Progress of laser additive manufactured high-performance metal structural materials

Wang Huaming; Wang Yudai

doi:10.7513/j.issn.1004-7638.2024.06.001

Volume 45 Issue 6

Dec. 2024

Turn off MathJax

Article Contents

Article Navigation > IRON STEEL VANADIUM TITANIUM > 2024 > 45(6): 1-6

Wang Huaming, Wang Yudai. Progress of laser additive manufactured high-performance metal structural materials[J]. IRON STEEL VANADIUM TITANIUM, 2024, 45(6): 1-6. doi: 10.7513/j.issn.1004-7638.2024.06.001

Citation:

Wang Huaming, Wang Yudai. Progress of laser additive manufactured high-performance metal structural materials[J]. IRON STEEL VANADIUM TITANIUM, 2024, 45(6): 1-6. doi: 10.7513/j.issn.1004-7638.2024.06.001

Citation:

PDF( 4045 KB)

Progress of laser additive manufactured high-performance metal structural materials

doi: 10.7513/j.issn.1004-7638.2024.06.001

Wang Huaming^,,
Wang Yudai

National Engineering Laboratory of Additive Manufacturing for Large Metallic Components, School of Materials Science and Engineering, Beihang University, Beijing 100191, China

More Information

Received Date: 2024-09-10
Available Online: 2024-12-30
Publish Date: 2024-12-30

Abstract

Abstract

Laser additive manufacturing technology on high-performance metallic components has shown great potential and broad application prospects in the manufacturing of key equipment. Beihang University has conducted deep research on laser additive manufactured large metallic components and achieved many research breakthroughs. In this article, the progress of laser additive manufactured high-performance metal structural materials was summarized. The non-equilibrium solidification and nucleation growth behavior were revealed, and the active control method on grain morphologies of titanium alloys and nickel-based superalloys was established. Besides, new strengthening and toughening mechanisms for laser additive manufactured materials were proposed, while titanium alloy and ultra-high strength steel specially for additive manufacturing were developed. Future research interests will continue to focus on fundamental issues such as laser/metal interaction behavior, material solidification and phase transition laws, as well as the design and development of high-performance new alloys based on extreme metallurgical conditions of laser additive manufacturing. Thus, the transformative potential of laser additive manufacturing technology in the manufacturing of large metal components for key equipments can be further unleashed.
- laser additive manufacturing,
- metal structural materials,
- microstructure,
- mechanical properties

FullText(HTML)

References(20)

References

[1]	Arcella F G, Froes F H. Producing titanium aerospace components from powder using laser forming[J]. JOM, 2000,52(5):28-30. doi: 10.1007/s11837-000-0028-x
[2]	Wang Huaming. Materials’ fundamental issues of laser additive manufacturing for high-performance large metallic components[J]. Acta Aeronautica et Astronautica Sinica, 2014,35(10):2690-2698. (王华明. 高性能大型金属构件激光增材制造: 若干材料基础问题[J]. 航空学报, 2014,35(10):2690-2698. Wang Huaming. Materials’ fundamental issues of laser additive manufacturing for high-performance large metallic components[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35（10）: 2690-2698.
[3]	Wang Xiangming, Su Yadong, Wu Bin. Application of additive manufacturing technology on aircraft structure development[J]. Aeronautical Manufacturing Technology, 2014(22):16-20. (王向明, 苏亚东, 吴斌. 增材技术在飞机结构研制中的应用[J]. 航空制造技术, 2014(22):16-20. doi: 10.3969/j.issn.1671-833X.2014.22.002 Wang Xiangming, Su Yadong, Wu Bin. Application of additive manufacturing technology on aircraft structure development[J]. Aeronautical Manufacturing Technology, 2014（22）: 16-20. doi: 10.3969/j.issn.1671-833X.2014.22.002
[4]	Lu Bingheng. Additive manufacturing——Current situation and future[J]. China Mechanical Engineering, 2020,31(1):19-23. (卢秉恒. 增材制造技术——现状与未来[J]. 中国机械工程, 2020,31(1):19-23. doi: 10.3969/j.issn.1004-132X.2020.01.003 Lu Bingheng. Additive manufacturing——Current situation and future[J]. China Mechanical Engineering, 2020, 31（1）: 19-23. doi: 10.3969/j.issn.1004-132X.2020.01.003
[5]	Tang Haibo, Wu Ning, Zhang Shuquan, et al. Research status and development trend of high performance large metallic components by laser additive manufacturing technique[J]. Journal of Netshape Forming Engineering, 2019,11(4):58-63. (汤海波, 吴宇, 张述泉, 等. 高性能大型金属构件激光增材制造技术研究现状与发展趋势[J]. 精密成形工程, 2019,11(4):58-63. doi: 10.3969/j.issn.1674-6457.2019.04.008 Tang Haibo, Wu Ning, Zhang Shuquan, et al. Research status and development trend of high performance large metallic components by laser additive manufacturing technique[J]. Journal of Netshape Forming Engineering, 2019, 11（4）: 58-63. doi: 10.3969/j.issn.1674-6457.2019.04.008
[6]	Gu Dongdong, Zhang Hongmei, Chen Hongyu, et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 2020,47(5):32-55. (顾冬冬, 张红梅, 陈洪宇, 等. 航空航天高性能金属材料构件激光增材制造[J]. 中国激光, 2020,47(5):32-55. Gu Dongdong, Zhang Hongmei, Chen Hongyu, et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 2020, 47（5）: 32-55.
[7]	Wang Huaming, Zhang Shuquan, Wang Tao, et al. Progress on solidification grain morphology and microstructure control of laser additively manufactured large titanium components[J]. Journal of Xihua University(Natural Science Edition), 2018,37(4):9-14. (王华明, 张述泉, 王韬, 等. 激光增材制造高性能大型钛合金构件凝固晶粒形态及显微组织控制研究进展[J]. 西华大学学报(自然科学版), 2018,37(4):9-14. doi: 10.3969/j.issn.1673-159X.2018.04.002 Wang Huaming, Zhang Shuquan, Wang Tao, et al. Progress on solidification grain morphology and microstructure control of laser additively manufactured large titanium components[J]. Journal of Xihua University(Natural Science Edition), 2018, 37（4）: 9-14. doi: 10.3969/j.issn.1673-159X.2018.04.002
[8]	Wang T, Zhu Y Y, Zhang S Q, et al. Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing[J]. Journal of Alloy and Compounds, 2015,632:505-513. doi: 10.1016/j.jallcom.2015.01.256
[9]	Zhu Yanyan, Tang Haibo, Li Zhuo, et al. Solidification behavior and grain morphology of laser additive manufacturing titanium alloys[J]. Journal of Alloy and Compounds, 2019,777:712-716. doi: 10.1016/j.jallcom.2018.11.055
[10]	Liang Yaojian, Cheng Xu, Li Jia, et al. Microstructural control during laser additive manufacturing of single-crystal nickel-base superalloys: New processing–microstructure maps involving powder feeding[J]. Materials & Design, 2017,130:197-207.
[11]	Wang Jiawei, Wang Huaming, Li Kangjie, et al. A new strategy to inhibit stray grain formation during laser directed solidification of single crystal superalloys[J]. Journal of Alloy and Compounds, 2022,906:163852. doi: 10.1016/j.jallcom.2022.163852
[12]	Wang Jiawei, Wang Huaming, Gao Hongwei, et al. Crystal growth for different substrate orientations during laser directed solidification of single crystal superalloys[J]. Journal of Alloy and Compounds, 2023,957:170219. doi: 10.1016/j.jallcom.2023.170219
[13]	Zhu Yanyan, Li Jia, Tian Xiangjun, et al. Microstructure and mechanical properties of hybrid fabricated Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy by laser additive manufacturing[J]. Materials Science and Engineering A, 2014,607:427-434. doi: 10.1016/j.msea.2014.04.019
[14]	Zhu Yanyan, Liu Dong, Tian Xiangjun, et al. Characterization of microstructure and mechanical properties of laser melting deposited Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy[J]. Materials and Design, 2014,56:445-453. doi: 10.1016/j.matdes.2013.11.044
[15]	Wang Yafei, Chen Rui, Cheng Xu, et al. Effects of microstructure on fatigue crack propagation behavior in a bi-modal TC11 titanium alloy fabricated via laser additive manufacturing[J]. Journal of Materials Science & Technology, 2019,35:403-408.
[16]	Zhang Jikui, Kong Xiangyi, Ma Shaojun, et al. Laser additive manufactured high strength-toughness TC11 titanium alloy: Mechanical properties and application in airframe load-bearing structure[J]. Acta Aeronautica et Astronautica Sinica, 2021,42(10):467-477. (张纪奎, 孔祥艺, 马少俊, 等. 激光增材制造高强高韧TC11钛合金力学性能及航空主承力结构应用分析[J]. 航空学报, 2021,42(10):467-477. Zhang Jikui, Kong Xiangyi, Ma Shaojun, et al. Laser additive manufactured high strength-toughness TC11 titanium alloy: Mechanical properties and application in airframe load-bearing structure[J]. Acta Aeronautica et Astronautica Sinica, 2021, 42（10）: 467-477.
[17]	Ran Xianzhe, Cheng Hao, Wang Huaming, et al. Corrosion properties of laser melting-deposited corrosion-resistant ultrahigh strength steel AerMet100[J]. Transactions of Materials and Heat Treatment, 2012,33(12):126-131. (冉先喆, 程昊, 王华明, 等. 激光熔化沉积AerMet100耐蚀超高强度钢的耐蚀性[J]. 材料热处理学报, 2012,33(12):126-131. Ran Xianzhe, Cheng Hao, Wang Huaming, et al. Corrosion properties of laser melting-deposited corrosion-resistant ultrahigh strength steel AerMet100[J]. Transactions of Materials and Heat Treatment, 2012, 33（12）: 126-131.
[18]	Ran Xianzhe, Liu Dong, Li Jia, et al. Effects of post homogeneity heat treatment processes on microstructure evolution behavior and tensile mechanical properties of laser additive manufactured ultrahigh-strength AerMet100 steel[J]. Materials Science & Engineering A, 2018,723:8-21.
[19]	Ran Xianzhe, Zhang Shuquan, Liu Dong, et al. Role of microstructural characteristics in combination of strength and fracture toughness of laser additively manufactured ultrahigh-strength AerMet100 steel[J]. Metallurgical and Materials Transactions A, 2021,52:1248-1259. doi: 10.1007/s11661-021-06148-1
[20]	Cui Can, Wang Xiangming, Wu Bin, et al. Study on application of laser deposited additive manufacturing technology on aircraft undercarriage[J]. Aeronautical Manufacturing Technology, 2018,61(10):74-79. (崔灿, 王向明, 吴斌, 等. 激光直接沉积成形增材制造技术在飞机起落架上的应用研究[J]. 航空制造技术, 2018,61(10):74-79. Cui Can, Wang Xiangming, Wu Bin, et al. Study on application of laser deposited additive manufacturing technology on aircraft undercarriage[J]. Aeronautical Manufacturing Technology, 2018, 61（10）: 74-79.