] |
Tamura N, Yoshinuma M, Yin X, et al. A new multi-tracer pellet injection for a simultaneous study of low- and mid/high-Z impurities in high-temperature plasmas[J]. The Review of Scientific Instruments, 2021,92(6):063516. doi: 10.1063/5.0043495
|
[16] |
Zhang J, Zhou C, Naenen V, et al. Facile synthesis of dual-phase lithium titanate nanowires as anode materials for lithium-ion battery[J]. Journal of Alloys and Compounds, 2021,875:160038. doi: 10.1016/j.jallcom.2021.160038
|
[17] |
Yuan J S, Yin H B, Ji Z Y, et al. Effective recycling performance of Li+ extraction from spinel-type LiMn2O4 with persulfate[J]. Industrial & Engineering Chemistry Research, 2014,53(23):9889−9896.
|
[18] |
Zhao Q, Gao J M, Guo Y, et al. Facile synthesis of magneticallyrecyclable Fe-doped lithium ion sieve and its Li adsorption performance[J]. Chemistry Letters, 2018,47(10):1308−1310. doi: 10.1246/cl.180593
|
[19] |
Meng Xiangkun, He Shuai, Liu Yinfeng, et al. Solid-state synthesis of doped lithium-titanium ion-sieve and its absorption properties[J]. Journal of Qingdao University of Science and Technology, 2021,42(2):66−72. (孟祥坤, 贺帅, 刘银凤, 等. 固相法合成掺杂型锂钛系离子筛及其吸附性能[J]. 青岛科技大学学报(自然科学版), 2021,42(2):66−72.Meng Xiangkun, He Shuai, Liu Yinfeng, et al. Solid-state synthesis of doped lithium-titanium ion-sieve and its absorption properties[J]. Journal of Qingdao University of Science and Technology, 2021, 42(2): 66-72.
|
[20] |
Onodera Y, Iwasaki T, Hayashi H, et al. A new inorganic titanium compound with high selective adsorbability for Li+[J]. Journal of the Ceramic Society of Japan, 1989,97:888−894.
|
[21] |
Zhang L, Zhou D, Yao Q, et al. Preparation of H2TiO3-lithium adsorbent by the sol-gel process and its adsorption performance[J]. Applied Surface Science, 2016,368:82−87. doi: 10.1016/j.apsusc.2016.01.203
|
[22] |
Liu Lijun. Progress in preparation of lithium ion sieve precursor[J]. Technology Innovation and Application, 2021,11(30):84−88. (刘鲤君. 锂离子筛前驱体制备方法研究进展[J]. 科技创新与应用, 2021,11(30):84−88.Liu Lijun. Progress in preparation of lithium ion sieve precursor[J]. Technology Innovation and Application, 2021, 11(30): 84-88.
|
[23] |
Yu Chenglong, Song Jie, Ning Qingju, et al. Research progress of the new H2TiO3 lithium ions sievee[J]. Journal of Shaanxi University of Science & Technology, 2021,39(1):140−152. (于成龙, 宋杰, 宁青菊, 等. H2TiO3新型锂离子筛研究进展[J]. 陕西科技大学学报, 2021,39(1):140−152.Yu Chenglong, Song Jie, Ning Qingju, et al. Research progress of the new H2TiO3lithium ions sieve[J]. Journal of Shanxi University of Science & Technology, 2021, 39(1): 140-152.
|
[24] |
Zhu Liangshi. Research progress of preparing nanometer copper oxide by template method[J]. Shandong Chemical Industry, 2020,49(18):81−83. (朱良师. 模板法制备纳米氧化铜的研究进展[J]. 山东化工, 2020,49(18):81−83. doi: 10.3969/j.issn.1008-021X.2020.18.032Zhu Liangshi. Research progress of preparing nanometer copper oxide by template method[J]. Shandong Chemical Industry, 2020, 49(18): 81-83. doi: 10.3969/j.issn.1008-021X.2020.18.032
|
[25] |
Gu D L, Sun W J, Han G F, et al. Lithium ion sieve synthesized via an improved solid state method and adsorption performance for west Taijinar salt lake brine[J]. Chemical Engineering Journal, 2018,350:474−483. doi: 10.1016/j.cej.2018.05.191
|
[26] |
Wang S L, Li P, Cui W W, et al. Hydrothermal synthesis of lithium-enriched beta-Li2TiO3 with an ion-sieve application: Excellent lithium adsorption[J]. RSC Advances, 2016,6(104):102608−102616. doi: 10.1039/C6RA18018C
|
[27] |
Xu X, Zhou Y, Fan M H, et al. Lithium adsorption performance of a three-dimensional porous H2TiO3-type lithium ion-sieve in strong alkaline Bayer liquor[J]. RSC Advances, 2017,7(31):18883−18891. doi: 10.1039/C7RA01056G
|
[28] |
Zhang LY, Liu W. A novel study on preparation of H2TiO3-lithium adsorbent with titanyl sulfate as titanium source by inorganic precipitation-peptization methord[J]. RSC Advances, 2018,8:1385−1391. doi: 10.1039/C7RA11430C
|
[29] |
Modabberi S, Namayandeh A, Setti M, et al. Genesis of the eastern iranian bentonite deposits[J]. Applied Clay Science, 2019,168:56−67. doi: 10.1016/j.clay.2018.10.011
|
[30] |
Liu Y L, Su Y P, Yin Y, et al. Research progress of bentonite modified cementitious materials[J]. Materials Reports, 2021,35(5):5040−5052.
|
[31] |
Wang K X, Ma H, Pu S Y, et al. Hybrid porous magnetic bentonite-chitosan beads for selective removal of radioactive cesium in water[J]. Journal of Hazardous Materials, 2019,362:160. doi: 10.1016/j.jhazmat.2018.08.067
|
[32] |
Hong Lei, Ding Qianyun, Sun Jianqiang, et al. Adsorption and removal of perfluorinated compounds in water by magnetic organic modified bentonite[J]. Journal of Lanzhou Jiaotong University, 2021,40(2):107−113. (洪雷, 丁倩云, 孙建强, 等. 磁化有机改性膨润土吸附水中全氟化合物的实验[J]. 兰州交通大学学报, 2021,40(2):107−113. doi: 10.3969/j.issn.1001-4373.2021.02.016Hong Lei, Ding Qianyun, Sun Jianqiang, et al. Adsorption and removal of perfluorinated compounds in water by magnetic organic modified bentonite[J]. Journal of Lanzhou Jiaotong University, 2021, 40(2): 107-113. doi: 10.3969/j.issn.1001-4373.2021.02.016
|
[33] |
Yu C L, Yanagisawa K, Kamiya S, et al. Monoclinic Li2TiO3 nano-particles via hydrothermal reaction: Processing and structure[J]. Ceramics International, 2014,40(1):1901−1908. doi: 10.1016/j.ceramint.2013.07.097
|
[34] |
Zhang L Y, Shui Y, Zhao L L, et al. Preparation of Ni-doped Li2TiO3 using an inorganic precipitation–peptization method[J]. Coatings, 2019,9(11):701−717. doi: 10.3390/coatings9110701
|
[35] |
Sternik D, Galaburda M, Bogatyrov V M, et al. Influence of the synthesis method on the structural characteristics of novel hybrid adsorbents based on bentonite[J]. Colloids and Interfaces, 2019,3(1):18. doi: 10.3390/colloids3010018
|
[36] |
Dai H J, Huang Y, Huang H H. Eco-friendly polyvinyl alcohol/carboxymethyl cellulose hydrogelsreinforced with graphene oxide and bentonite for enhanced adsorption of methylene blue[J]. Carbohydrate Polymers, 2018,185:1−11. doi: 10.1016/j.carbpol.2017.12.073
|
[37] |
Żymankowska-Kumona S, Holtzera M, Grabowski G. Thermal analysis of foundry bentonites[J]. Archives of Foundry Engineering, 2011,11:209−213.
|
[38] |
Islam M M, Bredow T. Lithium diffusion pathways in β-Li2TiO3: A theoretical study[J]. Journal of Physical Chemistry C, 2016,120(13):7061−7066. doi: 10.1021/acs.jpcc.6b02613
|
[39] |
Snyder M Q, Desisto W J, Tripp C P. An infrared study of the surface chemistry of lithium titanate spinel (Li4Ti5O12)[J]. Applied Surface Science, 2007,253(24):9336−9341. doi: 10.1016/j.apsusc.2007.05.065
|
[40] |
Marthi R, Asgar H, Gadikota G, et al. On the structure and lithium adsorption mechanism of layered H2TiO3[J]. ACS Applied Materials & Interfaces, 2021,13(7):8361−8369.
|
[41] |
Laumann A, Fehr K T, Wachsmann M, et al. Metastable formation of low temperature cubic Li2TiO3 under hydrothermal conditions—Its stability and structural properties[J]. Solid State Ionics, 2010,181(33-34):1525−1529. doi: 10.1016/j.ssi.2010.08.017
|
[42] |
Huang Z H, Li Y Z, Chen W J, et al. Modified bentonite adsorption of organic pollutants of dyewastewater[J]. Materials Chemistry and Physics, 2017,202:266−276. doi: 10.1016/j.matchemphys.2017.09.028
|