Citation: | Ding Xiaoming, Li Tao, Guo Xiaopei, Zhuang Qianyu, Liu Kai. Study on the composite inclusions of MnS-Al2O3 in wheel steel[J]. IRON STEEL VANADIUM TITANIUM, 2023, 44(4): 183-189. doi: 10.7513/j.issn.1004-7638.2023.04.026 |
[1] |
范新光. 列车车轮滚动接触疲劳裂纹萌生及扩展研究[D]. 北京: 北京交通大学, 2019.
Fan Xinguang. Research on rolling contact fatigue crack initiation and propagation of train wheels [D]. Beijing: Beijing Jiaotong University, 2019.
|
[2] |
Li Wei, Cheng Shengwei, Zhang Jinwen, et al. Research on technology of preventing rims crack from railway wheel fatigue[J]. Physical Testing and Measurement, 2019,37(5):32−37. (李伟, 成生伟, 张锦文, 等. 防止铁道车轮疲劳辋裂技术探讨[J]. 物理测试, 2019,37(5):32−37.
Li Wei, Cheng Shengwei, Zhang Jinwen, et al. Research on Technology of Preventing Rims Crack from Railway Wheel Fatigue [J]. Physical Testing and Measurement, 2019, 37(05): 32-37.
|
[3] |
丛韬. 铁路车轮超高周疲劳行为研究和寿命评估方法[D]. 北京:北京交通大学, 2019.
Cong Tao. Research on ultra-high cycle fatigue behavior and life evaluation method of railway wheels [D].Beijing :Beijing Jiaotong University, 2019.
|
[4] |
孟炜. 诱发车轮轮辋辋裂的夹杂物临界尺寸预测[D]. 成都: 西南交通大学, 2019.
Meng Wei. Prediction of critical size of inclusions induced wheel rim crack [D]. Chengdu: Southwest Jiaotong University, 2019.
|
[5] |
Mi G, Nan H, Liu Y, et al. Influence of inclusion on crack initiation in wheel rim[J]. Journal of Iron and Steel Research International, 2011,18(1):49−54. doi: 10.1016/S1006-706X(11)60010-1
|
[6] |
徐周. Mg处理对低碳微合金钢中夹杂物、组织及性能的影响[D]. 苏州: 苏州大学, 2018.
Xu Zhou. Effect of Mg treatment on inclusions, microstructure and properties of low carbon microalloyed steel [D]. Suzhou: Soochow University, 2018.
|
[7] |
Guo Zhenhe, Deng Liqin. Effect of magnesium and calcium treatment on inclusions and fatigue properties of wheel steel[J]. Baosteel Technology, 2016,(4):16−20. (郭振和, 邓丽琴. 镁钙处理对车轮钢中夹杂物及疲劳性能的影响[J]. 宝钢技术, 2016,(4):16−20.
Guo Zhenhe, Deng Liqin. Effect of Magnesium and Calcium Treatment on Inclusions and Fatigue Properties of Wheel Steel [J]. Baosteel Technology. 2016(04): 16-20.
|
[8] |
Tang Qingyu, Yang Jichun, Yang Wenkui, et al. Effect of rare earth Ce on microstructure and impact properties of CL50 wheel steel[J]. Journal of Inner Mongolia University of Science and Technology, 2017,36(3):221−224. (唐庆余, 杨吉春, 杨文魁, 等. 稀土Ce对CL50车轮钢显微组织和冲击性能的影响[J]. 内蒙古科技大学学报, 2017,36(3):221−224.
Tang Qingyu, Yang Jichun, Yang Wenkui, et al. Effect of Rare Earth Ce on microstructure and impact Properties of CL50 Wheel Steel [J]. Journal of Inner Mongolia University of Science and Technology, 2017, 36(03): 221-224.
|
[9] |
Wu Zhanfang , Liu Zhenyu , Qiu Shengtao, et al. Effect of composition and morphology of non-metallic inclusions on fracture toughness in as-cast AHSS[J], Metall. Res. Technol., 2019, 116: 623.
|
[10] |
余音宏. 硫含量对高速车轮钢第二相析出及力学性能的影响[D]. 昆明: 昆明理工大学, 2013.
Yu Yinhong. Effect of sulfur content on second phase precipitation and mechanical properties of high-speed wheel steel [D]. Kunming: Kunming University of Science and Technology, 2013.
|
[11] |
Lei Shaolong, Jiang Min, Yang Die, et al. Effects of oxides on MnS precipitation in Al deoxidized steel[J]. Journal of University of Science and Technology Beijing, 2013,35(11):1443−1449. (雷少龙, 姜敏, 杨叠, 等. Al脱氧钢中氧化物对MnS析出的影响[J]. 北京科技大学学报, 2013,35(11):1443−1449.
Lei Shaolong, Jiang Min, Yang Diai, et al. Effects of oxides on MnS precipitation in Al deoxidized steel [J]. Journal of University of Science and Technology Beijing, 2013, 35(11): 1443-1449.
|
[12] |
Hou Chuan’an, Huang Ye, Li Jingshe, et al. Effect of cooling rate on the inclusion ratio of MnS+Al2O3 composite in steel[J]. Industrial Heating, 2016,45(3):20−22. (侯传安, 黄野, 李京社, 等. 冷却速率对钢中MnS+Al2O3复合夹杂物包裹率的影响研究[J]. 工业加热, 2016,45(3):20−22.
Hou Chuan-an, Huang Ye, Li Jingshe, et al. Effect of Cooling Rate on the Inclusion Ratio of MnS+Al2 O3 Composite in Steel [J]. Industrial Heating. 2016, 45(03): 20-22.
|
[13] |
Shen Chang, Lu Qiang, Guo Junbo, et al. Process development and practice of forming MnS plastic inclusion in middle and high carbon aluminum killed steel[J]. Iron and Steel, 2021,56(12):62−67,74. (沈昶, 陆强, 郭俊波, 等. 中高碳铝镇静钢形成MnS塑性夹杂的工艺开发与实践[J]. 钢铁, 2021,56(12):62−67,74. doi: 10.13228/j.boyuan.issn0449-749x.20210210
Shen Chang, Lu Qiang, Guo Junbo, et al. Process Development and Practice of Forming MnS Plastic Inclusion in Middle and High Carbon Aluminum Killed Steel [J]. Iron and Steel. , 2021.56(12): 62-67, 74. doi: 10.13228/j.boyuan.issn0449-749x.20210210
|
[14] |
Li Li, Xue Dongmei, Pan Tao, et al. Effect of heating temperature on chemical metallurgy of high sulfur wheel steel inclusions[J]. Continuous Casting, 2017,42(3):43−48. (李丽, 薛东妹, 潘涛, 等. 加热温度对高硫车轮钢夹杂物化学冶金的影响[J]. 连铸, 2017,42(3):43−48.
Li Li, Xue Dongmei, Pan Tao, et al. Effect of Heating Temperature on Chemical Metallurgy of High Sulfur Wheel Steel inclusions [J]. Continuous Casting, 2017, 42(03): 43-48.
|
[15] |
李昭东. 新型高铁车轮材料的组织和性能调控研究[C]//第十一届中国钢铁年会论文集. 北京: 中国金属学会, 2017.
Li Zhaodong. Study on microstructure and property control of new high-speed railway wheel materials [C]//Proceedings of the 11th China Steel Annual Conference. Beijing: The Chinese Society for Metals, 2017.
|
[16] |
Li Shengjun, Ren Xuechong, Gao Kewei, et al. Effect of heat treatment on morphology and distribution of inclusions in wheel steel[J]. Journal of Materials and Heat Treatment, 2011,32(12):48−54. (李胜军, 任学冲, 高克玮, 等. 热处理对车轮钢中夹杂物的形态和分布的影响[J]. 材料热处理学报, 2011,32(12):48−54.
Li Shengjun, Ren Xuechong, Gao Kewei, et al. Effect of Heat Treatment on Morphology and Distribution of inclusions in Wheel Steel [J]. Journal of Materials and Heat Treatment. 2011, 32(12): 48-54.
|
[17] |
Chen P, Zhu C, Li G, et al. Effect of sulphur concentration on precipitation behaviors of MnS-containing inclusions in GCr15 bearing steels after LF refining[J]. ISIJ International, 2017,57(6):1019. doi: 10.2355/isijinternational.ISIJINT-2017-007
|
[18] |
Yang Jichun, Liu Xiangjun, Zhou Li, et al. Effect of rare earth Ce on mechanical properties and corrosion resistance of CL50D high-speed wheel steel[J]. Heat Treatment of Metals, 2019,44(4):15−18. (杨吉春, 刘香军, 周莉, 等. 稀土Ce对CL50D高速车轮钢力学性能及耐腐蚀性能的影响[J]. 金属热处理, 2019,44(4):15−18.
Yang Jichun, Liu Xiangjun, Zhou Li, et al. Effect of Rare Earth Ce on Mechanical Properties and Corrosion Resistance of CL50 D High-speed Wheel Steel [J]. Heat Treatment of Metals. 2019, 44(04): 15-18.
|
[19] |
Thomas B G, Samarasekera I V, Brimacombe J K. Mathematical model of the thermal processing of steel ingots: Part I. Heat flow model[J]. Metallurgical Transactions B, 1987,18(1):119−130. doi: 10.1007/BF02658437
|
[20] |
Chen J X. Manual of chart and data in common use of steel making[M]. Beijing: Metallurgical Industry Press, 2010.
|
[21] |
Tiller W A, Takahashi T. The electrostatic contribution in heterogeneous nucleation theory: Pure liquids[J]. Acta Metallurgica, 1969,17(4):483−496. doi: 10.1016/0001-6160(69)90030-3
|
[22] |
Turnbull D, Vonnegut B. Nucleation catalysis[J]. Industrial & Engineering Chemistry, 1952,44(6):1292−1298.
|
[23] |
Bramfitt B L. The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron[J]. Metallurgical Transactions, 1970,1(7):1987−1995. doi: 10.1007/BF02642799
|