Volume 47 Issue 2
Apr.  2026
Turn off MathJax
Article Contents
Article Navigation >  IRON STEEL VANADIUM TITANIUM  > 2026  >  47(2): 116-131
HE Tongzheng, WU Jingxi, LI Zhixing, LUO Guojun, SHEN Xuanjin, TANG Liying, CHEN Yuyong. Research progress on advanced cutting technologies and cutting behavior of titanium alloys[J]. IRON STEEL VANADIUM TITANIUM, 2026, 47(2): 116-131. doi: 10.7513/j.issn.1004-7638.2026.02.014
Citation: HE Tongzheng, WU Jingxi, LI Zhixing, LUO Guojun, SHEN Xuanjin, TANG Liying, CHEN Yuyong. Research progress on advanced cutting technologies and cutting behavior of titanium alloys[J]. IRON STEEL VANADIUM TITANIUM, 2026, 47(2): 116-131. doi: 10.7513/j.issn.1004-7638.2026.02.014
shu

Research progress on advanced cutting technologies and cutting behavior of titanium alloys

doi: 10.7513/j.issn.1004-7638.2026.02.014
  • 1.

    Pangang Group Panzhihua Research Institute of Iron & Steel Co., Ltd., Panzhihua 617000, Sichuan, China

  • 2.

    Sichuan Provincial Engineering Research Center of Aerospace Titanium Alloy Precision Castparts, Panzhihua 617000, Sichuan, China

  • 3.

    Baoti Group Co., Ltd., Baoji 721014, Shaanxi, China

  • 4.

    Xa’an Superalloy Technologies Co., Ltd., Xa’an 710000, Shaanxi, China

  • 5.

    School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001

More Information
  • Received Date: 2025-11-12
  • Accepted Date: 2026-02-12
  • Rev Recd Date: 2026-02-03
    • Available Online: 2026-04-29
  • Publish Date: 2026-04-29
    Abstract
  • As demand rises for high-performance titanium alloy components in the aerospace sector, cutting technologies encounter major hurdles in delivering high precision and quality. This paper presents a systematic review of the latest advances in titanium alloy cutting technology, along with an in-depth analysis of research methodologies in cutting and chip characteristics. Specifically, it focuses on elucidating how cutting parameters affect cutting performance and tool wear. It also summarizes tool wear modes alongside corresponding improvement strategies. Given the limitations of present study, this paper proposes future development directions for titanium alloy cutting technologies, aiming to provide guidance for enhancing the cutting efficiency and surface integrity of titanium alloy components and to lay a theoretical foundation for subsequent relevant research.
    • FullText(HTML)
  • loading
    • References(103)
  • [1]
    HOU Z Q, LI B H, FENG G W, et al. Development and application of Ti-based alloy casting technologies in the field of aerospace[J]. Aerospace Shanghai (Chinese & English), 2022, 39: 1-14.
    [2]
    HE T Z, CHEN Y Y. Influence of mold design on shrinkage porosity of Ti-6Al-4V alloy ingots[J]. Metals, 2022, 12: 2122. doi: 10.3390/met12122122
    [3]
    WU J X, DU Z M, CHEN Y Y, et al. Simultaneously improving high-temperature strength and ductility of as-cast (TiB + TiC)/Ti-6Al-4Sn-7Zr-1Nb-1Mo-1W-0.2Si via triplex heat treatment[J]. Rare Metals, 2025, 44: 652-661.
    [4]
    HE T Z, CHEN Y Y, WU J X, et al. Optimization of the investment casting process and defect control for variable cross-section components of TC4 alloy[J]. Iron Steel Vanadium Titanium, 2024, 45: 46-54. (贺同正, 陈玉勇, 吴敬玺, 等. TC4合金变截面构件熔模铸造工艺优化及缺陷控制[J]. 钢铁钒钛, 2024, 45: 46-54. doi: 10.7513/j.issn.1004-7638.2024.03.007

    HE T Z, CHEN Y Y, WU J X, et al. Optimization of the investment casting process and defect control for variable cross-section components of TC4 alloy[J]. Iron Steel Vanadium Titanium, 2024, 45: 46-54. doi: 10.7513/j.issn.1004-7638.2024.03.007
    [5]
    FENG Q Y, TONG W X, WANG J, et al. Status quo and development tendency on the research of low cost titanium alloy[J]. Materials Reports, 2017, 31: 128-134. (冯秋元, 佟学文, 王俭, 等. 低成本钛合金研究现状与发展趋势[J]. 材料导报, 2017, 31: 128-134. doi: 10.11896/j.issn.1005-023X.2017.09.018

    FENG Q Y, TONG W X, WANG J, et al. Status quo and development tendency on the research of low cost titanium alloy[J]. Materials Reports, 2017, 31: 128-134. doi: 10.11896/j.issn.1005-023X.2017.09.018
    [6]
    ZHOU X K. Preparation, microstructure and properties of ultrafine grain gradient cemented carbide for high speed machining of titanium alloy[D]. Shenyang: Northeastern University, 2016. (周向葵. 钛合金高速切削用超细晶梯度硬质合金的制备及组织与性能分析[D]. 沈阳: 东北大学, 2016.

    ZHOU X K. Preparation, microstructure and properties of ultrafine grain gradient cemented carbide for high speed machining of titanium alloy[D]. Shenyang: Northeastern University, 2016.
    [7]
    LIU S F, SONG X, XUE T, et al. Application and development of titanium alloy and titanium matrix composites in aerospace field[J]. Journal of Aeronautical Materials, 2020, 40: 77-94. (刘世锋, 宋玺, 薛彤, 等. 钛合金及钛基复合材料在航空航天的应用和发展[J]. 航空材料学报, 2020, 40: 77-94.

    LIU S F, SONG X, XUE T, et al. Application and development of titanium alloy and titanium matrix composites in aerospace field[J]. Journal of Aeronautical Materials, 2020, 40: 77-94.
    [8]
    LI Y J, LIU K. Application and advanced bonding technology of titanium alloy in aviation industry[J]. Aeronautical Manufacturing Technology, 2015, 16: 34-37. (李亚江, 刘坤. 钛合金在航空领域的应用及其先进连接技术[J]. 航空制造技术, 2015, 16: 34-37. doi: 10.16080/j.issn1671-833x.2015.16.034

    LI Y J, LIU K. Application and advanced bonding technology of titanium alloy in aviation industry[J]. Aeronautical Manufacturing Technology, 2015, 16: 34-37. doi: 10.16080/j.issn1671-833x.2015.16.034
    [9]
    LUTJERING G, WILLIAMS J C. Titanium (engineering materials and processes)[M]. Manchester: Springer, 2003.
    [10]
    AN Z S, ZHAO W, HUAI J. Report on China titanium industry progress in 2024[J]. Titanium Industry Progress, 2025, 42: 40-48. (安仲生, 赵巍, 淮金. 2024 年中国钛工业发展报告[J]. 钛工业进展, 2025, 42: 40-48.

    AN Z S, ZHAO W, HUAI J. Report on China titanium industry progress in 2024[J]. Titanium Industry Progress, 2025, 42: 40-48.
    [11]
    JIA H, LU F S, HAO B. Report on China titanium industry in 2020[J]. Iron Steel Vanadium Titanium, 2021, 42: 1-9. (贾翃, 逯福生, 郝斌. 2020年中国钛工业发展报告[J]. 钢铁钒钛, 2021, 42: 1-9.

    JIA H, LU F S, HAO B. Report on China titanium industry in 2020[J]. Iron Steel Vanadium Titanium, 2021, 42: 1-9.
    [12]
    XIE W B. Study on cutting force and surface integrity of TC18 titanium alloy by longitudinal-torsional ultrasonic vibration-assisted milling[D]. Chongqing: Chongqing University, 2022. (谢伟博. 纵-扭超声振动铣削TC18钛合金切削力及表面完整性研究[D]. 重庆: 重庆大学, 2022.

    XIE W B. Study on cutting force and surface integrity of TC18 titanium alloy by longitudinal-torsional ultrasonic vibration-assisted milling[D]. Chongqing: Chongqing University, 2022.
    [13]
    AN Q, CHEN J, TAO Z, et al. Experimental investigation on tool wear characteristics of PVD and CVD coatings during face milling of Ti 6242S and Ti-555 titanium alloys[J]. International Journal of Refractory Metals and Hard Materials, 2020, 86: 105091. doi: 10.1016/j.ijrmhm.2019.105091
    [14]
    POULIQUEN A, CHANFREAU N, GALLEGOS-MAYORGA L, et al. Influence of the microstructure of a Ti5553 titanium alloy on chip morphology and cutting forces during orthogonal cutting[J]. Journal of Materials Processing Technology, 2023, 319: 118054. doi: 10.1016/j.jmatprotec.2023.118054
    [15]
    NIU Q L, RONG J, JING L, et al. Study on force-thermal characteristics and cutting performance of titanium alloy milled by ultrasonic vibration and minimum quantity lubrication[J]. Journal of Manufacturing Processes, 2023, 95: 115-130. doi: 10.1016/j.jmapro.2023.04.002
    [16]
    SUN T. Basic research on turn-milling of damage-tolerant titanium alloy[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2017. (孙涛. 损伤容限型钛合金正交车铣加工的基础研究[D]. 南京: 南京航空航天大学, 2017.

    SUN T. Basic research on turn-milling of damage-tolerant titanium alloy[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2017.
    [17]
    YANG D. Milling induced surface integrity and its effects on fatigue life of the titanium alloy Ti6Al4V[D]. Jinan: Shandong University, 2017. (杨东. 基于长疲劳寿命的钛合金Ti6A14V铣削加工表面完整性研究[D]. 济南: 山东大学, 2017.

    YANG D. Milling induced surface integrity and its effects on fatigue life of the titanium alloy Ti6Al4V[D]. Jinan: Shandong University, 2017.
    [18]
    ZHANG C M. Study on milling mechanism and process parameters optimization of TC18 titanium alloy[D]. Xi’an, Xi’an University of Technology, 2020. (张昌明. TC18钛合金铣削机理研究及工艺参数优化[D]. 西安: 西安理工大学, 2020.

    ZHANG C M. Study on milling mechanism and process parameters optimization of TC18 titanium alloy[D]. Xi’an, Xi’an University of Technology, 2020.
    [19]
    LI W P. Development and application of titanium alloys[J]. Light Metals, 2002, 5: 53-55. (李文平. 钛合金的应用现状及发展前景[J]. 轻金属, 2002, 5: 53-55. doi: 10.13662/j.cnki.qjs.2002.05.019

    LI W P. Development and application of titanium alloys[J]. Light Metals, 2002, 5: 53-55. doi: 10.13662/j.cnki.qjs.2002.05.019
    [20]
    SMITH S, TLUSTY J. Current trends in high-speed machining[J]. Asme Journal of Manufacturing Science & Engineering, 1997, 119: 664-666. doi: 10.1115/1.2836806
    [21]
    WEI M, CHEN X, FEI S. The chip-flow behaviors and formation mechanisms in the orthogonal cutting process of Ti6Al4V alloy[J]. Journal of the Mechanics & Physics of Solids, 2017, 98: 245-270. doi: 10.1016/j.jmps.2016.07.023
    [22]
    LIU L, ZHANG Y L, GUAN Y, et al. Experimental study on ultrasonic assisted cutting of TB9 titanium alloy[J]. Manufacturing Technology & Machine Tool, 2023, 1: 44-48. (刘乐, 张亚龙, 关悦, 等. TB9钛合金超声辅助切削试验研究[J]. 制造技术与机床, 2023, 1: 44-48. doi: 10.19287/j.mtmt.1005-2402.2023.01.006

    LIU L, ZHANG Y L, GUAN Y, et al. Experimental study on ultrasonic assisted cutting of TB9 titanium alloy[J]. Manufacturing Technology & Machine Tool, 2023, 1: 44-48. doi: 10.19287/j.mtmt.1005-2402.2023.01.006
    [23]
    XU J, FENG P F, FENG F, et al. Subsurface damage and burr improvements of aramid fiber reinforced plastics by using longitudinal-torsional ultrasonic vibration milling[J]. Journal of Materials Processing Technology, 2021, 297: 117265. doi: 10.1016/j.jmatprotec.2021.117265
    [24]
    WU C J, CHEN S J, CHENG K, et al. Innovative design and analysis of a longitudinal-torsional transducer with the shared node plane applied for ultrasonic assisted milling[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2019, 233: 4128-4139. doi: 10.1177/0954406218797962
    [25]
    ZHANG J G, CUI T, GE C, et al. Review of micro/nano machining by utilizing elliptical vibration cutting[J]. International Journal of Machine Tools and Manufacture, 2016, 106: 109-126. doi: 10.1016/j.ijmachtools.2016.04.008
    [26]
    XU W X, ZHANG L C. Ultrasonic vibration-assisted machining: principle, design and application[J]. Advances in Manufacturing, 2015, 3: 173-192. doi: 10.1007/s40436-015-0115-4
    [27]
    LONG Y P, CAI W, LI L, et al. Study on the effect of parallel ultrasonic vibration-assisted cutting on the surface integrity of titanium alloy shafts[J]. China Mechanical Engineering, 2026, 37(3): 726-734, 761. (龙玉朋, 蔡维, 李丽, 等. 并行超声振动切削对钛合金轴表面完整性的影响研究[J]. 中国机械工程,2026, 37(3): 726-734, 761.

    LONG Y P, CAI W, LI L, et al. Study on the effect of parallel ultrasonic vibration-assisted cutting on the surface integrity of titanium alloy shafts[J]. China Mechanical Engineering, 2026, 37(3): 726-734, 761.
    [28]
    SONG J J, ZHONG X J. Experiments on high-pressure cooling ultrasonic vibration-assisted cutting machining of titanium alloy[J]. Mechanical Management and Development, 2024, 39(4): 40-41,44. (宋佳佳, 钟旭佳. 钛合金高压冷却超声振动辅助切削加工实验[J]. 机械管理开发, 2024, 39(4): 40-41,44. doi: 10.16525/j.cnki.cn14-1134/th.2024.04.013

    SONG J J, ZHONG X J. Experiments on high-pressure cooling ultrasonic vibration-assisted cutting machining of titanium alloy[J]. Mechanical Management and Development, 2024, 39（4）: 40-41,44. doi: 10.16525/j.cnki.cn14-1134/th.2024.04.013
    [29]
    SCHULZ H, SPUR G. High speed turn-milling—a new precision manufacturing technology for the machining of rotationally symmetrical workpieces[J]. Annals of the CIRP, 1990, 39: 107-109. doi: 10.1016/s0007-8506(07)61013-0
    [30]
    SCHULZ H, KNEISEL T. Turn-milling of hardened steel-an alternative to turning[J]. Annals of the CIRP, 1994, 43: 93-96. doi: 10.1016/S0007-8506(07)62172-6
    [31]
    LIU G R, YANG D. Construction of low temperature constitutive model and numerical simulation of cryogenic cutting process for Ti6Al4V titanium alloy[J]. Journal of Central South University (Science and Technology), 2025, 56: 2248-2256. (刘根睿, 杨东. Ti6Al4V钛合金低温本构模型构建与低温切削过程数值仿真[J]. 中南大学学报(自然科学版), 2025, 56: 2248-2256. doi: 10.11817/j.issn.1672-7207.2025.06.010

    LIU G R, YANG D. Construction of low temperature constitutive model and numerical simulation of cryogenic cutting process for Ti6Al4V titanium alloy[J]. Journal of Central South University (Science and Technology), 2025, 56: 2248-2256. doi: 10.11817/j.issn.1672-7207.2025.06.010
    [32]
    BIAN X D, ZHAO W, HE N. Optimization of multi-objective parameters for green wet cutting of TC4 titanium alloy[J]. Mechanical Engineer, 2024, 6: 1-3,7. (卞向东, 赵威, 何宁. TC4钛合金绿色湿式切削加工多目标参数优化[J]. 机械工程师, 2024, 6: 1-3,7.

    BIAN X D, ZHAO W, HE N. Optimization of multi-objective parameters for green wet cutting of TC4 titanium alloy[J]. Mechanical Engineer, 2024, 6: 1-3,7.
    [33]
    ZHANG M W, GAO C, DING Y X, et al. Research progress and prospect of thermohydrogen treatment for free-cutting of large-scale titanium alloy[J]. Materials Reports, 2007, 21: 76-79. (张旻炜, 高操, 丁月霞, 等. 大尺寸钛合金易切削热氢处理技术进展与展望[J]. 材料导报, 2007, 21: 76-79. doi: 10.3321/j.issn:1005-023X.2007.08.020

    ZHANG M W, GAO C, DING Y X, et al. Research progress and prospect of thermohydrogen treatment for free-cutting of large-scale titanium alloy[J]. Materials Reports, 2007, 21: 76-79. doi: 10.3321/j.issn:1005-023X.2007.08.020
    [34]
    JIN H X, WEI K X, LI J M, et al. Research development of titanium alloy in aerospace industry[J]. The Chinese Journal of Nonferrous Metals, 2015, 25: 280-292. (金和喜, 魏克湘, 李建明, 等. 航空用钛合金研究进展[J]. 中国有色金属学报, 2015, 25: 280-292. doi: 10.16080/j.issn1671-833x.2024.01/02.066

    JIN H X, WEI K X, LI J M, et al. Research development of titanium alloy in aerospace industry[J]. The Chinese Journal of Nonferrous Metals, 2015, 25: 280-292. doi: 10.16080/j.issn1671-833x.2024.01/02.066
    [35]
    NING C Q, ZHOU Y. Development and research status of biomedical titanium alloys[J]. Materials Science & Technology, 2002, 10: 100-106. (宁聪琴, 周玉. 医用钛合金的发展及研究现状[J]. 材料科学与工艺, 2002, 10: 100-106. doi: 10.3969/j.issn.1005-0299.2002.01.026

    NING C Q, ZHOU Y. Development and research status of biomedical titanium alloys[J]. Materials Science & Technology, 2002, 10: 100-106. doi: 10.3969/j.issn.1005-0299.2002.01.026
    [36]
    LI L, SUN J K, MENG X J. Application state and prospects for titanium alloys[J]. Titanium Industry Progress, 2004, 21: 19-24. (李梁, 孙健科, 孟祥军. 钛合金的应用现状及发展前景[J]. 钛工业进展, 2004, 21: 19-24. doi: 10.3404/j.issn.1672-7649.2009.12.029

    LI L, SUN J K, MENG X J. Application state and prospects for titanium alloys[J]. Titanium Industry Progress, 2004, 21: 19-24. doi: 10.3404/j.issn.1672-7649.2009.12.029
    [37]
    LI S M, ZHANG D Y, LIU C J, et al. Influence of dynamic angles and cutting strain on chip morphology and cutting forces during titanium alloy Ti-6Al-4V vibration-assisted drilling[J]. Journal of Materials Processing Technology, 2021, 288: 116898. doi: 10.1016/j.jmatprotec.2020.116898
    [38]
    GHOLAMZADEN B, SOLEIMANIMEHR H. Finite element modeling of ultrasonic-assisted turning: cutting force and heat generation[J]. Machining science and technology, 2019, 23: 869-885. doi: 10.1080/10910344.2019.1636266
    [39]
    MORIWAKI T, SHAMOTO E. Ultrasonic elliptical vibration cutting[J]. CIRP Annals, 1995, 44: 31-34. doi: 10.1016/S0007-8506(07)62269-0
    [40]
    WANG X K, GUO Y L. Analysis of cutting force and residual stress in ultrasonic elliptic vibration milling of titanium alloy[J]. Mechanical Management and Development, 2024, 39: 42-43,46. (王绪科, 郭延磊. 超声椭圆振动铣削钛合金切削力和残余应力分析[J]. 机械管理开发, 2024, 39: 42-43,46. doi: 10.16525/j.cnki.cn14-1134/th.2024.08.016

    WANG X K, GUO Y L. Analysis of cutting force and residual stress in ultrasonic elliptic vibration milling of titanium alloy[J]. Mechanical Management and Development, 2024, 39: 42-43,46. doi: 10.16525/j.cnki.cn14-1134/th.2024.08.016
    [41]
    JAWAHIR I S, ATTIA H, BIERMANN D, et al. Cryogenic manufacturing processes[J]. CIRP Annals, 2016: 713-736.
    [42]
    HE A D. Investigation on processing mechanism and control of residual stress in CMQL machining[D]. Guangzhou: South China University of Technology, 2018. (贺爱东. CMQL切削机理及加工表面残余应力调控研究[D]. 广州: 华南理工大学, 2018.

    HE A D. Investigation on processing mechanism and control of residual stress in CMQL machining[D]. Guangzhou: South China University of Technology, 2018.
    [43]
    ZHAO W. Research on the green high speed machining of titanium alloy[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2006. (赵威. 基于绿色切削的钛合金高速切削机理研究[D]. 南京: 南京航空航天大学, 2006.

    ZHAO W. Research on the green high speed machining of titanium alloy[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2006.
    [44]
    BRIAN C L, WANG Z F, CHOLLOCOOP N. Hydrogen embrittlement of commercial purity titanium[J]. Corrosion Science, 2002, 44: 1875-1888. doi: 10.1016/S0010-938X(01)00159-7
    [45]
    BARRY J, BYRNE G, LENNON D. Observations on chip formation and acoustic emission in machining Ti-6Al-4V alloy[J]. International Journal of Machine Tools & Manufacture, 2001, 41: 1055-1070. doi: 10.1016/S0890-6955(00)00096-1
    [46]
    KISHAWYH A, BECZE C E, MCINTOSH D G. Tool performance and attainable surface quality during the machining of aerospace alloys using self-propelled rotary tools[J]. Journal of Materials Processing Technology, 2004, 152: 266-271. doi: 10.1016/j.jmatprotec.2003.11.011
    [47]
    LIN H S, WANG C Y, YUAN Y H, et al. Tool wear in Ti-6Al-4V alloy turning under oils on water cooling comparing with cryogenic air mixed with minimal quantity lubrication[J]. The International Journal of Advanced Manufacturing Technology, 2015, 81: 87-101. doi: 10.1007/s00170-015-7062-x
    [48]
    ZHAO W, GONG L, REN F, et al. Experimental study on chip deformation of Ti-6Al-4V titanium alloy in cryogenic cutting[J]. The International Journal of Advanced Manufacturing Technology, 2018, 96: 4021-4027. doi: 10.1007/s00170-018-1890-4
    [49]
    SUTTER G, LIST G. Very high speed cutting of Ti-6Al-4V titanium alloy-change in morphology and mechanism of chip formation[J]. International Journal of Machine Tools & Manufacture, 2013, 66: 37-43. doi: 10.1016/j.ijmachtools.2012.11.004
    [50]
    MOLINARI A, MUSQUAR C, SUTTER G. Adiabatic shear banding in high speed machining of Ti-6Al-4V: experiments and modeling[J]. International Journal of Plasticity, 2002, 18: 443-459. doi: 10.1016/s0749-6419(01)00003-1
    [51]
    WU H B, TO S. Serrated chip formation and their adiabatic analysis by using the constitutive model of titanium alloy in high speed cutting[J]. Journal of Alloys and Compounds, 2015, 629: 368-373. doi: 10.1016/j.jallcom.2014.12.230
    [52]
    LI L T. Study on dynamic mechanical properties and cutting behavior of titanium alloy[D]. Taiyuan: Taiyuan University of Technology, 2022. (李林涛. 钛合金动态力学性能及切削行为研究[D]. 太原: 太原理工大学, 2022.

    LI L T. Study on dynamic mechanical properties and cutting behavior of titanium alloy[D]. Taiyuan: Taiyuan University of Technology, 2022.
    [53]
    HUI X L, MU R K, BAI C Y, et al. Dynamic mechanical property and constitutive model for TC4 titanium alloy[J]. Journal of Vibration and Shock, 2016, 35: 161-168. (惠旭龙, 牟让科, 白春玉, 等. TC4钛合金动态力学性能及本构模型研究[J]. 振动与冲击, 2016, 35: 161-168. doi: 10.13465/j.cnki.jvs.2016.22.024

    HUI X L, MU R K, BAI C Y, et al. Dynamic mechanical property and constitutive model for TC4 titanium alloy[J]. Journal of Vibration and Shock, 2016, 35: 161-168. doi: 10.13465/j.cnki.jvs.2016.22.024
    [54]
    HE T, TANG Y X, WU H B, et al. Research and analysis of TC4 titanium alloy cutting based on crystal plasticity theory[J]. Journal of Physics: Conference Series, 2024, 2785: 012131. doi: 10.1088/1742-6596/2785/1/012131
    [55]
    ZHONG J, ZHAO X X, GOU G, et al. Establishment of dynamic material model and optimization of cutting parameters for TC4 titanium alloy[J]. Aviation Maintenance & Engineering, 2025, 2: 44-50. (钟杰, 赵星星, 苟刚, 等. TC4钛合金动态材料模型建立及切削参数优化[J]. 航空维修与工程, 2025, 2: 44-50. doi: 10.3969/j.issn.1672-0989.2025.02.014

    ZHONG J, ZHAO X X, GOU G, et al. Establishment of dynamic material model and optimization of cutting parameters for TC4 titanium alloy[J]. Aviation Maintenance & Engineering, 2025, 2: 44-50. doi: 10.3969/j.issn.1672-0989.2025.02.014
    [56]
    CHEN G, REN C Z, YANG X Y, et al. Finite element simulation of high-speed machining of titanium alloy (Ti-6Al-4V) based on ductile failure model[J]. The International Journal of Advanced Manufacturing Technology, 2011, 56: 1027-1038. doi: 10.1007/s00170-011-3233-6
    [57]
    CALAMAZ M, COUPARD D, GIROT F. A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti-6Al-4V[J]. International Journal of Machine Tools and Manufacture, 2008, 48: 275-288. doi: 10.1016/j.ijmachtools.2007.10.014
    [58]
    ZERILLI F J, ARMSTRONG R W. Dislocation-mechanics-based constitutive relations for material dynamics calculation[J]. Journal of Applied Physics, 1987, 61: 1816-1825. doi: 10.1063/1.338024
    [59]
    FOLLANSBEE P S, KOCKS U F. A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable[J]. Acta Metallurgica, 1988, 36: 81-93. doi: 10.1016/0001-6160(88)90030-2
    [60]
    KHAN A S, HUANG S J. Experimental and theoretical study of mechanical behavior of 1100 aluminum in the strain rate range 10–5-104 s–1[J]. International Journal of Plasticity, 1992, 8: 397-424. doi: 10.1016/0749-6419(92)90057-J
    [61]
    HUANG S, KHAN A S. Modeling the mechanical behavior of 1100-0 aluminum at different strain rates by the Bodner-Partom model[J]. International Journal of Plasticity, 1992, 8: 501-517. doi: 10.1016/0749-6419(92)90028-B
    [62]
    BODNER S R, PARTOM Y. Constitutive equations for elastic ± viscoplastic strain-hardening materials[J]. Journal of Applied Mechanics, 1975, 42: 385-389. doi: 10.1115/1.3423586
    [63]
    MEYERS M A. Dynamic behavior of materials[M]. America: John Wiley & Sons Incorporation, 1994.
    [64]
    UMBRELLO D. Finite element simulation of conventional and high speed machining of Ti6Al4V alloy[J]. Journal of Materials Processing Technology, 2008, 196: 79-87. doi: 10.1016/j.jmatprotec.2007.05.007
    [65]
    PEI L. Cutting mechanical properties and experimental study of high strength aviation titanium alloy TC21[D]. Ningbo: Ningbo University, 2020. (裴磊. 高强度航空钛合金TC21切削力学特征及实验研究[D]. 宁波: 宁波大学, 2020.

    PEI L. Cutting mechanical properties and experimental study of high strength aviation titanium alloy TC21[D]. Ningbo: Ningbo University, 2020.
    [66]
    TAY A O, STEVENSON M G, DAVIS G D, et al. A numerical method for calculating temperature distributions in machining, from force and shear angle measurements[J]. International Journal of Machine Tool Design and Research, 1976, 16: 335-349. doi: 10.1016/0020-7357(76)90043-3
    [67]
    ÖZEL T, SIMA M, SRIVASTAVA A K, et al. Investigations on the effects of multi-layered coated inserts in machining Ti-6Al-4V alloy with experiments and finite element simulations[J]. CIRP Annals-Manufacturing Technology, 2010, 59: 77-82. doi: 10.1016/j.cirp.2010.03.055
    [68]
    SHAH S R, LIU G L, ÖZEL T. Finite element simulations of chip serration in titanium alloy cutting by considering material failure[J]. Procedia CIRP, 2019, 82: 320-325. doi: 10.1016/j.procir.2019.04.153
    [69]
    MIAO X C, ZHANG X, LIU X, et al. Numerical analysis of performance of different micro-grooved tools for cutting titanium alloy Ti-6Al-4V[J]. The International Journal of Advanced Manufacturing Technology, 2020, 111: 1037-1054. doi: 10.1007/s00170-020-06134-8
    [70]
    HUANG S W, TAO B, LI J D, et al. Estimation of the time and space-dependent heat flux distribution at the tool-chip interface during turning using an inverse method and thin film thermocouples measurement[J]. The International Journal of Advanced Manufacturing Technology, 2018, 99: 1531-1543. doi: 10.1007/s00170-018-2585-6
    [71]
    NOROUZIFARD V, HAMEDI M. A three-dimensional heat conduction inverse procedure to investigate tool-chip thermal interaction in machining process[J]. The International Journal of Advanced Manufacturing Technology, 2014, 74: 1637-1648. doi: 10.1007/s00170-014-6119-6
    [72]
    EZUGWU E O, WANG Z M. Titanium alloys and their machinability-a review[J]. Journal of Materials Processing Technology, 1997, 68: 262-274. doi: 10.1016/S0924-0136(96)00030-1
    [73]
    LI A H, ZHAO J, ZHENG H G, et al. Chip formation in high-speed milling of titanium alloy with PCD tools[J]. Materials Science Forum, 2014, 800-801: 150-154.
    [74]
    VYAS A, SHAW M C. Mechanics of saw-tooth chip formation in metal cutting[J]. Journal of Manufacturing Science and Engineering, 1999, 121: 163-172. doi: 10.1115/1.2831200
    [75]
    ZENER C, HOLLOMON J H. Problems in non-elastic deformation of metals[J]. Journal of Applied Physics, 1946, 17: 69-82. doi: 10.1063/1.1707696
    [76]
    RITTEL D, WANG Z G. Thermo-mechanical aspects of adiabatic shear failure of AM50 and Ti6Al4V alloys[J]. Mechanics of Materials, 2008, 40: 629-635. doi: 10.1016/j.mechmat.2008.03.002
    [77]
    LÜ D S, WANG B S, HOU J M, et al. Characteristics of chip formation and its effects on cutting force and tool wear/damage in milling Ti-25V-15Cr (Ti40) beta titanium alloy[J]. The International Journal of Advanced Manufacturing Technology, 2023, 124: 2279-2288. doi: 10.1007/s00170-022-10637-x
    [78]
    ZAN S S, LIU G Y, LIAO Z Y, et al. Inverse size effect and deformation mechanism in Ti-6Al-4V cutting process-investigation on effect of bimodal microstructure on machining[J]. CIRP Annals - Manufacturing Technology, 2023, 72: 41-44. doi: 10.1016/j.cirp.2023.04.042
    [79]
    GENTE A, HOFFMEISTER H W, EVANS C J. Chip formation in machining Ti6A14V at extremely high cutting speeds[J]. Annals of CIRP, 2001, 50: 49-52. doi: 10.1016/S0007-8506(07)62068-X
    [80]
    MOTONISHIS, HARA Y, ISODA S, et al. Study on machining of titanium and its alloys[J]. Kobelco Technology Review, 1987, 2: 28-31.
    [81]
    LI J Q, XU B C. Study on adiabatic shearing sensitivity of titanium alloy in the process of different cutting speeds[J]. International Journal of Advanced Manufacturing Technology, 2017, 93: 1-7. doi: 10.1007/s00170-017-0641-2
    [82]
    WU H B, ZHANG S J. Effects of cutting conditions on the milling process of titanium alloy Ti6Al4V[J]. International Journal of Advanced Manufacturing Technology, 2015, 77: 2235-2240. doi: 10.1007/s00170-014-6645-2
    [83]
    BROWN M, SAOUBOI R M, CRAWFORTH P, et al. On deformation characterization of machined surfaces and machining-induced white layers in a milled titanium alloy[J]. Journal of Materials Processing Technology, 2022, 299: 117378. doi: 10.1016/j.jmatprotec.2021.117378
    [84]
    XUE C Y, LI A H, ZHOU Y M, et al. Phase transformation influence of machined surface layer in high-speed milling of Ti-6Al-4V alloy[J]. Tool Engineering, 2021, 55: 25-30. (薛超义, 李安海, 周咏辉, 等. 切削速度对钛合金高速铣削加工表面层相变的影响[J]. 工具技术, 2021, 55: 25-30. doi: 10.3969/j.issn.1000-7008.2021.11.004

    XUE C Y, LI A H, ZHOU Y M, et al. Phase transformation influence of machined surface layer in high-speed milling of Ti-6Al-4V alloy[J]. Tool Engineering, 2021, 55: 25-30. doi: 10.3969/j.issn.1000-7008.2021.11.004
    [85]
    SATYANARAYANA K, GOPAL A V, BABU P B. Analysis for optimal decisions on turning Ti-6Al-4V with Taguchi-grey method[J]. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, 2014, 228: 152-157.
    [86]
    HUANG B. Research on difficult-to-cut materials processing technology based on titanium[D]. Nanjing: Nanjing University of Science and Technology, 2015. (黄蓓. 基于钛合金的难加工材料切削加工工艺研究[D]. 南京: 南京理工大学, 2015.

    HUANG B. Research on difficult-to-cut materials processing technology based on titanium[D]. Nanjing: Nanjing University of Science and Technology, 2015.
    [87]
    HAN J H. Measurement and application of cutting tool temperature based on near-infrared fiber-optic sensing[D]. Wuhan: Huazhong University of Science and Technology, 2021. (韩京辉. 基于近红外光纤传感的切削刀具温度测量与应用研究[D]. 武汉: 华中科技大学, 2021.

    HAN J H. Measurement and application of cutting tool temperature based on near-infrared fiber-optic sensing[D]. Wuhan: Huazhong University of Science and Technology, 2021.
    [88]
    WU D, HE Y, ZHAO C L. Simulation and experiment of high-speed cutting of coated tool for TC4 titanium alloy[J]. Modern Machinery, 2025, 1: 52-57. (吴东, 何垚, 赵陈磊. 面向TC4钛合金的涂层刀具高速切削仿真与试验[J]. 现代机械, 2025, 1: 52-57. doi: 10.13667/j.cnki.52-1046/th.2025.01.023

    WU D, HE Y, ZHAO C L. Simulation and experiment of high-speed cutting of coated tool for TC4 titanium alloy[J]. Modern Machinery, 2025, 1: 52-57. doi: 10.13667/j.cnki.52-1046/th.2025.01.023
    [89]
    LI Y, LI W J, YANG Z C, et al. The effect of cutting parameters on machined surface microstructure during high speed milling of titanium alloy TC17[J]. Advanced Materials Research, 2012, 443-444: 133-137.
    [90]
    CORDUAN N, HIMBART T, POULACHON G, et al. Wear mechanisms of new tool materials for Ti6A14V high performance machining[J]. Annals of the CIRP, 2003, 52: 73-76. doi: 10.1016/S0007-8506(07)60534-4
    [91]
    WANG X Q. Study on tribological behavior and tool life in Ti6AI4V high performance machining[D]. Jinan: Shandong University, 2009. (王晓琴. 钛合金Ti6A14V高效切削刀具摩擦磨损特性及刀具寿命研究[D]. 济南: 山东大学, 2009.

    WANG X Q. Study on tribological behavior and tool life in Ti6AI4V high performance machining[D]. Jinan: Shandong University, 2009.
    [92]
    ALI M H, KHIDHIR B A, ANSARI M N M, et al. FEM to predict the effect of feed rate on surface roughness with cutting force during face milling of titanium alloy[J]. HBRC Journal, 2013, 9: 263-269. doi: 10.1016/j.hbrcj.2013.05.003
    [93]
    SULAIMAN S, ROSHAN A, BORAZJANI S. Effect of cutting parameters on cutting temperature of TiAl6V4 alloy[J]. Applied Mechanics and Materials, 2013, 392: 68-72. doi: 10.4028/www.scientific.net/AMM.392.68
    [94]
    LÜ C, XU S X. Simulation and numerical analysis of cutting temperature field of TC4 titanium alloy[J]. Aviation Precision Manufacturing Technology, 2024, 60: 5-9. (吕偿, 徐盛学. TC4钛合金铣削温度场仿真与数值分析[J]. 航空精密制造技术, 2024, 60: 5-9. doi: 10.3969/j.issn.1003-5451.2024.01.003

    LÜ C, XU S X. Simulation and numerical analysis of cutting temperature field of TC4 titanium alloy[J]. Aviation Precision Manufacturing Technology, 2024, 60: 5-9. doi: 10.3969/j.issn.1003-5451.2024.01.003
    [95]
    YANG D, LIU Z Q. Surface topography analysis and cutting parameters optimization for peripheral milling titanium alloy Ti-6Al-4V[J]. International Journal of Refractory Metals and Hard Materials, 2015, 51: 192-200. doi: 10.1016/j.ijrmhm.2015.04.001
    [96]
    YUAN Y F, CHEN W Y, ZHANG W Y. Experimental study on tool wear in cutting titanium alloy Ti6Al4V[J]. Advanced Materials Research, 2011, 239-242: 2011-2014.
    [97]
    RASHID R A R, SUN S, WANG G, et al. An investigation of cutting forces and cutting temperatures during laser-assisted machining of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy[J]. International Journal of Machine Tools & Manufacture, 2012, 63: 58-69. doi: 10.1016/j.ijmachtools.2012.06.004
    [98]
    JIANG Y J, KONG F S, WANG W, et al. Research on new cutting tool technology for new high-strength titanium alloy[J]. Tool Engineering, 2024, 58: 106-109. (姜怡君, 孔繁锦, 王伟, 等. 新型高强度钛合金切削刀具技术研究[J]. 工具技术, 2024, 58: 106-109.

    JIANG Y J, KONG F S, WANG W, et al. Research on new cutting tool technology for new high-strength titanium alloy[J]. Tool Engineering, 2024, 58: 106-109.
    [99]
    JIANG Z H, WANG L L, SHI L, et al. Study on tool wear mechanism and characteristics of carbide tools in cutting Ti6Al4V[J]. Journal of Mechanical Engineering, 2014, 50: 178-184. (姜增辉, 王琳琳, 石莉, 等. 硬质合金刀具切削Ti6Al4V的磨损机理及特征[J]. 机械工程学报, 2014, 50: 178-184. doi: 10.3901/JME.2014.01.178

    JIANG Z H, WANG L L, SHI L, et al. Study on tool wear mechanism and characteristics of carbide tools in cutting Ti6Al4V[J]. Journal of Mechanical Engineering, 2014, 50: 178-184. doi: 10.3901/JME.2014.01.178
    [100]
    WANG Z G, RAHMAN M, WONG Y S. Tool wear characteristics of binderless CBN tools used in high-speed milling of titanium alloys[J]. Wear, 2005, 258: 752-758. doi: 10.1016/j.wear.2004.09.066
    [101]
    SU Y S. Research on machining of titanium alloy using cutting tool with surface texture[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2015. (苏永生. 表面织构刀具切削钛合金的基础研究[D]. 南京: 南京航空航天大学, 2015.

    SU Y S. Research on machining of titanium alloy using cutting tool with surface texture[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2015.
    [102]
    ZHOU X K, XU Z F, WANG K, et al. One-step Sinter-HIP method for preparation of functionally graded cemented carbide with ultrafine grains[J]. Ceramics International, 2014, 42: 5362-5367. doi: 10.1016/j.ceramint.2015.12.069
    [103]
    ZHOU X K, WANG K, XU Z F, et al. Effect of powder particle size on gradient formation and grain growth in ultrafine crystalline gradient cemented carbide[J]. International Journal of Refractory Metals and Hard Materials, 2016, 56: 63-68. doi: 10.1016/j.ijrmhm.2015.11.013
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(10)  / Tables(2)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (55) PDF downloads(10) Cited by()
    Proportional views
    Related

    Address：Editorial Office of Iron Steel Vanadium Titanium, Technology Development Research Center, Pangang Group Panzhihua Iron & Steel Research Institute Co., Ltd., 90 Taoyuan Street, East District, Panzhihua, Sichuan 617000, China

    Post Code：617000Tel：0812-3380763,3380539,3380764蜀ICP备05030275号-5川公网安备 51040202000080号

    Website Copyright: Editorial Office of Iron Steel Vanadium Titanium

    E-mail alert RSS

    Supported by: Beijing Renhe Information Technology Co. Ltd  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return