Effects of stress gradient and temperature on mechanical properties of GH4169 superalloy

Guo Xulong

doi:10.7513/j.issn.1004-7638.2024.02.024

Volume 45 Issue 2

Feb. 2024

Turn off MathJax

Article Contents

Article Navigation > IRON STEEL VANADIUM TITANIUM > 2024 > 45(2): 171-175, 204

Guo Xulong. Effects of stress gradient and temperature on mechanical properties of GH4169 superalloy[J]. IRON STEEL VANADIUM TITANIUM, 2024, 45(2): 171-175, 204. doi: 10.7513/j.issn.1004-7638.2024.02.024

Citation:

Guo Xulong. Effects of stress gradient and temperature on mechanical properties of GH4169 superalloy[J]. IRON STEEL VANADIUM TITANIUM, 2024, 45(2): 171-175, 204. doi: 10.7513/j.issn.1004-7638.2024.02.024

Citation:

PDF( 1961 KB)

Effects of stress gradient and temperature on mechanical properties of GH4169 superalloy

doi: 10.7513/j.issn.1004-7638.2024.02.024

Guo Xulong^{1, 2
,}

1.
Chengdu Advanced Metal Materials Industry Technology Research Institute Co., Ltd., Chengdu 610303, Sichuan, China
2.
State Key Laboratory of Meatl Material for Marine Equipment and Application, Anshan 114009, Liaoning, China

More Information

Received Date: 2022-03-20
Available Online: 2024-04-30
Publish Date: 2024-04-30

Abstract

Abstract

GH4169 alloy was obtained by a specific metallurgical process and tensile experiments were carried out at different temperature gradients of 550 ℃, 650 ℃ and 750 ℃ and different stress levels of 590 MPa, 690 MPa and 790 MPa. The mechanical properties of the alloy were obtained, which in turn provided guidance for the optimization of the smelting process. For the elevated temperature tensile test, with the increase of temperature the tensile strength of the steel decreases significantly, while the elongation and area shrinkage rate slightly increase, and no obvious change on the precipitation quantity and distribution of δ phase has been found, but the carbide precipitation phase decreases. During elevated temperature endurance test, at the given temperature with the increase of stress the time of permanent fracture decreases continuously. When the stress is given, with the increase of temperature the time of permanent fracture decreases sharply. Through this research the reason for the impoverishment of the γ" phase is explained.
- GH4169 alloy,
- temperature stretch,
- high temperature persistent,
- mechanical properties,
- precipitates

FullText(HTML)

References(13)

References

[1]	Wang Wen. Thermal deformation behavior and recrystallization model of GH4169 nickel-based superalloy[J]. Materials for Mechanical Engineering, 2020,44(9):6. (王稳. GH4169镍基高温合金的热变形行为与再结晶模型[J]. 机械工程材料, 2020,44(9):6. doi: 10.11973/jxgccl202009016 Wang Wen. Thermal deformation behavior and recrystallization model of GH4169 nickel-based superalloy[J]. Materials for Mechanical Engineering, 2020, 44(9): 6. doi: 10.11973/jxgccl202009016
[2]	Zeng Weihu, Zhou Tongjin, Zhang Yong, et al. Microstructure evolution of GH4169 alloy after high temperature, high stress and permanent deformation[J]. Casting Technology, 2018,39(12):2651−2655. (曾维虎, 周同金, 张勇, 等. GH4169合金高温高应力持久变形后的组织演变[J]. 铸造技术, 2018,39(12):2651−2655. Zeng Weihu , Zhou Tongjin , Zhang Yong, et al. Microstructure evolution of GH4169 alloy after high temperature, high stress and permanent deformation[J]. Casting Technology, 2018, 39(12): 2651-2655.
[3]	Zou Minming, Zhang Jun, Liu Lin, et al. The effect of melt overheating on the solidification structure and properties of nickel-based superalloys[J]. Materials Engineering, 2008,(5):71−74. (邹敏明, 张军, 刘林, 等. 熔体过热对镍基高温合金凝固组织及性能的影响研究[J]. 材料工程, 2008,(5):71−74. doi: 10.3969/j.issn.1001-4381.2008.05.017 Zou Minming, Zhang Jun, Liu Lin, et al. The effect of melt overheating on the solidification structure and properties of nickel-based superalloys[J]. Materials Engineering, 2008(5): 71-74. doi: 10.3969/j.issn.1001-4381.2008.05.017
[4]	Zhou Xiaoming, Wang Dianlong, Wang Yu, et al. Deformation behavior of non-metallic inclusions in nickel-based powder superalloys[J]. Failure Analysis and Prevention, 2008,3(3):23-27. (周晓明, 汪殿龙, 汪煜, 等. 非金属夹杂物在镍基粉末高温合金中的变形行为[J]. 失效分析与预防, 2008,3(3):23-27. Zhou Xiaoming, Wang Dianlong, Wang Yu, et al. Deformation behavior of non-metallic inclusions in nickel-based powder superalloys[J]. Failure Analysis and Prevention, 2008, 3(3): 5.
[5]	Liu Gang, Liu Lin, Zhang Shengxia, et al. Effects of Re and Ru on microstructure segregation of nickel-based single crystal super alloys[J]. Acta Metallurgical Sinica, 2012,48(7):845−852. (刘刚, 刘林, 张胜霞, 等. Re和Ru对镍基单晶高温合金组织偏析的影响[J]. 金属学报, 2012,48(7):845−852. Liu Gang, Liu Lin, Zhang Shengxia, et al. Effects of Re and Ru on microstructure segregation of nickel-based single crystal super alloys[J]. Acta Metallurgical Sinica, 2012, 48(7): 845-852.
[6]	Du Beining, Hu Ziyang, Sheng Liyuan, et al. Tensile, creep behavior and microstructure evolution of an as-cast Ni-based K417G polycrystalline superalloy[J]. Journal of Materials Science & Technology, 2018,34(10):95−106.
[7]	Ye Dalian, Gao Liqiang, Wang Ping, et al. Effect of cast and heat treatment processes on microstructure and properties of K4169 superalloy[J]. Solid State Phenomena, 2021,315:25−30. doi: 10.4028/www.scientific.net/SSP.315.25
[8]	Yu Huichen, Xie Shishu, Zhao Guangpu, et al. High temperature tensile and endurance properties of GH141 alloy[J]. Materials Engineering, 2003,(9):3−6. (于慧臣, 谢世殊, 赵光普, 等. GH141合金的高温拉伸及持久性能[J]. 材料工程, 2003,(9):3−6. doi: 10.3969/j.issn.1001-4381.2003.09.001 Yu Huicheng, Xie Shishu, Zhao Guangpu , et al. High temperature tensile and endurance properties of GH141 alloy[J]. Materials Engineering, 2003(9): 3-6. doi: 10.3969/j.issn.1001-4381.2003.09.001
[9]	Hu Renming, Xin Xin. The effect of Nb content on the structure and tensile properties of GH4169 alloy[J]. Baosteel Technology, 2020,210(2):35−38, 42. (胡仁民, 信欣. Nb含量对GH4169合金组织和拉伸性能的影响[J]. 宝钢技术, 2020,210(2):35−38, 42. doi: 10.3969/j.issn.1008-0716.2020.02.006 Hu Renming, Xin Xin. The effect of Nb content on the structure and tensile properties of GH4169 alloy[J]. Baosteel Technology, 2020, 210(2): 35-38, 42. doi: 10.3969/j.issn.1008-0716.2020.02.006
[10]	Gao Tianming, Cheng Xiaonong, Luo Rui, et al. The effect of aging treatment on the microstructure and high temperature tensile deformation behavior of GH4169 alloy[J]. Heat Treatment of Metals, 2020,45(8):126−130. (高天明, 程晓农, 罗锐, 等. 时效处理对GH4169合金显微组织及高温拉伸变形行为的影响[J]. 金属热处理, 2020,45(8):126−130. Gao Tianming, Cheng Xiaonong, Luo Rui, et al. The effect of aging treatment on the microstructure and high temperature tensile deformation behavior of GH4169 alloy[J]. Heat Treatment of Metals, 2020, 45(8): 126-130.
[11]	Xue Hao, Zhao Jingqi, Liu Yongkang, et al. δ-phase precipitation regularity of cold-rolled fine-grained GH4169 alloy plate and its effect on mechanical properties[J]. Transactions of Nonferrous Metals Society of China, 2020,30(12):3287−3295.
[12]	Yu Jian, Li Jiarong, Han Mei, et al. Study on anisotropy of endurance properties of nearly [001] oriented DD6 single crystal superalloy at 980 ℃/250 MPa[J]. Materials Engineering, 2012,(4):1−5. (喻健, 李嘉荣, 韩梅, 等. 近[001]取向DD6单晶高温合金980 ℃/250 MPa持久性能各向异性研究[J]. 材料工程, 2012,(4):1−5. doi: 10.3969/j.issn.1001-4381.2012.04.001 Yu Jian, Li Jiarong, Han Mei, et al. Study on anisotropy of endurance properties of nearly [001] oriented DD6 single crystal superalloy at 980℃/250 MPa[J]. Materials Engineering, 2012(4): 1-5. doi: 10.3969/j.issn.1001-4381.2012.04.001
[13]	Zhou Xiaoming, Xia Pengcheng. Microstructure change and fracture analysis of an oriented superalloy during endurance[J]. Failure Analysis and Prevention, 2008,3(2):1−5. (周晓明, 夏鹏成. 一种定向高温合金在持久过程中的组织变化及其断口分析[J]. 失效分析与预防, 2008,3(2):1−5. doi: 10.3969/j.issn.1673-6214.2008.02.001 Zhou Xiaoming, Xia Pengcheng. Microstructure change and fracture analysis of an oriented superalloy during endurance[J]. Failure Analysis and Prevention, 2008, 3(2): 1-5. doi: 10.3969/j.issn.1673-6214.2008.02.001